DMTMM
Modify Date: 2024-01-02 10:29:23
DMTMM structure
|
Common Name | DMTMM | ||
|---|---|---|---|---|
| CAS Number | 3945-69-5 | Molecular Weight | 276.720 | |
| Density | N/A | Boiling Point | N/A | |
| Molecular Formula | C10H19ClN4O4 | Melting Point | 110-114 °C | |
| MSDS | Chinese USA | Flash Point | 92.5 °C | |
| Symbol |
GHS05, GHS07 |
Signal Word | Danger | |
| Name | 4-(4,6-Dimethoxy-1,3,5-triazin-2-yl)-4-methyl morpholinium chloride |
|---|---|
| Synonym | More Synonyms |
| Melting Point | 110-114 °C |
|---|---|
| Molecular Formula | C10H19ClN4O4 |
| Molecular Weight | 276.720 |
| Flash Point | 92.5 °C |
| Exact Mass | 276.098907 |
| PSA | 75.59000 |
| Storage condition | -20°C |
|
4-(4,6-Dimethoxy-1,3,5-triazin-2-yl)-4-
Revision number: 5
methylmorpholinium Chloride SAFETY DATA SHEET Section1. IDENTIFICATION Product name:4-(4,6-Dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholinium Chloride
Revision number:5
Section2. HAZARDS IDENTIFICATION GHS classification PHYSICAL HAZARDSNot classified HEALTH HAZARDS Acute toxicity (Oral)Category 4 Category 1B Skin corrosion/irritation Serious eye damage/eye irritationCategory 1 ENVIRONMENTAL HAZARDSNot classified GHS label elements, including precautionary statements Pictograms or hazard symbols Signal wordDanger Harmful if swallowed Hazard statements Causes severe skin burns and eye damage Precautionary statements: [Prevention]Do not breathe dust/fume/gas/mist/vapours/spray. Do not eat, drink or smoke when using this product. Wash hands thoroughly after handling. Wear protective gloves/eye protection/face protection. [Response]IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. Wash contaminated clothing before reuse. Immediately call a POISON CENTER or doctor/physician. [Storage]Store locked up. [Disposal]Dispose of contents/container through a waste management company authorized by the local government. 4-(4,6-Dimethoxy-1,3,5-triazin-2-yl)-4- methylmorpholinium Chloride Section3. COMPOSITION/INFORMATION ON INGREDIENTS Substance/mixture:Substance Components:4-(4,6-Dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholinium Chloride Percent:>98.0%(T) CAS Number:3945-69-5 Synonyms:DMTMM Chemical Formula:C10H17ClN4O3 Section4. FIRST AID MEASURES Inhalation:Remove victim to fresh air and keep at rest in a position comfortable for breathing. Immediately call a POISON CENTER or doctor/physician. Skin contact:Remove/Take off immediately all contaminated clothing. Gently wash with plenty of soap and water. Immediately call a POISON CENTER or doctor/physician. Eye contact:Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.Immediately call a POISON CENTER or doctor/physician. Ingestion:Immediately call a POISON CENTER or doctor/physician. Rinse mouth. Do NOT induce vomiting. A rescuer should wear personal protective equipment, such as rubber gloves and air- Protection of first-aiders: tight goggles. Section5. FIRE-FIGHTING MEASURES Suitable extinguishingDry chemical, foam, water spray, carbon dioxide. media: Specific hazards arising Take care as it may decompose upon combustion or in high temperatures to from the chemical:generate poisonous fume. Precautions for firefighters: Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place. In case of fire in the surroundings: Remove movable containers if safe to do so. Special protectiveWhen extinguishing fire, be sure to wear personal protective equipment. equipment for firefighters: Section6. ACCIDENTAL RELEASE MEASURES Personal precautions,Use extra personal protective equipment (P3 filter respirator for toxic particles). Keep protective equipment and people away from and upwind of spill/leak. Entry to non-involved personnel should emergency procedures: be controlled around the leakage area by roping off, etc. Environmental precautions: Prevent product from entering drains. Methods and materials for Sweep dust to collect it into an airtight container, taking care not to disperse it. containment and cleaning Adhered or collected material should be promptly disposed of, in accordance with up: appropriate laws and regulations. Section7. HANDLING AND STORAGE Precautions for safe handling Technical measures:Handling is performed in a well ventilated place. Wear suitable protective equipment. Prevent dispersion of dust. Wash hands and face thoroughly after handling. Use a closed system if possible. Use a local exhaust if dust or aerosol will be generated. Advice on safe handling: Avoid contact with skin, eyes and clothing. Conditions for safe storage, including any incompatibilities Storage conditions:Keep container tightly closed. Store in a freezer. Store under inert gas. Protect from moisture. Store locked up. Store away from incompatible materials such as oxidizing agents. 4-(4,6-Dimethoxy-1,3,5-triazin-2-yl)-4- methylmorpholinium Chloride Section7. HANDLING AND STORAGE Heat-sensitive, Hygroscopic Packaging material:Comply with laws. Section8. EXPOSURE CONTROLS / PERSONAL PROTECTION Engineering controls:Install a closed system or local exhaust. Also install safety shower and eye bath. Personal protective equipment Respiratory protection: Dust respirator, self-contained breathing apparatus(SCBA), supplied air respirator, etc. Use respirators approved under appropriate government standards and follow local and national regulations. Hand protection:Impervious gloves. Eye protection:Safety goggles. A face-shield, if the situation requires. Skin and body protection: Impervious protective clothing. Protective boots, if the situation requires. Section9. PHYSICAL AND CHEMICAL PROPERTIES Solid Physical state (20°C): Form:Crystal- Powder Colour:White - Very pale yellow Odour:No data available pH: No data available Melting point/freezing point:No data available Boiling point/range:No data available No data available Flash point: Flammability or explosive limits: Lower:No data available No data available Upper: Relative density:No data available Solubility(ies): [Water]No data available [Other solvents] Soluble:Methanol Section10. STABILITY AND REACTIVITY Stable under proper conditions. Chemical stability: Possibility of hazardous No special reactivity has been reported. reactions: Incompatible materials: Oxidizing agents, Bases Hazardous decomposition Carbon monoxide, Carbon dioxide, Nitrogen oxides (NOx), Hydrogen chloride products: Section11. TOXICOLOGICAL INFORMATION Acute Toxicity:No data available Skin corrosion/irritation: No data available Serious eyeNo data available damage/irritation: Germ cell mutagenicity: No data available Carcinogenicity: IARC =No data available NTP =No data available Reproductive toxicity:No data available Section12. ECOLOGICAL INFORMATION Ecotoxicity: Fish:No data available Crustacea:No data available Algae:No data available 4-(4,6-Dimethoxy-1,3,5-triazin-2-yl)-4- methylmorpholinium Chloride Section12. ECOLOGICAL INFORMATION Persistence / degradability: No data available BioaccumulativeNo data available potential(BCF): Mobility in soil Log Pow:No data available No data available Soil adsorption (Koc): Henry's LawNo data available constant(PaM3/mol): Section13. DISPOSAL CONSIDERATIONS Recycle to process, if possible. Consult your local regional authorities. You may be able to dissolve or mix material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local regulations when disposing of the substance. Section14. TRANSPORT INFORMATION Hazards Class:8: Corrosive. 3261 UN-No: Proper shipping name:Corrosive solid, acidic, organic, n.o.s. II Packing group: Section15. REGULATORY INFORMATION Safe management ordinance of dangerous chemical product (State Council announces on January 26, 2002 and revised on February 16,2011): Safe use and production, the storage of a dangerous chemical, transport, loading and unloading were prescribed. SECTION 16 - ADDITIONAL INFORMATION N/A |
| Symbol |
GHS05, GHS07 |
|---|---|
| Signal Word | Danger |
| Hazard Statements | H302-H314 |
| Precautionary Statements | P280-P305 + P351 + P338-P310 |
| Personal Protective Equipment | Eyeshields;Faceshields;full-face particle respirator type N100 (US);Gloves;respirator cartridge type N100 (US);type P1 (EN143) respirator filter;type P3 (EN 143) respirator cartridges |
| Hazard Codes | C:Corrosive; |
| Risk Phrases | R20/21/22;R34;R40 |
| Safety Phrases | S26-S36/37/39-S45 |
| RIDADR | UN 3261 8/PG 2 |
| WGK Germany | 3 |
| Packaging Group | III |
| Hazard Class | 8 |
| HS Code | 2934999090 |
|
~98%
DMTMM CAS#:3945-69-5 |
| Literature: Hirano, Naoki; Saijyo, Masako Patent: US2003/153785 A1, 2003 ; |
|
~99%
DMTMM CAS#:3945-69-5 |
| Literature: Kolesinska, Beata; Kasperowicz, Katarzyna; Sochacki, Marek; Mazur, Adam; Jankowski, Stefan; Kaminski, Zbigniew J. Tetrahedron Letters, 2010 , vol. 51, # 1 p. 20 - 22 |
|
~%
Detail
|
| Literature: Kunishima, Munetaka; Ujigawa, Takae; Nagaoka, Yoshie; Kawachi, Chiho; Hioki, Kazuhito; Shiro, Motoo Chemistry - A European Journal, 2012 , vol. 18, # 49 p. 15856 - 15867 |
CAS#:103-25-3
CAS#:51987-73-6
CAS#:91889-76-8| HS Code | 2934999090 |
|---|---|
| Summary | 2934999090. other heterocyclic compounds. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:6.5%. General tariff:20.0% |
|
Monoclonal antibody-functionalized multilayered particles: targeting cancer cells in the presence of protein coronas.
ACS Nano 9(3) , 2876-85, (2015) Engineered particles adsorb biomolecules (e.g., proteins) when introduced in a biological medium to form a layer called a "corona". Coronas, in particular the protein corona, play an important role in... |
|
|
Relative quantification of amine-containing metabolites using isobaric N,N-dimethyl leucine (DiLeu) reagents via LC-ESI-MS/MS and CE-ESI-MS/MS.
Analyst 140(2) , 467-75, (2014) Tandem mass spectrometry (MS/MS)-based relative quantification by isobaric labeling is a useful technique to compare different metabolic expression levels in biological systems. For the first time, we... |
|
|
Peptide dimethylation: fragmentation control via distancing the dimethylamino group.
J. Am. Soc. Mass Spectrom. 25(10) , 1694-704, (2014) Direct reductive methylation of peptides is a common method for quantitative proteomics. It is an active derivatization technique; with participation of the dimethylamino group, the derivatized peptid... |
| 4-(4,6-Dimethoxy-[1,3,5]triazin-2-yl)-4-methylmorpholin-4-ium chloride |
| DMTMM |
| T6N CN ENJ BO1 DO1 F- AT6K DOTJ A1 &&Cl- |
| 4-(4,6-Dimethoxy[1,3,5]triazin-2-yl)-4-methylmorpholinium chloride |
| 4-(4,6-Dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholin-4-ium |
| 4-(4,6-Dimethoxy[1.3.5]triazin-2-yl)-4-methylmorpholinium chloride |
| KUNISHIMA COUPLING REAGENT |
| MFCD03093287 |
| 4-(4,6-Dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholinium Chloride |
| 4-(4,6-Dimethoxy-1,3,5-triazine-2-yl)-4-methyl morpholinium chloride |
| 4-(4,6-Dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholin-4-ium chloride |
| DMTMM Cl |
| 4-4-methylmorpholinium chloride |
| EINECS 447-230-1 |
| Morpholinium, 4-(4,6-dimethoxy-1,3,5-triazin-2-yl)-4-methyl-, chloride (1:1) |
| 4-(4,6-DIMETHOXY-1,3,5-TRIAZIN-2-YL)-4-METHYLMORPHOLINIUM CH LORIDE |