1-Chloro-4-methoxybenzene structure
|
Common Name | 1-Chloro-4-methoxybenzene | ||
---|---|---|---|---|
CAS Number | 623-12-1 | Molecular Weight | 142.583 | |
Density | 1.1±0.1 g/cm3 | Boiling Point | 184.4±13.0 °C at 760 mmHg | |
Molecular Formula | C7H7ClO | Melting Point | −18 °C(lit.) | |
MSDS | Chinese USA | Flash Point | 78.3±0.0 °C |
Name | 4-Chloroanisole |
---|---|
Synonym | More Synonyms |
Density | 1.1±0.1 g/cm3 |
---|---|
Boiling Point | 184.4±13.0 °C at 760 mmHg |
Melting Point | −18 °C(lit.) |
Molecular Formula | C7H7ClO |
Molecular Weight | 142.583 |
Flash Point | 78.3±0.0 °C |
Exact Mass | 142.018539 |
PSA | 9.23000 |
LogP | 2.82 |
Vapour Pressure | 1.0±0.3 mmHg at 25°C |
Index of Refraction | 1.515 |
Storage condition | 2-8°C |
Stability | Stable. Combustible. Incompatible with strong oxidizing agents. |
Water Solubility | immiscible |
Synonym:1-Chloro-4-Methoxybenzene Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
Risk Phrases: None Listed. Section 3 - HAZARDS IDENTIFICATION EMERGENCY OVERVIEW
Not available. Potential Health Effects Eye: May cause eye irritation. May cause chemical conjunctivitis and corneal damage. Skin: May cause irritation and dermatitis. May cause cyanosis of the extremities. Ingestion: May cause gastrointestinal irritation with nausea, vomiting and diarrhea. May cause central nervous system depression. Inhalation: May cause respiratory tract irritation. Aspiration may lead to pulmonary edema. Inhalation at high concentrations may cause CNS depression and asphixiation. Chronic: Effects may be delayed. Section 4 - FIRST AID MEASURES Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid. Skin: Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Ingestion: Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water. Inhalation: Remove from exposure and move to fresh air immediately. If breathing is difficult, give oxygen. Get medical aid. Do NOT use mouth-to-mouth resuscitation. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask. Notes to Physician: Section 5 - FIRE FIGHTING MEASURES General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Combustible liquid. Vapors may be heavier than air. They can spread along the ground and collect in low or confined areas. Containers may explode when heated. Runoff from fire control or dilution water may cause pollution. Extinguishing Media: Use water spray to cool fire-exposed containers. Use agent most appropriate to extinguish fire. Use water spray, dry chemical, carbon dioxide, or appropriate foam. Section 6 - ACCIDENTAL RELEASE MEASURES General Information: Use proper personal protective equipment as indicated in Section 8. Spills/Leaks: Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, observing precautions in the Protective Equipment section. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation. Section 7 - HANDLING and STORAGE Handling: Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Keep away from heat, sparks and flame. Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames. Storage: Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION Engineering Controls: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low. Exposure Limits CAS# 623-12-1: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure. Respirators: Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. Section 9 - PHYSICAL AND CHEMICAL PROPERTIES Physical State: Liquid Color: light yellow or yellow Odor: None reported. pH: Not available. Vapor Pressure: Not available. Viscosity: Not available. Boiling Point: 198 - 202 deg C @ 760.00mmHg Freezing/Melting Point: 18 deg C Autoignition Temperature: Not applicable. Flash Point: 78 deg C ( 172.40 deg F) Explosion Limits, lower: Not available. Explosion Limits, upper: Not available. Decomposition Temperature: Solubility in water: immiscible Specific Gravity/Density: 1.1640g/cm3 Molecular Formula: C7H7ClO Molecular Weight: 142.58 Section 10 - STABILITY AND REACTIVITY Chemical Stability: Stable under normal temperatures and pressures. Conditions to Avoid: Incompatible materials, ignition sources, excess heat, strong oxidants. Incompatibilities with Other Materials: Oxidizing agents. Hazardous Decomposition Products: Hydrogen chloride, carbon monoxide, irritating and toxic fumes and gases, carbon dioxide. Hazardous Polymerization: Has not been reported. Section 11 - TOXICOLOGICAL INFORMATION RTECS#: CAS# 623-12-1 unlisted. LD50/LC50: Not available. Carcinogenicity: 4-Chloroanisole - Not listed by ACGIH, IARC, or NTP. Section 12 - ECOLOGICAL INFORMATION Section 13 - DISPOSAL CONSIDERATIONS Dispose of in a manner consistent with federal, state, and local regulations. Section 14 - TRANSPORT INFORMATION IATA Not regulated as a hazardous material. IMO Not regulated as a hazardous material. RID/ADR Not regulated as a hazardous material. Section 15 - REGULATORY INFORMATION European/International Regulations European Labeling in Accordance with EC Directives Hazard Symbols: Not available. Risk Phrases: Safety Phrases: S 24/25 Avoid contact with skin and eyes. S 28A After contact with skin, wash immediately with plenty of water. S 37 Wear suitable gloves. S 45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). WGK (Water Danger/Protection) CAS# 623-12-1: No information available. Canada CAS# 623-12-1 is listed on Canada's NDSL List. CAS# 623-12-1 is not listed on Canada's Ingredient Disclosure List. US FEDERAL TSCA CAS# 623-12-1 is listed on the TSCA inventory. SECTION 16 - ADDITIONAL INFORMATION N/A |
Personal Protective Equipment | Eyeshields;full-face respirator (US);Gloves;multi-purpose combination respirator cartridge (US);type ABEK (EN14387) respirator filter |
---|---|
Hazard Codes | Xn: Harmful; |
Safety Phrases | S23-S24/25 |
RIDADR | UN 2810 |
WGK Germany | 3 |
HS Code | 29093090 |
Precursor 10 | |
---|---|
DownStream 10 | |
HS Code | 2909309090 |
---|---|
Summary | 2909309090 other aromatic ethers and their halogenated, sulphonated, nitrated or nitrosated derivatives VAT:17.0% Tax rebate rate:9.0% Supervision conditions:none MFN tariff:5.5% General tariff:30.0% |
Glucose as a clean and renewable reductant in the Pd-nanoparticle-catalyzed reductive homocoupling of bromo- and chloroarenes in water.
J. Org. Chem. 75(11) , 3908-11, (2010) An efficient and highly sustainable Ullmann-type homocoupling of bromo- and chloroarenes, including the more challenging electron-rich chloroarenes (e.g., 4-chloroanisole), catalyzed by in situ genera... |
|
Single electron transfer mechanism of oxidative dechlorination of 4-chloroanisole on copper (II)-smectite. Govindaraj N, et al.
Environ. Sci. Technol. 21(11) , 1119-23, (1987)
|
|
Laser spectroscopic study of the nucleophilic photosubstitution of 4-chloroanisole and 4-fluoroanisole in aqueous solutions. Lemmetyinen H, et al.
J. Photochem. 30(3) , 315-38, (1985)
|
4-Chloroanisole |
MFCD00000616 |
1-Chloro-4-methoxybenzene |
EINECS 210-772-2 |
p-Anisyl chloride |
Benzene, 1-chloro-4-methoxy- |
Anisole, p-chloro- |
4-Monochloroanisole |
4-Chlorophenyl methyl ether |
Anisyl chloride |
P-CHLOROANISOLE |