3-Hexanol, 2,2-dimethyl- structure
|
Common Name | 3-Hexanol, 2,2-dimethyl- | ||
---|---|---|---|---|
CAS Number | 4209-90-9 | Molecular Weight | 130.22800 | |
Density | 0,82 g/cm3 | Boiling Point | 156 °C | |
Molecular Formula | C8H18O | Melting Point | N/A | |
MSDS | N/A | Flash Point | 56.6ºC |
Name | 2,2-dimethyl-3-hexanol |
---|---|
Synonym | More Synonyms |
Density | 0,82 g/cm3 |
---|---|
Boiling Point | 156 °C |
Molecular Formula | C8H18O |
Molecular Weight | 130.22800 |
Flash Point | 56.6ºC |
Exact Mass | 130.13600 |
PSA | 20.23000 |
LogP | 2.19350 |
Index of Refraction | 1.425 |
2,2-Dimethyl-3-hexanol
Revision number: 5
SAFETY DATA SHEET Section1. IDENTIFICATION Product name:2,2-Dimethyl-3-hexanol Revision number:5 Section2. HAZARDS IDENTIFICATION GHS classification PHYSICAL HAZARDS Category 3 Flammable liquids HEALTH HAZARDSNot classified Not classified ENVIRONMENTAL HAZARDS GHS label elements, including precautionary statements Pictograms or hazard symbols Signal wordWarning Hazard statementsFlammable liquid and vapour Precautionary statements: [Prevention]Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Keep container tightly closed. Use explosion-proof electrical/ventilating/lighting equipment. Take precautionary measures against ignition by the static discharge and the spark. Wear protective gloves/eye protection/face protection. [Response]IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. [Storage]Store in a well-ventilated place. Keep cool. Dispose of contents/container through a waste management company authorized by [Disposal] the local government. Section3. COMPOSITION/INFORMATION ON INGREDIENTS Substance/mixture:Substance Components:2,2-Dimethyl-3-hexanol Percent:>98.0%(GC) CAS Number:4209-90-9 Chemical Formula:C8H18O Section4. FIRST AID MEASURES Inhalation:Remove victim to fresh air and keep at rest in a position comfortable for breathing. Get medical advice/attention if you feel unwell. 2,2-Dimethyl-3-hexanol Section4. FIRST AID MEASURES Skin contact:Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. If skin irritation or rash occurs: Get medical advice/attention. Eye contact:Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. Ingestion:Get medical advice/attention if you feel unwell. Rinse mouth. A rescuer should wear personal protective equipment, such as rubber gloves and air- Protection of first-aiders: tight goggles. Section5. FIRE-FIGHTING MEASURES Suitable extinguishingDry chemical, foam, carbon dioxide. media: Unsuitable extinguishing Water (It may scatter and spread fire.) media: Precautions for firefighters: Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place. In case of fire in the surroundings: Keep containers cool by spraying with water. Eliminate all ignition sources if safe to do so. Special protectiveWhen extinguishing fire, be sure to wear personal protective equipment. equipment for firefighters: Section6. ACCIDENTAL RELEASE MEASURES Personal precautions,Use personal protective equipment. Keep people away from and upwind of spill/leak. protective equipment and Ensure adequate ventilation. Entry to non-involved personnel should be controlled emergency procedures: around the leakage area by roping off, etc. Environmental precautions: Prevent product from entering drains. Methods and materials for Absorb spilled material in dry sand or inert absorbent before recovering it into an containment and cleaning airtight container. In case of large amount of spillage, contain a spill by bunding. up: Adhered or collected material should be promptly disposed of, in accordance with appropriate laws and regulations. Prevention of secondary Remove all sources of ignition. Fire-extinguishing devices should be prepared in hazards:case of a fire. Use spark-proof tools and explosion-proof equipment. Section7. HANDLING AND STORAGE Precautions for safe handling Technical measures:Handling is performed in a well ventilated place. Wear suitable protective equipment. Prevent generation of vapour or mist. Keep away from heat/sparks/open flame/hot surfaces. -No smoking. Take measures to prevent the build up of electrostatic charge. Use explosion-proof equipment. Wash hands and face thoroughly after handling. Use a closed system if possible. Use a ventilation, local exhaust if vapour or aerosol will be generated. Advice on safe handling: Avoid contact with skin, eyes and clothing. Conditions for safe storage, including any incompatibilities Storage conditions:Keep container tightly closed. Store in a cool, dark and well-ventilated place. Store away from incompatible materials such as oxidizing agents. Packaging material:Comply with laws. Section8. EXPOSURE CONTROLS / PERSONAL PROTECTION Engineering controls:Install a closed system or local exhaust. Also install safety shower and eye bath. Personal protective equipment Respiratory protection: Vapor respirator. Follow local and national regulations. Hand protection:Protective gloves. Safety glasses. A face-shield, if the situation requires. Eye protection: Skin and body protection: Protective clothing. Protective boots, if the situation requires. 2,2-Dimethyl-3-hexanol Section9. PHYSICAL AND CHEMICAL PROPERTIES Physical state (20°C):Liquid Clear Form: Colour:Colorless - Almost colorless No data available Odour: pH: No data available Melting point/freezing point:No data available Boiling point/range:156°C No data available Flash point: Flammability or explosive limits: Lower:No data available No data available Upper: Relative density:0.83 Solubility(ies): [Water]No data available No data available [Other solvents] Section10. STABILITY AND REACTIVITY Chemical stability:Stable under proper conditions. Possibility of hazardous No special reactivity has been reported. reactions: Conditions to avoid:Spark, Open flame, Static discharge Incompatible materials: Oxidizing agents Hazardous decomposition Carbon monoxide, Carbon dioxide products: Section11. TOXICOLOGICAL INFORMATION Acute Toxicity:No data available Skin corrosion/irritation: No data available Serious eyeNo data available damage/irritation: Germ cell mutagenicity: No data available Carcinogenicity: IARC =No data available No data available NTP = Reproductive toxicity:No data available Section12. ECOLOGICAL INFORMATION Ecotoxicity: Fish:No data available Crustacea:No data available Algae:No data available Persistence / degradability: No data available BioaccumulativeNo data available potential(BCF): Mobility in soil Log Pow:No data available Soil adsorption (Koc):No data available Henry's LawNo data available constant(PaM3/mol): Section13. DISPOSAL CONSIDERATIONS Recycle to process, if possible. Consult your local regional authorities. You may be able to burn in a chemical incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local regulations when disposing of the substance. 2,2-Dimethyl-3-hexanol Section14. TRANSPORT INFORMATION Hazards Class:3: Flammable liquid. UN-No:1987 Proper shipping name:Alcohols, n.o.s. Packing group:III Section15. REGULATORY INFORMATION Safe management ordinance of dangerous chemical product (State Council announces on January 26, 2002 and revised on February 16,2011): Safe use and production, the storage of a dangerous chemical, transport, loading and unloading were prescribed. SECTION 16 - ADDITIONAL INFORMATION N/A |
Risk Phrases | 36/37/38 |
---|---|
Safety Phrases | S26-S36/37/39 |
HS Code | 2905199090 |
HS Code | 2905199090 |
---|---|
Summary | 2905199090. saturated monohydric alcohols. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:5.5%. General tariff:30.0% |
EINECS 224-135-1 |
2,2-dimethylhexan-3-ol |
MFCD00021929 |
2,2-DiMethyl-3-hexanol |