MERCURY(II) IODIDE

Modify Date: 2024-01-02 16:15:30

MERCURY(II) IODIDE Structure
MERCURY(II) IODIDE structure
Common Name MERCURY(II) IODIDE
CAS Number 7774-29-0 Molecular Weight 454.39900
Density 6.36 Boiling Point 354 °C(lit.)
Molecular Formula HgI2 Melting Point 259 °C(lit.)
MSDS Chinese USA Flash Point 350°C subl.
Symbol GHS06 GHS08 GHS09
GHS06, GHS08, GHS09
Signal Word Danger

 Names

Name mercury diiodide
Synonym More Synonyms

 Chemical & Physical Properties

Density 6.36
Boiling Point 354 °C(lit.)
Melting Point 259 °C(lit.)
Molecular Formula HgI2
Molecular Weight 454.39900
Flash Point 350°C subl.
Exact Mass 455.78000
Appearance of Characters beads
Storage condition Store at RT.
Stability Stable. Incompatible with strong oxidizing agents, potassium, sodium, interhalogens. Light-sensitive.
Water Solubility potassium iodide solution: passes test

 MSDS

Name: Mercury (II) Iodide Material Safety Data Sheet
Synonym: Mercuric Iodide; Mercury Diiodide; Red Mercuric Iodide.
CAS: 7774-29-0
Section 1 - Chemical Product MSDS Name: Mercury (II) Iodide Material Safety Data Sheet
Synonym: Mercuric Iodide; Mercury Diiodide; Red Mercuric Iodide.
SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
7774-29-0 MERCURIC IODIDE >99 231-873-8
Hazard Symbols: T+ N
Risk Phrases: 26/27/28 33 50/53
SECTION 3 - HAZARDS IDENTIFICATION EMERGENCY OVERVIEW Very toxic by inhalation, in contact with skin and if swallowed. Danger of cumulative effects. Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.Highly toxic.Light sensitive. Potential Health Effects
Eye:
Contact may cause severe eye irritation and possible eye damage.
Skin:
May cause severe skin irritation. May be absorbed through the skin.
Ingestion:
May be fatal if swallowed. Poison by ingestion. May cause kidney damage. May cause severe digestive tract irritation with abdominal pain, nausea, vomiting and diarrhea. May cause corrosion and permanent tissue destruction of the esophagus and digestive tract. Can cause nervous system damage.
Inhalation:
May cause severe irritation of the respiratory tract with sore throat, coughing, shortness of breath and delayed lung edema. May cause effects similar to those described for ingestion.
Chronic:
Chronic inhalation and ingestion may cause effects similar to those of acute inhalation and ingestion. Prolonged or repeated exposure may cause adverse reproductive effects. May cause fetal effects.
SECTION 4 - FIRST AID MEASURES
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Do NOT use mouth-to-mouth resuscitation.
Notes to Physician:
Antidote: The use of Dimercaprol or BAL (British Anti-Lewisite) as a chelating agent should be determined by qualified medical personnel.
SECTION 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Combustion generates toxic fumes.
Extinguishing Media:
For small fires, use water spray, dry chemical, carbon dioxide or chemical foam.
SECTION 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective Equipment section. Sweep up, then place into a suitable container for disposal. Avoid generating dusty conditions. Provide ventilation.
SECTION 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Minimize dust generation and accumulation. Do not get in eyes, on skin, or on clothing. Keep container tightly closed. Do not ingest or inhale. Store protected from light.
Storage:
Do not store in direct sunlight. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Poison room locked.
SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate general or local explosion-proof ventilation to keep airborne levels to acceptable levels. Exposure Limits CAS# 7774-29-0:
United States OSHA: 0.1 mg/m3 Ceiling (listed under Mercury, ary and inorganic compounds). Belgium - TWA: (listed as mercury, aryl and inorganic compounds): mg/m3 VLE (as Hg) France - VME: (listed as mercury, aryl and inorganic compounds): mg/m3 VME (as Hg)
Germany: (listed as mercury, aryl and inorganic compounds): 0.1 m VME (as Hg)
Germany: (listed as mercury inorganic compounds): Skin absorber
Malaysia: (listed as mercury, aryl and inorganic compounds): 0.1 mg/m3 TWA (as Hg)
Netherlands: (listed as mercury inorganic compounds): 0.15 mg/m3
Netherlands: (listed as mercury inorganic compounds): 0.05 mg/m3
Russia: (listed as mercury inorganic compounds): 0.2 mg/m3 TWA (a Hg)
Russia: (listed as mercury inorganic compounds): 0.05 mg/m3 STEL Hg)
Spain: (listed as mercury, aryl and inorganic compounds): 0.1 mg/ VLA-ED (as Hg) Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Solid
Color: red
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 662 deg F
Freezing/Melting Point: 498.2 deg F
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Insoluble in water.
Specific Gravity/Density: 6.3600
Molecular Formula: HgI2
Molecular Weight: 454.399
SECTION 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
High temperatures, incompatible materials, light, dust generation, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents, chlorine trifluoride, potassium, sodium, light.
Hazardous Decomposition Products:
Hydrogen iodide, mercury/mercury oxides.
Hazardous Polymerization: Has not been reported.
SECTION 11 - TOXICOLOGICAL INFORMATION RTECS#: CAS# 7774-29-0: OW5250000
LD50/LC50:
CAS# 7774-29-0: Oral, mouse: LD50 = 17 mg/kg; Oral, rat: LD50 = 18 mg/kg; Skin, rat: LD50 = 75 mg/kg.
Carcinogenicity:
MERCURIC IODIDE - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
SECTION 12 - ECOLOGICAL INFORMATION Other No information available.
SECTION 13 - DISPOSAL CONSIDERATIONS Products which are considered hazardous for supply are classified as Special Waste and the disposal of such chemicals is covered by regulations which may vary according to location. Contact a specialist disposal company or the local waste regulator for advice. Empty containers must be decontaminated before returning for recycling.
SECTION 14 - TRANSPORT INFORMATION IATA
Shipping Name: MERCURY IODIDE
Hazard Class: 6.1
UN Number: 1638
Packing Group: II IMO
Shipping Name: MERCURY IODIDE
Hazard Class: 6.1
UN Number: 1638
Packing Group: II RID/ADR
Shipping Name: MERCURY IODIDE
Hazard Class: 6.1
UN Number: 1638
Packing group: II
SECTION 15 - REGULATORY INFORMATION European/International Regulations European Labeling in Accordance with EC Directives
Hazard Symbols: T+ N
Risk Phrases:
R 26/27/28 Very toxic by inhalation, in contact with skin and if swallowed. R 33 Danger of cumulative effects. R 50/53 Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
Safety Phrases:
S 13 Keep away from food, drink and animal feeding stuffs. S 28 After contact with skin, wash immediately with... S 45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). S 60 This material and its container must be disposed of as hazardous waste. S 61 Avoid release to the environment. Refer to special instructions/safety data sheets. WGK (Water Danger/Protection) CAS# 7774-29-0: 3 Canada CAS# 7774-29-0 is listed on Canada's DSL List. CAS# 7774-29-0 is listed on Canada's Ingredient Disclosure List. US FEDERAL TSCA CAS# 7774-29-0 is listed on the TSCA inventory.
SECTION 16 - ADDITIONAL INFORMATION
MSDS Creation Date: 12/12/1997 Revision #4 Date: 3/18/2003 The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no way shall the company be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if the company has been advised of the possibility of such damages.

SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

Symbol GHS06 GHS08 GHS09
GHS06, GHS08, GHS09
Signal Word Danger
Hazard Statements H300 + H310 + H330-H373-H410
Precautionary Statements Missing Phrase - N15.00950417-P260-P262-P280-P302 + P352 + P310-P304 + P340 + P310
Personal Protective Equipment Eyeshields;Faceshields;full-face particle respirator type N100 (US);Gloves;respirator cartridge type N100 (US);type P1 (EN143) respirator filter;type P3 (EN 143) respirator cartridges
Hazard Codes T+;N
Risk Phrases R33;R26/27/28;R50/53
Safety Phrases S13;S28;S45;S60;S61
RIDADR UN 1638 6.1/PG 2
WGK Germany 3
RTECS OW5250000
Packaging Group II
HS Code 2827600000

 Precursor & DownStream

Precursor  0

DownStream  2

 Customs

HS Code 2827600000

 Articles29

More Articles
A non-invasive technique for continuous monitoring of left ventricular function using a new solid state mercuric iodide radiation detector.

Clin. Sci. 66(5) , 551-6, (1984)

A miniature solid-state mercuric iodide (HgI2) nuclear probe detector has been developed in conjunction with a computerized nuclear probe (Nuclear Stethoscope) to enable continuous non-invasive monito...

Advanced mercuric iodide detectors for X-ray microanalysis.

Scanning Microsc. Suppl. 1 , 135-50, (1987)

We first present a brief tutorial on Mercuric Iodide (HgI2) detectors and the intimately related topic of near-room temperature ultralow noise preamplifiers. This provides both a physical basis and te...

Autoantibodies to sweat glands detected by different methods in serum and in tissue from patients affected by a new variant of endemic pemphigus foliaceus.

Arch. Dermatol. Res. 301(10) , 711-8, (2009)

Examining the patients with a new variant of endemic pemphigus foliaceus (EPF) in El Bagre, Colombia, (El Bagre-EPF), we noted several polymorphic clinical lesions around their axillary areas. Based o...

 Synonyms

EINECS 231-873-8
mercuric chloride
Mercury monochloride
Mercury protochloride
Mild mercury chloride
mercuric iodide
Precipite blanc
Mercury chloride
MFCD00011044
Mercury(II) iodide
Top Suppliers:I want be here

No recommended suppliers.


Get all suppliers and price by the below link:

MERCURY(II) IODIDE suppliers

MERCURY(II) IODIDE price

Hot Compounds More...
Dichloromethane
CAS#:75-09-2
Polyacrylic acid
CAS#:9003-01-4
sodium carbonate
CAS#:497-19-8
Silicon dioxide
CAS#:7631-86-9
Triethanolamine
CAS#:102-71-6
Demeton
CAS#:126-75-0
Water
CAS#:7732-18-5
4-(4-Piperidinyl)morpholine dihydrochloride
CAS#:53617-35-9
Diclofenac sodium
CAS#:15307-79-6
Budesonide
CAS#:51372-29-3