Ethylene diacrylate

Modify Date: 2024-01-05 07:42:52

Ethylene diacrylate structure	Common Name	Ethylene diacrylate
	CAS Number	26570-48-9	Molecular Weight	170.163
	Density	1.1±0.1 g/cm3	Boiling Point	223.9±13.0 °C at 760 mmHg
	Molecular Formula	(C₂H₄O)nC₆H₆O₃	Melting Point	12-17 ºC
	MSDS	Chinese USA	Flash Point	104.9±18.2 °C
	Symbol	GHS05, GHS07	Signal Word	Danger

Name	Poly(oxy-1,2-ethanediyl), α-(1-oxo-2-propen-1-yl)-ω-[(1-oxo-2-propen-1-yl)oxy]
Synonym	More Synonyms

Density	1.1±0.1 g/cm3
Boiling Point	223.9±13.0 °C at 760 mmHg
Melting Point	12-17 ºC
Molecular Formula	(C₂H₄O)nC₆H₆O₃
Molecular Weight	170.163
Flash Point	104.9±18.2 °C
Exact Mass	170.057907
LogP	1.68
Appearance of Characters	Granular Solid \| White to off-white
Vapour Pressure	0.1±0.4 mmHg at 25°C
Index of Refraction	1.447
Storage condition	?20°C
Water Solubility	H2O: soluble \| Soluble in water.

Ethylene diacrylate MSDS(Chinese)

Symbol	GHS05, GHS07
Signal Word	Danger
Hazard Statements	H315-H317-H318
Precautionary Statements	P280-P305 + P351 + P338 + P310-P333 + P313
Personal Protective Equipment	Eyeshields;Faceshields;full-face respirator (US);Gloves;multi-purpose combination respirator cartridge (US);type ABEK (EN14387) respirator filter
Hazard Codes	Xi
Risk Phrases	41-43-38
Safety Phrases	26-36/37/39
RIDADR	NONH for all modes of transport
WGK Germany	1

Characterization of pore structure in biologically functional poly(2-hydroxyethyl methacrylate)-poly(ethylene glycol) diacrylate (PHEMA-PEGDA).

PLoS ONE 9(5) , e96709, (2014)

A copolymer composed of poly(2-hydroxyethyl methacrylate) (PHEMA) and poly(ethylene glycol) diacrylate (PEGDA) (PHEMA-PEGDA) is structurally versatile. Its structure can be adjusted using the followin...

A cell culture substrate with biologically relevant size-scale topography and compliance of the basement membrane.

Langmuir 30 , 2101-8, (2014)

A growing body of literature broadly documents that a wide array of fundamental cell behaviors are modulated by the physical attributes of the cellular microenvironment, yet in vitro assays are typica...

Rapid Software-Based Design and Optical Transient Liquid Molding of Microparticles.

Adv. Mater. 27 , 7970-8, (2016)

Microparticles with complex 3D shape and composition are produced using a novel fabrication method, optical transient liquid molding, in which a 2D light pattern exposes a photopolymer precursor strea...

ethyleneglycol diacrylate

Poly(ethylene glycol) diacrylate

1,2-Ethanediyl bisacrylate

ethane-1,2-diyl bisprop-2-enoate

Ethylene diacrylate

ethylene glycol diacrylate

1,2-ethanediyl diacrylate

ETHYLENE GLYCOL DIPROPENOATE

2-Propenoic acid, 1,2-ethanediyl ester

Ethane-1,2-diyl bisacrylate

MFCD00081876