Chloro(cyclopentadienyl)[bis(diphenylphosphino)methane]ruthenium(II)

Modify Date: 2025-08-25 16:29:05

Chloro(cyclopentadienyl)[bis(diphenylphosphino)methane]ruthenium(II) Structure
Chloro(cyclopentadienyl)[bis(diphenylphosphino)methane]ruthenium(II) structure
Common Name Chloro(cyclopentadienyl)[bis(diphenylphosphino)methane]ruthenium(II)
CAS Number 71397-33-6 Molecular Weight 586.00600
Density N/A Boiling Point N/A
Molecular Formula C30H27ClP2Ru Melting Point 190 - 196 ℃
MSDS Chinese USA Flash Point N/A

 Names

Name Chloro(cyclopentadienyl)[bis(diphenylphosphino)methane]ruthenium(II)
Synonym More Synonyms

 Chemical & Physical Properties

Melting Point 190 - 196 ℃
Molecular Formula C30H27ClP2Ru
Molecular Weight 586.00600
Exact Mass 586.03200
PSA 27.18000
LogP 6.92070
Storage condition 2-8°C

 MSDS


Section 1: Product Identification
Chemical Name:Chloro(cyclopentadienyl)[bis(diphenylphosphino)methane]ruthenium (II), min. 97%
CAS Registry Number:71397-33-6
Formula:RuCl(C6H5)[(C6H5)2PCH2P(C6H5)2]
EINECS Number:none
Chemical Family:metal phosphine complex
Synonym:Chloro[bis(diphenylphosphino)methane](cyclopentadienyl)ruthenium (II), min. 97%

Section 2: Composition and Information on Ingredients
IngredientCAS NumberPercentACGIH (TWA)OSHA (PEL)
Title compound71397-33-6100%no datano data

Section 3: Hazards Identification
Emergency Overview:Irritating to skin, eyes and respiratory tract.
Primary Routes of Exposure:Inhalation, ingestion, skin, eyes
Eye Contact:Causes slight to mild irritation of the eyes.
Skin Contact:Causes mild irritation of the skin.
Inhalation:Irritating to the nose, mucous membranes and respiratory tract.
Ingestion:No information available on the physiological effects of ingestion.
Acute Health Affects:Irritating to skin, eyes and respiratory tract.
Chronic Health Affects:No information on long-term chronic effects.
NTP:No
IARC:No
OSHA:No

SECTION 4: First Aid Measures
Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need
Eye Exposure:
assistance in keeping their eye lids open. Get immediate medical attention.
Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if
Skin Exposure:
irritation persists.
Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty
Inhalation:
in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance.
Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce
Ingestion:
vomiting only if directed by medical personnel.

SECTION 5: Fire Fighting Measures
Flash Point:no data
Autoignition Temperature:none
Explosion Limits:none
Extinguishing Medium:carbon dioxide, dry powder or foam
If this product is involved in a fire, fire fighters should be equipped with a NIOSH approved positive pressure
Special Fire Fighting Procedures:
self-contained breathing apparatus and full protective clothing.
Hazardous Combustion andIf involved in a fire, this material may emit irritating fumes.
Decomposion Products:
Unusual Fire or Explosion Hazards: No unusual fire or explosion hazards.

SECTION 6: Accidental Release Measures
Spill and Leak Procedures:Small spills can be mixed with vermiculite or sodium carbonate and swept up.

SECTION 7: Handling and Storage
Handling and Storage:Store in a tightly sealed container. Keep in a cool, dry, well ventilated place.

SECTION 8: Exposure Controls and Personal Protection
Eye Protection:Always wear approved safety glasses when handling a chemical substance in the laboratory.
Skin Protection:Wear protective clothing and gloves.
Ventilation:Handle the material in an efficient fume hood.
If ventilation is not available a respirator should be worn. The use of respirators requires a Respirator
Respirator:
Protection Program to be in compliance with 29 CFR 1910.134.
Ventilation:Handle the material in an efficient fume hood.
Additional Protection:No additional protection required.

SECTION 9: Physical and Chemical Properties
Color and Form:orange xtl
Molecular Weight:586.01
Melting Point:no data
Boiling Point:no data
Vapor Pressure:no data
Specific Gravity:no data
Odor:not determined
Solubility in Water:insoluble

SECTION 10: Stability and Reactivity
Stability:air and moisture stable
Hazardous Polymerization:no hazardous polymerization
Conditions to Avoid:none
Incompatibility:oxidizing agents, halogens and active metals.
Decomposition Products:carbon monoxide, carbon dioxide, organic fumes, phosphorous pentoxide and ruthenium oxide.

SECTION 11: Toxicological Information
RTECS Data:No information available in the RTECS files.
Carcinogenic Effects:No data
Mutagenic Effects:No data
Tetratogenic Effects:No data

SECTION 12: Ecological Information
Ecological Information:No information available

SECTION 13: Disposal Considerations
Disposal:Dispose of according to local, state and federal regulations.

SECTION 14: Transportation
Shipping Name (CFR):Non-hazardous
Hazard Class (CFR):NA
Additional Hazard Class (CFR):NA
Packaging Group (CFR):NA
UN ID Number (CFR):NA
Shipping Name (IATA):Non-hazardous
Hazard Class (IATA):NA
Additional Hazard Class (IATA):NA
Packaging Group (IATA):NA
UN ID Number (IATA):NA

SECTION 15: Regulatory Information
TSCA:Not listed in the TSCA inventory
SARA (Title 313):Title compound not listed
Second Ingredient:none


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

Hazard Codes Xi
RIDADR NONH for all modes of transport

 Synonyms

MFCD07782002
The content on this webpage is sourced from various professional data sources. If you have any questions or concerns regarding the content, please feel free to contact service1@chemsrc.com.
Top Suppliers:I want be here


Get all suppliers and price by the below link:

Chloro(cyclopentadienyl)[bis(diphenylphosphino)methane]ruthenium(II) suppliers


Price: ¥6015/1g

Reference only. check more Chloro(cyclopentadienyl)[bis(diphenylphosphino)methane]ruthenium(II) price