3-methoxypropene

Modify Date: 2024-01-02 14:58:23

3-methoxypropene Structure
3-methoxypropene structure
Common Name 3-methoxypropene
CAS Number 627-40-7 Molecular Weight 72.106
Density 0.8±0.1 g/cm3 Boiling Point 46.0±0.0 °C at 760 mmHg
Molecular Formula C4H8O Melting Point N/A
MSDS Chinese USA Flash Point -42.1±6.3 °C
Symbol GHS02 GHS07
GHS02, GHS07
Signal Word Danger

 Names

Name Allyl Methyl Ether
Synonym More Synonyms

 Chemical & Physical Properties

Density 0.8±0.1 g/cm3
Boiling Point 46.0±0.0 °C at 760 mmHg
Molecular Formula C4H8O
Molecular Weight 72.106
Flash Point -42.1±6.3 °C
Exact Mass 72.057518
PSA 9.23000
LogP 0.75
Vapour Pressure 354.4±0.0 mmHg at 25°C
Index of Refraction 1.376
Storage condition Refrigerator

 MSDS

Allyl Methyl Ether Revision number: 1
SAFETY DATA SHEET

Section1. BASE INFORMATION
Product name:Allyl Methyl Ether

Revision number:1

Section2. HAZARDS IDENTIFICATION
Classification of the GHS
PHYSICAL HAZARDS
Flammable liquidsCategory 2
HEALTH HAZARDS
Skin corrosion/irritationCategory 2
Category 2A
Serious eye damage/eye irritation
ENVIRONMENTAL HAZARDSNot classified
GHS label elements
Pictograms or hazard symbols
Signal wordDanger
Hazard statementHighly flammable liquid and vapour
Causes skin irritation
Causes serious eye irritation
Precautionary statements
[Prevention]Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
Keep container tightly closed.
Use explosion-proof electrical/ventilating/lighting equipment. Take precautionary
measures against ignition by the static discharge and the spark.
Wash hands thoroughly after handling.
Wear protective gloves/eye protection/face protection.
[Response]IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses,
if present and easy to do. Continue rinsing.
If eye irritation persists: Get medical advice/attention.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse
skin with water/shower.
If skin irritation occurs: Get medical advice/attention.
Take off contaminated clothing and wash before reuse.
[Storage]Store in a well-ventilated place. Keep cool.
[Disposal]Dispose of contents/container through a waste management company authorized by
the local government
Other hazards which do notMay form explosive peroxides.
result in classification
Allyl Methyl Ether

Section3. COMPOSITION/INFORMATION ON INGREDIENTS
Substance/mixture:Substance
Component(s):Allyl Methyl Ether
Percent:>97.0%(GC)
CAS Number:627-40-7
Synonyms:3-Methoxy-1-propene
Chemical Formula:C4H8O

Section4. FIRST AID MEASURES
Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Inhalation:
Get medical advice/attention if you feel unwell.
Skin contact:Remove/Take off immediately all contaminated clothing. Gently wash with plenty of
soap and water. If skin irritation or rash occurs: Get medical advice/attention.
Eye contact:Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing. If eye irritation persists: Get medical
advice/attention.
Ingestion:Get medical advice/attention if you feel unwell. Rinse mouth.
Protection of first-aiders:A rescuer should wear personal protective equipment, such as rubber gloves and air-
tight goggles.

Section5. FIRE-FIGHTING MEASURES
Suitable extinguishingDry chemical, foam, carbon dioxide.
media:
Extinguishing media not to Water (It may scatter and spread fire.)
be used:
Specific methods:Fire-extinguishing work is done from the windward and the suitable fire-extinguishing
method according to the surrounding situation is used. Uninvolved persons should
evacuate to a safe place. In case of fire in the surroundings: Keep containers cool by
spraying with water. Eliminate all ignition sources if safe to do so.
Special protectiveWhen extinguishing fire, be sure to wear personal protective equipment.
equipment for firefighters:

Section6. ACCIDENTAL RELEASE MEASURES
Use personal protective equipment. Keep people away from and upwind of spill/leak.
Personal precautions,
protective equipment and Ensure adequate ventilation. Entry to non-involved personnel should be controlled
emergency procedures: around the leakage area by roping off, etc.
Environmental precautions: Prevent product from entering drains.
Methods and materials for Absorb spilled material in dry sand or inert absorbent before recovering it into an
containment and cleaning airtight container. In case of large amount of spillage, contain a spill by bunding.
up: Adhered or collected material should be promptly disposed of, in accordance with
appropriate laws and regulations.
Prevention of secondary Remove all sources of ignition. Fire-extinguishing devices should be prepared in
hazards:case of a fire. Use spark-proof tools and explosion-proof equipment.

Section7. HANDLING AND STORAGE
Handling
Technical measures:Handling is performed in a well ventilated place. Wear suitable protective equipment.
Prevent generation of vapor or mist. Keep away from heat/sparks/open flame/hot
surfaces. -No smoking. Take measures to prevent the build up of electrostatic
charge. Use explosion-proof equipment. Wash hands and face thoroughly after
handling.
Use a closed system if possible. Use a ventilation, local exhaust if vapor or aerosol
will be generated.
Advice on safe handling:Avoid contact with skin, eyes and clothing.
Confirm in advance if peroxides exist when operations involving heating such as
distillation are carried out.
Storage
Allyl Methyl Ether

Section7. HANDLING AND STORAGE
Storage conditions:Keep container tightly closed. Store in an explosion-poof refregerator.
Store away from incompatible materials such as oxidizing agents.
Packaging material:Law is followed.

Section8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering controls:Install a closed system or local exhaust. Also install safety shower and eye bath.
Personal protective equipment
Respiratory protection: Vapor respirator. Follow local and national regulations.
Hand protection:Protective gloves.
Eye protection:Safety glasses. A face-shield, if the situation requires.
Skin and body protection: Protective clothing. Protective boots, if the situation requires.

Section9. PHYSICAL AND CHEMICAL PROPERTIES
Physical state (20°C):Liquid
Form:clear
Color:Colorless - Slightly pale yellow
Odor:No data available
pH: No data available
Melting point/freezing point:No data available
Boiling Point/Range:43 °C
Flash Point:-23°C
Explosive limits
Lower:No data available
Upper:No data available
Density:0.77
Solubility:Miscible with : Ethanol Ether
Soluble in : Acetone
Insoluble in: Water

Section10. STABILITY AND REACTIVITY
Stability:May form explosive peroxides.
No special reactivity has been reported.
Reactivity:
Conditions to avoid:Heat-sensitive
Incompartible materials: oxidizing agents
Hazardous Decomposition Carbon monoxide, Carbon dioxide
Products:

Section11. TOXICOLOGICAL INFORMATION
Acute Toxicity:No data available
Skin corrosion/irritation: No data available
Serious eyeNo data available
damage/irritation:
Germ cell mutagenicity: No data available
Carcinogenicity:
IARC =No data available
NTP =No data available
Reproductive toxicity:No data available

Section12. ECOLOGICAL INFORMATION
Ecotoxicity:
No data available
Fish:
Crustacea:No data available
No data available
Algae:
Persistence / degradability: No data available
No data available
Bioaccumulative
potential(BCF):
Allyl Methyl Ether

Section12. ECOLOGICAL INFORMATION
Mobillity in soil
No data available
log Pow:
Soil adsorption (Koc):No data available
No data available
Henry's Law
constant(PaM3/mol):

Section13. DISPOSAL CONSIDERATIONS
Recycle to process, if possible. Consult your local regional authorities. You may be able to burn in a chemical
incinerator equipped with an afterburner and scrubber system but exert extra care in igniting as this material is
highly flammable. Observe all federal, state and local regulations when disposing of the substance

Section14. TRANSPORT INFORMATION
3: Flammable liquid.
Hazards Class:
UN-No:3271
Ethers, n.o.s.
Proper shipping name:
Packing group:II

Section15. REGULATORY INFORMATION
Safe management ordinance of dangerous chemical product (State Council announces on January 26,
2002): Safe use and production, the storage of a dangerous chemical, transport, loading and unloading were
prescribed.


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

Symbol GHS02 GHS07
GHS02, GHS07
Signal Word Danger
Hazard Statements H225-H302-H319
Precautionary Statements P210-P305 + P351 + P338
Personal Protective Equipment Eyeshields;Faceshields;full-face respirator (US);Gloves;multi-purpose combination respirator cartridge (US)
Hazard Codes F:Flammable;Xn:Harmful;
Risk Phrases R11;R22;R36
Safety Phrases S3/7-S9-S16-S36/37/39-S26
RIDADR 3271
Packaging Group II
Hazard Class 3
HS Code 2909199090

 Synthetic Route

 Customs

HS Code 2909199090
Summary 2909199090. other acyclic ethers and their halogenated, sulphonated, nitrated or nitrosated derivatives. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:5.5%. General tariff:30.0%

 Synonyms

3-Methoxy-1-propene
MFCD00008649
1-Propene, 3-methoxy-
3-Methoxyprop-1-ene
3-methoxypropene
Methyl allyl ether
EINECS 210-997-6
Allyl Methyl Ether
AllylMethylEther