4-(sec-Butyl)aniline

Modify Date: 2024-01-02 17:03:48

4-(sec-Butyl)aniline Structure
4-(sec-Butyl)aniline structure
Common Name 4-(sec-Butyl)aniline
CAS Number 30273-11-1 Molecular Weight 149.233
Density 0.9±0.1 g/cm3 Boiling Point 244.2±9.0 °C at 760 mmHg
Molecular Formula C10H15N Melting Point N/A
MSDS N/A Flash Point 107.8±0.0 °C

 Names

Name 4-butan-2-ylaniline
Synonym More Synonyms

 Chemical & Physical Properties

Density 0.9±0.1 g/cm3
Boiling Point 244.2±9.0 °C at 760 mmHg
Molecular Formula C10H15N
Molecular Weight 149.233
Flash Point 107.8±0.0 °C
Exact Mass 149.120453
PSA 26.02000
LogP 2.81
Vapour Pressure 0.0±0.5 mmHg at 25°C
Index of Refraction 1.535
Storage condition 2-8°C

 MSDS

4-sec-Butylaniline Revision number: 1
SAFETY DATA SHEET

Section1. BASE INFORMATION
Product name:4-sec-Butylaniline

Revision number:1

Section2. HAZARDS IDENTIFICATION
Classification of the GHS
PHYSICAL HAZARDSNot classified
HEALTH HAZARDS
Category 3
Acute toxicity (Oral)
Acute toxicity (Dermal)Category 3
Category 3
Acute toxicity (Inhalation)
Skin corrosion/irritationCategory 2
Category 2A
Serious eye damage/eye irritation
ENVIRONMENTAL HAZARDSNot classified
GHS label elements
Pictograms or hazard symbols
Signal wordDanger
Hazard statementToxic by inhalation, in contact with skin and if swallowed
Causes skin irritation
Causes serious eye irritation
Precautionary statements
[Prevention]Avoid breathing.
Use only outdoors or in a well-ventilated area.
Do not eat, drink or smoke when using this product.
Wash hands thoroughly after handling.
Wear protective gloves and eye/face protection.
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for
[Response]
breathing. Call a POISON CENTER or doctor/physician.
IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician. Rinse
mouth.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses,
if present and easy to do. Continue rinsing.
If eye irritation persists: Get medical advice/attention.
IF ON SKIN: Gently wash with plenty of soap and water.
If skin irritation occurs: Get medical advice/attention.
Remove/Take off immediately all contaminated clothing.
Wash contaminated clothing before reuse.
Call a POISON CENTER or doctor/physician if you feel unwell.
4-sec-Butylaniline

Section2. HAZARDS IDENTIFICATION
[Storage]Store in a well-ventilated place. Keep container tightly closed.
Store locked up.
[Disposal]Dispose of contents/container through a waste management company authorized by
the local government

Section3. COMPOSITION/INFORMATION ON INGREDIENTS
Substance/mixture:Substance
Component(s):4-sec-Butylaniline
>97.0%(GC)
Percent:
CAS Number:30273-11-1
Chemical Formula:C10H15N

Section4. FIRST AID MEASURES
Inhalation:Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Call a POISON CENTER or doctor/physician.
Remove/Take off immediately all contaminated clothing. Gently wash with plenty of
Skin contact:
soap and water. Call a POISON CENTER or doctor/physician.
Rinse cautiously with water for several minutes. Remove contact lenses, if present
Eye contact:
and easy to do. Continue rinsing. If eye irritation persists: Get medical
advice/attention.
Ingestion:Immediately call a POISON CENTER or doctor/physician. Rinse mouth.
Protection of first-aiders:A rescuer should wear personal protective equipment, such as rubber gloves and air-
tight goggles.

Section5. FIRE-FIGHTING MEASURES
Suitable extinguishingDry chemical, foam, carbon dioxide.
media:
Extinguishing media not to Water (It may scatter and spread fire.)
be used:
Specific hazards:Take care as it may decompose upon combustion or in high temperatures to
generate poisonous fume.
Specific methods:Fire-extinguishing work is done from the windward and the suitable fire-extinguishing
method according to the surrounding situation is used. Uninvolved persons should
evacuate to a safe place. In case of fire in the surroundings: Remove movable
containers if safe to do so.
Special protectiveWhen extinguishing fire, be sure to wear personal protective equipment.
equipment for firefighters:

Section6. ACCIDENTAL RELEASE MEASURES
Personal precautions,Use extra personal protective equipment (self-contained breathing apparatus). Keep
protective equipment and people away from and upwind of spill/leak. Ensure adequate ventilation. Entry to non-
emergency procedures: involved personnel should be controlled around the leakage area by roping off, etc.
Environmental precautions: Prevent product from entering drains.
Methods and materials for Absorb spilled material in a suitable absorbent (e.g. rag, dry sand, earth, saw-dust).
containment and cleaning In case of large amount of spillage, contain a spill by bunding. Adhered or collected
up: material should be promptly disposed of, in accordance with appropriate laws and
regulations.

Section7. HANDLING AND STORAGE
Handling
Technical measures:Handling is performed in a well ventilated place. Wear suitable protective equipment.
Prevent generation of vapor or mist. Wash hands and face thoroughly after handling.
Use a closed system if possible. Use a ventilation, local exhaust if vapor or aerosol
will be generated.
Advice on safe handling:Avoid contact with skin, eyes and clothing.
4-sec-Butylaniline

Section7. HANDLING AND STORAGE
Storage
Keep container tightly closed. Store in a cool, dark and well-ventilated place.
Storage conditions:
Store under inert gas.
Store locked up.
Store away from incompatible materials such as oxidizing agents.
Law is followed.
Packaging material:

Section8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering controls:Install a closed system or local exhaust. Also install safety shower and eye bath.
Personal protective equipment
Respiratory protection: Half or full facepiece respirator, self-contained breathing apparatus(SCBA), supplied
air respirator, etc. Use respirators approved under appropriate government standards
and follow local and national regulations.
Hand protection:Impervious gloves.
Eye protection:Safety goggles. A face-shield, if the situation requires.
Skin and body protection: Impervious protective clothing. Protective boots, if the situation requires.

Section9. PHYSICAL AND CHEMICAL PROPERTIES
Liquid
Physical state (20°C):
Form:clear
Color:Very pale yellow - Yellow
Odor:No data available
pH: No data available
Melting point/freezing point:No data available
Boiling Point/Range:238 °C
Flash Point:107°C
Explosive limits
Lower:No data available
Upper:No data available
Density:0.94
Solubility:No data available

Section10. STABILITY AND REACTIVITY
Stable under proper conditions.
Stability:
Reactivity:No special reactivity has been reported.
Air-sensitive
Conditions to avoid:
Incompartible materials: oxidizing agents
Hazardous Decomposition Carbon monoxide, Carbon dioxide, Nitrogen oxides (NOx)
Products:

Section11. TOXICOLOGICAL INFORMATION
Acute Toxicity:No data available
Skin corrosion/irritation: No data available
Serious eyeNo data available
damage/irritation:
Germ cell mutagenicity: No data available
Carcinogenicity:
IARC =No data available
NTP =No data available
Reproductive toxicity:No data available

Section12. ECOLOGICAL INFORMATION
Ecotoxicity:
Fish:No data available
No data available
Crustacea:
Algae:No data available
4-sec-Butylaniline

Section12. ECOLOGICAL INFORMATION
Persistence / degradability: No data available
BioaccumulativeNo data available
potential(BCF):
Mobillity in soil
log Pow:No data available
No data available
Soil adsorption (Koc):
Henry's LawNo data available
constant(PaM3/mol):

Section13. DISPOSAL CONSIDERATIONS
Recycle to process, if possible. Consult your local regional authorities. You may be able to burn in a chemical
incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local regulations when
disposing of the substance.

Section14. TRANSPORT INFORMATION
Hazards Class:6.1: Toxic substance.
2810
UN-No:
Proper shipping name:Toxic liquid, organic, n.o.s.
III
Packing group:

Section15. REGULATORY INFORMATION
Safe management ordinance of dangerous chemical product (State Council announces on January 26,
2002): Safe use and production, the storage of a dangerous chemical, transport, loading and unloading were
prescribed.


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

Hazard Codes Xi: Irritant;
Risk Phrases R20/21/22
Safety Phrases S26-S36
WGK Germany 3
HS Code 2921420090

 Synthetic Route

~88%

4-(sec-Butyl)aniline Structure

4-(sec-Butyl)aniline

CAS#:30273-11-1

Literature: Hartmann; Batzl European Journal of Medicinal Chemistry, 1992 , vol. 27, # 5 p. 537 - 544

~62%

4-(sec-Butyl)aniline Structure

4-(sec-Butyl)aniline

CAS#:30273-11-1

Literature: Joshi-Pangu, Amruta; Ganesh, Madhu; Biscoe, Mark R. Organic Letters, 2011 , vol. 13, # 5 p. 1218 - 1221

~%

4-(sec-Butyl)aniline Structure

4-(sec-Butyl)aniline

CAS#:30273-11-1

Literature: US3947434 A1, ;

~%

4-(sec-Butyl)aniline Structure

4-(sec-Butyl)aniline

CAS#:30273-11-1

Literature: European Journal of Medicinal Chemistry, , vol. 27, # 5 p. 537 - 544

~%

4-(sec-Butyl)aniline Structure

4-(sec-Butyl)aniline

CAS#:30273-11-1

Literature: Journal of the Chemical Society, , vol. 117, p. 133

~%

4-(sec-Butyl)aniline Structure

4-(sec-Butyl)aniline

CAS#:30273-11-1

Literature: Journal of the Chemical Society, , vol. 117, p. 133

 Customs

HS Code 2921420090
Summary HS:2921420090 aniline derivatives and their salts VAT:17.0% Tax rebate rate:9.0% Supervision conditions:none MFN tariff:6.5% General tariff:30.0%

 Synonyms

(4-sec-butylphenyl)amine
4-sec-butyl-aniline
EINECS 250-108-9
4-(butan-2-yl)aniline
p-sec-Butylaniline
4-s-butyl-aniline
4-(2-Butyl)aniline
MFCD00010223
4-sec-Butylaniline
Benzenamine, 4-(1-methylpropyl)-
4-(1-methylpropyl)aniline
Top Suppliers:I want be here



Get all suppliers and price by the below link:

4-(sec-Butyl)aniline suppliers

4-(sec-Butyl)aniline price