Sodium 3-pyridinolate structure
|
Common Name | Sodium 3-pyridinolate | ||
|---|---|---|---|---|
| CAS Number | 52536-09-1 | Molecular Weight | 117.081 | |
| Density | N/A | Boiling Point | 318.9ºC at 760 mmHg | |
| Molecular Formula | C5H4NNaO | Melting Point | 300ºC | |
| MSDS | N/A | Flash Point | 146.6ºC | |
This table lists Chinese names, IUPAC names and various aliases of this chemical substance.
| Name | 3-Hydroxypyridine sodium salt |
|---|---|
| Synonym | More Synonyms |
This table shows physicochemical parameters including melting point, boiling point, density, solubility and optical rotation. Missing data is marked as N/A.
| Boiling Point | 318.9ºC at 760 mmHg |
|---|---|
| Melting Point | 300ºC |
| Molecular Formula | C5H4NNaO |
| Molecular Weight | 117.081 |
| Flash Point | 146.6ºC |
| Exact Mass | 117.019058 |
| PSA | 35.95000 |
| LogP | 1.22540 |
| Appearance of Characters | solid |
| InChIKey | WHYQZPOBOBSAIS-UHFFFAOYSA-M |
| SMILES | [Na+].[O-]c1cccnc1 |
This table provides MSDS information including hazard classification, first‑aid, fire‑fighting, spill handling, operation and storage instructions.
Synonym:Sodium pyridin-3-olat Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
Risk Phrases: 36/37/38 Section 3 - HAZARDS IDENTIFICATION EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.Hygroscopic (absorbs moisture from the air).The toxicological properties of this material have not been fully investigated. Potential Health Effects Eye: Causes eye irritation. May cause chemical conjunctivitis. Skin: Causes skin irritation. Ingestion: May cause gastrointestinal irritation with nausea, vomiting and diarrhea. The toxicological properties of this substance have not been fully investigated. Inhalation: Causes respiratory tract irritation. The toxicological properties of this substance have not been fully investigated. Can produce delayed pulmonary edema. Chronic: Effects may be delayed. Section 4 - FIRST AID MEASURES Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid. Skin: Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Ingestion: Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water. Inhalation: Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid. Do NOT use mouth-to-mouth resuscitation. Notes to Physician: Treat symptomatically and supportively. Section 5 - FIRE FIGHTING MEASURES General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Extinguishing Media: Do NOT get water inside containers. In case of fire, use carbon dioxide, dry chemical powder or appropriate foam. Section 6 - ACCIDENTAL RELEASE MEASURES General Information: Use proper personal protective equipment as indicated in Section 8. Spills/Leaks: Sweep up, then place into a suitable container for disposal. Avoid generating dusty conditions. Provide ventilation. Section 7 - HANDLING and STORAGE Handling: Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Keep from contact with moist air and steam. Storage: Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Store protected from moisture. Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION Engineering Controls: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low. Exposure Limits CAS# 52536-09-1: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure. Respirators: A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use. Section 9 - PHYSICAL AND CHEMICAL PROPERTIES Physical State: Powder Color: beige Odor: None reported. pH: Not available. Vapor Pressure: Not available. Viscosity: Not available. Boiling Point: Not available. Freezing/Melting Point: > 300 deg C Autoignition Temperature: Not applicable. Flash Point: Not applicable. Explosion Limits, lower: Not available. Explosion Limits, upper: Not available. Decomposition Temperature: Not available. Solubility in water: Not available. Specific Gravity/Density: Not available. Molecular Formula: C5H4NONa Molecular Weight: 117.08 Section 10 - STABILITY AND REACTIVITY Chemical Stability: Stable. However, may decompose if exposed to moist air or water. Conditions to Avoid: Incompatible materials, dust generation, strong oxidants, exposure to moist air or water. Incompatibilities with Other Materials: Moisture, strong oxidizing agents. Hazardous Decomposition Products: Nitrogen oxides, carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, nitrogen. Hazardous Polymerization: Has not been reported. Section 11 - TOXICOLOGICAL INFORMATION RTECS#: CAS# 52536-09-1 unlisted. LD50/LC50: Not available. Carcinogenicity: 3-Hydroxypyridine Sodium Salt - Not listed by ACGIH, IARC, or NTP. Section 12 - ECOLOGICAL INFORMATION Section 13 - DISPOSAL CONSIDERATIONS Dispose of in a manner consistent with federal, state, and local regulations. Section 14 - TRANSPORT INFORMATION IATA Not regulated as a hazardous material. IMO Not regulated as a hazardous material. RID/ADR Not regulated as a hazardous material. Section 15 - REGULATORY INFORMATION European/International Regulations European Labeling in Accordance with EC Directives Hazard Symbols: XI Risk Phrases: R 36/37/38 Irritating to eyes, respiratory system and skin. Safety Phrases: S 24/25 Avoid contact with skin and eyes. WGK (Water Danger/Protection) CAS# 52536-09-1: No information available. Canada None of the chemicals in this product are listed on the DSL/NDSL list. CAS# 52536-09-1 is not listed on Canada's Ingredient Disclosure List. US FEDERAL TSCA CAS# 52536-09-1 is not listed on the TSCA inventory. It is for research and development use only. SECTION 16 - ADDITIONAL INFORMATION N/A |
This table covers safety warnings, protective measures, incompatible substances and disposal guidelines for this compound.
| Hazard Codes | Xi: Irritant; |
|---|---|
| Risk Phrases | R36/37/38 |
| Safety Phrases | S26-S37/39 |
This table lists upstream starting materials and downstream derivative products related to this chemical.
| Precursor 1 | |
|---|---|
| DownStream 3 | |
This table collects all English aliases, systematic names and CAS‑related synonyms of the compound.
| Sodium 3-pyridinolate |
| 3-Hydroxypyridine so |
| EINECS 257-995-1 |
| sodium salt of 3-pyridinol |
| 3-pyridylphenolate sodium salt |
| MFCD00078091 |
| 3-Pyridinol, sodium salt (1:1) |
| sodium pyridin-3-olate |
| 3-Hydroxypyridine sodium salt |
| Sodium pyridine-3-olate |
| sodium salt of 3-hydroxypyridine |
This section contains frequently‑asked‑questions about this compound, including basic parameters, properties, storage conditions and corresponding answers.
| Q: What is the CAS number of 3-Hydroxypyridine sodium salt? |
| A: CAS number of 3-Hydroxypyridine sodium salt is 52536-09-1. |
| Q: What is the polar surface area (PSA) of 3-Hydroxypyridine sodium salt? |
| A: Polar surface area (PSA) of 3-Hydroxypyridine sodium salt is 35.95000. |
| Q: What is the boiling point of 3-Hydroxypyridine sodium salt? |
| A: Boiling point of 3-Hydroxypyridine sodium salt is 318.9ºC at 760 mmHg. |
| Q: What is the melting point of 3-Hydroxypyridine sodium salt? |
| A: Melting point of 3-Hydroxypyridine sodium salt is 300ºC. |
| Q: What is the English name of 3-Hydroxypyridine sodium salt? |
| A: The English name of 3-Hydroxypyridine sodium salt is 3-Hydroxypyridine sodium salt. |
| Q: What are the upstream materials of 3-Hydroxypyridine sodium salt? |
| A: Related upstream materials(CAS) of 3-Hydroxypyridine sodium salt: 109-00-2. |
| Q: What is the InChIKey of 3-Hydroxypyridine sodium salt? |
| A: InChIKey of 3-Hydroxypyridine sodium salt is WHYQZPOBOBSAIS-UHFFFAOYSA-M. |
| Q: What is the SMILES notation of 3-Hydroxypyridine sodium salt? |
| A: SMILES notation of 3-Hydroxypyridine sodium salt is [Na+].[O-]c1cccnc1. |
| Q: What is the safety information for 3-Hydroxypyridine sodium salt? |
| A: Safety information for 3-Hydroxypyridine sodium salt: S26-S37/39. |
| Q: What is the molecular weight of 3-Hydroxypyridine sodium salt? |
| A: Molecular weight of 3-Hydroxypyridine sodium salt is 117.081. |
This table lists manufacturers and suppliers of this compound, including vendor names and product supply reference information.
| Dayang Chem (Hangzhou) Co., Ltd. |