Boc-(S)-3-Amino-4-(3-trifluoromethyl-phenyl)-butyric acid

Modify Date: 2024-01-27 16:52:55

Boc-(S)-3-Amino-4-(3-trifluoromethyl-phenyl)-butyric acid Structure
Boc-(S)-3-Amino-4-(3-trifluoromethyl-phenyl)-butyric acid structure
Common Name Boc-(S)-3-Amino-4-(3-trifluoromethyl-phenyl)-butyric acid
CAS Number 270065-77-5 Molecular Weight 347.329
Density 1.3±0.1 g/cm3 Boiling Point 426.6±45.0 °C at 760 mmHg
Molecular Formula C16H20F3NO4 Melting Point N/A
MSDS USA Flash Point 211.8±28.7 °C

 Names

Name Boc-(S)-3-amino-4-(3-trifluoromethylphenyl)-butyric acid
Synonym More Synonyms

 Chemical & Physical Properties

Density 1.3±0.1 g/cm3
Boiling Point 426.6±45.0 °C at 760 mmHg
Molecular Formula C16H20F3NO4
Molecular Weight 347.329
Flash Point 211.8±28.7 °C
Exact Mass 347.134430
PSA 75.63000
LogP 3.61
Vapour Pressure 0.0±1.1 mmHg at 25°C
Index of Refraction 1.495
Storage condition 2-8°C

 MSDS


SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifiers
: (S)-Boc-3-(trifluoromethyl)-β-Homophe-OH
Product name
REACH No.: A registration number is not available for this substance as the substance
or its uses are exempted from registration, the annual tonnage does not
require a registration or the registration is envisaged for a later
registration deadline.
CAS-No.: 270065-77-5
Relevant identified uses of the substance or mixture and uses advised against
Identified uses: Laboratory chemicals, Manufacture of substances



SECTION 2: Hazards identification
Classification of the substance or mixture
Not a hazardous substance or mixture according to Regulation (EC) No 1272/2008
This substance is not classified as dangerous according to Directive 67/548/EEC.
Label elements
Other hazards - none

SECTION 3: Composition/information on ingredients
Substances
Synonyms: (S)-3-(Boc-amino)-4-[3-(trifluoromethyl)phenyl]butyric acid
Boc-3-(trifluoromethyl)-L-β-homophenylalanine
Formula: C26H22F3NO4
Molecular Weight: 347,33 g/mol
CAS-No.: 270065-77-5
No components need to be disclosed according to the applicable regulations.

SECTION 4: First aid measures
Description of first aid measures
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration.
In case of skin contact
Wash off with soap and plenty of water.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
Indication of any immediate medical attention and special treatment needed
no data available

SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Carbon oxides, nitrogen oxides (NOx), Hydrogen fluoride
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available

SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Avoid dust formation. Avoid breathing vapours, mist or gas.
For personal protection see section 8.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Sweep up and shovel. Keep in suitable, closed containers for disposal.
Reference to other sections
For disposal see section 13.

SECTION 7: Handling and storage
Precautions for safe handling
Provide appropriate exhaust ventilation at places where dust is formed.Normal measures for preventive fire
protection.
For precautions see section 2.2.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Store under inert gas.
Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated

SECTION 8: Exposure controls/personal protection
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
General industrial hygiene practice.
Personal protective equipment
Eye/face protection
Use equipment for eye protection tested and approved under appropriate government standards
such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Full contact
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min
Material tested:Dermatril® (KCL 740 / Z677272, Size M)
Splash contact
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min
Material tested:Dermatril® (KCL 740 / Z677272, Size M)
data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 87300, test method: EN374
If used in solution, or mixed with other substances, and under conditions which differ from EN 374,
contact the supplier of the CE approved gloves. This recommendation is advisory only and must
be evaluated by an industrial hygienist and safety officer familiar with the specific situation of
anticipated use by our customers. It should not be construed as offering an approval for any
specific use scenario.
Body Protection
Choose body protection in relation to its type, to the concentration and amount of dangerous
substances, and to the specific work-place., The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Respiratory protection is not required. Where protection from nuisance levels of dusts are desired,
use type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and
approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Do not let product enter drains.

SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
a) AppearanceForm: powder
Colour: off-white
b) Odourno data available
c) Odour Thresholdno data available
d) pHno data available
e) Melting point/freezing156,3 °C
point
f) Initial boiling point and no data available
boiling range
g) Flash pointno data available
h) Evapouration rateno data available
i) Flammability (solid, gas) no data available
j) Upper/lowerno data available
flammability or
explosive limits
k) Vapour pressureno data available
l) Vapour densityno data available
m) Relative densityno data available
n) Water solubilityno data available
o) Partition coefficient: n- no data available
octanol/water
p) Auto-ignitionno data available
temperature
q) Decompositionno data available
temperature
r) Viscosityno data available
s) Explosive propertiesno data available
t) Oxidizing propertiesno data available
Other safety information
no data available

SECTION 10: Stability and reactivity
Reactivity
no data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
no data available
Conditions to avoid
no data available
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
Other decomposition products - no data available
In the event of fire: see section 5

SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitisation
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC:No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Additional Information
RTECS: Not available

SECTION 12: Ecological information
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted
Other adverse effects
no data available

SECTION 13: Disposal considerations
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company.
Contaminated packaging
Dispose of as unused product.

SECTION 14: Transport information
UN number
ADR/RID: -IMDG: -IATA: -
UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA:Not dangerous goods
Transport hazard class(es)
ADR/RID: -IMDG: -IATA: -
Packaging group
ADR/RID: -IMDG: -IATA: -
Environmental hazards
ADR/RID: noIMDG Marine pollutant: noIATA: no
Special precautions for user
no data available



SECTION 15 - REGULATORY INFORMATION
N/A


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

Personal Protective Equipment Eyeshields;Gloves;type N95 (US);type P1 (EN143) respirator filter
Hazard Codes Xi
Safety Phrases 22-24/25
RIDADR NONH for all modes of transport
WGK Germany 3
HS Code 2924299090

 Customs

HS Code 2924299090
Summary 2924299090. other cyclic amides (including cyclic carbamates) and their derivatives; salts thereof. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:6.5%. General tariff:30.0%

 Synonyms

Pentanedioic acid, 3-amino-2-[3-(trifluoromethyl)phenyl]-, 1-(1,1-dimethylethyl) ester, (3S)-
Boc-b-HoPhe(3-CF3)-OH
Boc-(S)-3-Amino-4-(3-trifluoromethylphenyl)butyricacid
Benzenebutanoic acid, β-[[(1,1-dimethylethoxy)carbonyl]amino]-3-(trifluoromethyl)-, (βS)-
RARECHEM AK PT B025
(3S)-3-Amino-5-[(2-methyl-2-propanyl)oxy]-5-oxo-4-[3-(trifluoromethyl)phenyl]pentanoic acid
BOC-(S)-3-AMINO-4-(3-TRIFLUOROMETHYLPHENYL)BUTANOIC ACID
BOC-PHE(3-CF 3)(C*CH2)OH
(3S)-3-({[(2-Methyl-2-propanyl)oxy]carbonyl}amino)-4-[3-(trifluoromethyl)phenyl]butanoic acid
MFCD01861067
Boc-(S)-3-Amino-4-(3-trifluoromethyl-phenyl)-butyric acid
Top Suppliers:I want be here





Get all suppliers and price by the below link:

Boc-(S)-3-Amino-4-(3-trifluoromethyl-phenyl)-butyric acid suppliers

Boc-(S)-3-Amino-4-(3-trifluoromethyl-phenyl)-butyric acid price