MP265

Modify Date: 2024-01-14 12:16:34

MP265 Structure
MP265 structure
Common Name MP265
CAS Number 544-47-8 Molecular Weight 237.14900
Density 1.4757 (rough estimate) Boiling Point 315.9ºC at 760mmHg
Molecular Formula C8H10Cl2N2S Melting Point 205-208ºC
MSDS N/A Flash Point 144.9ºC

 Use of MP265


MP265 is an inhibitor of MreB polymerization.

 Names

Name s-(4-chlorobenzyl)isothiouronium chloride
Synonym More Synonyms

 Chemical & Physical Properties

Density 1.4757 (rough estimate)
Boiling Point 315.9ºC at 760mmHg
Melting Point 205-208ºC
Molecular Formula C8H10Cl2N2S
Molecular Weight 237.14900
Flash Point 144.9ºC
Exact Mass 235.99400
PSA 75.17000
LogP 4.06870
Index of Refraction 1.6300 (estimate)

 MSDS

Name: S-(4-Chlorobenzyl)-Thiuronium Chloride 99+% Material Safety Data Sheet
Synonym: P-Chlorobenzylpseudothiuronium Chloride
CAS: 544-47-8
Section 1 - Chemical Product MSDS Name:S-(4-Chlorobenzyl)-Thiuronium Chloride 99+% Material Safety Data Sheet
Synonym:P-Chlorobenzylpseudothiuronium Chloride

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
544-47-8 Carbamimidothioic Acid, (4-Chloropheny 99+ 208-871-0
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully investigated.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated.
Chronic:
No information found.

Section 4 - FIRST AID MEASURES
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry chemical, carbon dioxide, or appropriate foam.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, observing precautions in the Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 544-47-8: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Solid
Color: white
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 205 - 207 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C8H10Cl2N2S
Molecular Weight: 237.15

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, oxides of sulfur, irritating and toxic fumes and gases, carbon dioxide, hydrogen sulfide.
Hazardous Polymerization: Has not been reported

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 544-47-8: UM0950000 LD50/LC50:
Not available.
Carcinogenicity:
Carbamimidothioic Acid, (4-Chlorophenyl)methylester, Monohyd - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

Section 12 - ECOLOGICAL INFORMATION


Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 544-47-8: No information available.
Canada
CAS# 544-47-8 is listed on Canada's NDSL List.
CAS# 544-47-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 544-47-8 is listed on the TSCA inventory.


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Toxicological Information

CHEMICAL IDENTIFICATION

RTECS NUMBER :
UM0950000
CHEMICAL NAME :
Pseudourea, 2-(p-chlorobenzyl)-2-thio-, monohydrochloride
CAS REGISTRY NUMBER :
544-47-8
LAST UPDATED :
199701
DATA ITEMS CITED :
2
MOLECULAR FORMULA :
C8-H9-Cl-N2-S.Cl-H

HEALTH HAZARD DATA

ACUTE TOXICITY DATA

TYPE OF TEST :
LDLo - Lowest published lethal dose
ROUTE OF EXPOSURE :
Oral
SPECIES OBSERVED :
Rodent - mouse
DOSE/DURATION :
1600 mg/kg
TOXIC EFFECTS :
Details of toxic effects not reported other than lethal dose value
REFERENCE :
AECTCV Archives of Environmental Contamination and Toxicology. (Springer-Verlag New York, Inc., Service Center, 44 Hartz Way, Secaucus, NJ 070944) V.1- 1973- Volume(issue)/page/year: 14,111,1985

 Safety Information

Hazard Codes Xi
Safety Phrases S24/25
RIDADR UM0950000
RTECS UM0950000
HS Code 2930909090

 Synthetic Route

~86%

MP265 Structure

MP265

CAS#:544-47-8

Literature: Wyrick; Hall; Dubey Journal of Pharmaceutical Sciences, 1984 , vol. 73, # 3 p. 374 - 377

~%

MP265 Structure

MP265

CAS#:544-47-8

Literature: Journal of the American Chemical Society, , vol. 109, # 24 p. 7472 - 7477

~%

MP265 Structure

MP265

CAS#:544-47-8

Literature: Journal of Pharmaceutical Sciences, , vol. 73, # 3 p. 374 - 377

 Customs

HS Code 2930909090
Summary 2930909090. other organo-sulphur compounds. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:6.5%. General tariff:30.0%

 Synonyms

4-CHLOROBENZYL CARBAMIMIDOTHIOATE HCL
S-(4-CHLOROBENZYL)-THIURONIUM CHLORIDE
2-(p-chlorobenzyl)-2-thio-pseudouremonohydrochloride
2-(p-chlorobenzyl)isothiouronium chloride
EINECS 208-871-0
MFCD00012584
S-(4-chloro-benzyl)-isothiourea,hydrochloride
4-chlorobenzyl carbaMiMidothioate hydrochloride
S-p-chlorobenzylisothiouronium chloride
p-chlorobenzylpseudothiuroniumchloride
2-(4-chlorobenzyl)-2-thiopseudoureahydrochloride
S-(4-CHLORBENZYL)-ISOTHIOHARNSTOFF HYDRO
S-(4-chloro)benzylisothiouronium chloride
S-(4-Chlor-benzyl)-isothioharnstoff,Hydrochlorid
Top Suppliers:I want be here
  • DC Chemicals Limited
  • China
  • Product Name: MP265
  • Price: $Inquiry/100mg $Inquiry/250mg $Inquiry/500mg
  • Purity: 98.0%
  • Stocking Period: 3 Day
  • Contact: Tony Cao


Get all suppliers and price by the below link:

MP265 suppliers

MP265 price

Hot Compounds More...
Dichloromethane
CAS#:75-09-2
Polyacrylic acid
CAS#:9003-01-4
sodium carbonate
CAS#:497-19-8
Silicon dioxide
CAS#:7631-86-9
Triethanolamine
CAS#:102-71-6
Demeton
CAS#:126-75-0
Water
CAS#:7732-18-5
4-(4-Piperidinyl)morpholine dihydrochloride
CAS#:53617-35-9
Diclofenac sodium
CAS#:15307-79-6
Budesonide
CAS#:51372-29-3