Sodium lauryl polyoxyethylene ether sulfate structure
|
Common Name | Sodium lauryl polyoxyethylene ether sulfate | ||
---|---|---|---|---|
CAS Number | 9004-82-4 | Molecular Weight | 332.432 | |
Density | N/A | Boiling Point | N/A | |
Molecular Formula | (C2H4O)nC12H26O4S.Na | Melting Point | N/A | |
MSDS | N/A | Flash Point | N/A |
Use of Sodium lauryl polyoxyethylene ether sulfateSodium lauryl polyoxyethylene ether sulfate is an anionic surfactant, with excellent decontamination, emulsification, dispersion, wetting, solubilizing performance and foaming property.Target:Good solvency, thickening effect, wide compatibility, anti-hard water and high biodegradable ability. Low irritation to skin and eyes. Widely used in liquid detergent such as dishwashing detergent, shampoo, bubble bath liquid, hand washing etc. In washing powder and detergent for heavy dirty, using it to partially replace LABSA, phosphate can be saved or reduced, and general dosage of active matter is reduced. In textile, printing and dyeing industry, petroleum and leather industry, it can be used as lubricant, dyeing agent, cleanser, foaming agent and degreasing agent. |
Name | Sodium lauryl polyoxyethylene ether sulfate |
---|---|
Synonym | More Synonyms |
Description | Sodium lauryl polyoxyethylene ether sulfate is an anionic surfactant, with excellent decontamination, emulsification, dispersion, wetting, solubilizing performance and foaming property.Target:Good solvency, thickening effect, wide compatibility, anti-hard water and high biodegradable ability. Low irritation to skin and eyes. Widely used in liquid detergent such as dishwashing detergent, shampoo, bubble bath liquid, hand washing etc. In washing powder and detergent for heavy dirty, using it to partially replace LABSA, phosphate can be saved or reduced, and general dosage of active matter is reduced. In textile, printing and dyeing industry, petroleum and leather industry, it can be used as lubricant, dyeing agent, cleanser, foaming agent and degreasing agent. |
---|---|
Related Catalog |
Molecular Formula | (C2H4O)nC12H26O4S.Na |
---|---|
Molecular Weight | 332.432 |
Exact Mass | 332.163330 |
PSA | 84.04000 |
LogP | 4.48150 |
Stability | Stable. Incompatible with strong oxidizing agents. |
Section 1. Chemical Product and Company Identification Sodium Laureth Sulfate Common Name/ Trade Name Sodium Laureth Sulfate Section 3. Hazards Identification Potential Acute Health Effects Hazardous in case of skin contact (irritant), of eye contact (irritant). Slightly hazardous in case of skin contact
(permeator), of ingestion, of inhalation. Potential Chronic HealthCARCINOGENIC EFFECTS: Not available. EffectsMUTAGENIC EFFECTS: Not available. TERATOGENIC EFFECTS: Not available. DEVELOPMENTAL TOXICITY: Not available. Section 4. First Aid Measures Eye ContactCheck for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Cold water may be used. Get medical attention. Skin ContactIn case of contact, immediately flush skin with plenty of water. Cover the irritated skin with an emollient. Remove contaminated clothing and shoes. Cold water may be used.Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical attention. Serious Skin ContactWash with a disinfectant soap and cover the contaminated skin with an anti-bacterial cream. Seek medical attention. InhalationIf inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention. Serious InhalationNot available. IngestionDo NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Loosen tight clothing such as a collar, tie, belt or waistband. Get medical attention if symptoms appear. Serious IngestionNot available. Section 5. Fire and Explosion Data Flammability of the Product May be combustible at high temperature. Auto-Ignition Temperature Not available. Flash PointsCLOSED CUP: 94°C (201.2°F). OPEN CUP: >100°C (212° F) (Cleveland.). Flammable LimitsNot available. Products of CombustionNot available. Fire Hazards in Presence ofSlightly flammable to flammable in presence of heat. Various SubstancesNon-flammable in presence of open flames and sparks, of shocks, of oxidizing materials, of reducing materials, of combustible materials, of organic materials, of metals, of acids, of alkalis. Because of the large amount of water contained in the product, the product might be combustible only after partial or complete evaporation. Explosion Hazards in Presence Non-explosive in presence of open flames and sparks, of shocks. of Various Substances Fire Fighting MediaSMALL FIRE: Use DRY chemical powder. and InstructionsLARGE FIRE: Use water spray, fog or foam. Do not use water jet. Special Remarks onNot available. Fire Hazards Special Remarks on Explosion Not available. Hazards Sodium Laureth Sulfate Section 6. Accidental Release Measures Small SpillDilute with water and mop up, or absorb with an inert dry material and place in an appropriate waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements. Large SpillAbsorb with an inert material and put the spilled material in an appropriate waste disposal. Finish cleaning by spreading water on the contaminated surface and allow to evacuate through the sanitary system. Section 7. Handling and Storage PrecautionsKeep away from heat. Keep away from sources of ignition. Ground all equipment containing material. Do not ingest. Do not breathe gas/fumes/ vapor/spray. Wear suitable protective clothing. If ingested, seek medical advice immediately and show the container or the label. Avoid contact with skin and eyes. Keep away from incompatibles such as oxidizing agents. Keep container tightly closed. Keep container in a cool, well-ventilated area. Storage Section 8. Exposure Controls/Personal Protection Engineering ControlsProvide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors below their respective threshold limit value. Ensure that eyewash stations and safety showers are proximal to the work-station location. Personal ProtectionSplash goggles. Lab coat. Gloves. Respiratory protection is not necessary for normal handling. Good room ventilation or use of local exhaust (fume hood) is sufficient. Use a vapor respirator under conditions where exposure to the substance is apparent (e.g. generation of high concentrations of mist or vapor, inadequate ventilation, development of respiratory tract irritation), and engineering controls are not feasible. Be sure to use an approved/certified respirator or equivalent. Personal Protection in Case of Splash goggles. Full suit. Boots. Gloves. Suggested protective clothing might not be sufficient; consult a a Large Spillspecialist BEFORE handling this product. Exposure LimitsNot available. Section 9. Physical and Chemical Properties Physical state and appearance Liquid.OdorNot available. TasteNot available. Molecular WeightNot applicable. Colorless to light yellow. Clear Color pH (1% soln/water)Not available Boiling Point100°C (212°F) Not available. Melting Point Critical TemperatureNot available. 1.03 (Water = 1) Specific Gravity Vapor PressureThe highest known value is 2.3 kPa (@ 20°C) (Water) . Vapor DensityThe highest known value is 0.62 (Air = 1) (Water). VolatilityNot available. Odor ThresholdNot available. Not available. Water/Oil Dist. Coeff. Ionicity (in Water)Not available. Dispersion PropertiesSee solubility in water. SolubilitySoluble in cold water. Soluble in alcohol and glycols Sodium Laureth Sulfate Section 10. Stability and Reactivity Data The product is stable. Stability Instability TemperatureNot available. Conditions of InstabilityExcess heat, incompatible materials Incompatibility with variousReactive with oxidizing agents. substances Not available. Corrosivity Special Remarks onNot available. Reactivity Not available. Special Remarks on Corrosivity PolymerizationWill not occur. Section 11. Toxicological Information Routes of EntryAbsorbed through skin. Eye contact. Ingestion. Toxicity to AnimalsAcute oral toxicity (LD50): 4848 - 5000 mg/kg (Rat) (Calculated value for the mixture). Chronic Effects on Humans Not available. Other Toxic Effects onHazardous in case of skin contact (irritant), pf eye contact (irritant). HumansSlightly hazardous in case of skin contact (permeator), of ingestion, of inhalation. Special Remarks onNot available. Toxicity to Animals Special Remarks onThis product contains <0.1% Formaldehyde which can cause cancer. Chronic Effects on HumansThis product contains trace amounts of 1,4-Dioxane and Ethylene Oxide which can cause cancer. This product may contain trace amounts of Ethylene oxide which may cause adverse reproductive effects and birth defects. Special Remarks on otherAcute Potential Health Effects: Toxic Effects on HumansSkin: Causes skin irritation. It may be absorbed through the skin. Eyes: Causes eye irritation. Inhalation: Inhalation of mist or vapors may cause respiratory tract irritation. Ingestion: Low hazard. May cause digestive/gastrointestinal tract irritation. Section 12. Ecological Information EcotoxicityNot available. BOD5 and CODNot available. Products of BiodegradationPossibly hazardous short term degradation products are not likely. However, long term degradation products may arise. Toxicity of the ProductsNot available. of Biodegradation Special Remarks on theNot available. Products of Biodegradation Sodium Laureth Sulfate Section 13. Disposal Considerations Waste DisposalWaste must be disposed of in accordance with federal, state and local environmental control regulations. Section 14. Transport Information DOT Classification Not a DOT controlled material (United States). Not applicable. Identification Not applicable. Special Provisions for Transport DOT (Pictograms) Section 15. Other Regulatory Information and Pictograms California prop. 65: This product contains the following ingredients for which the State of California has found Federal and State to cause cancer, birth defects or other reproductive harm, which would require a warning under the statute: Regulations Formaldehyde, 1,4-dioxane, Ethylene oxide California prop. 65: This product contains the following ingredients for which the State of California has found to cause reproductive harm (female) which would require a warning under the statute: Ethylene oxide California prop. 65: This product contains the following ingredients for which the State of California has found to cause cancer which would require a warning under the statute: Formaldehyde, 1,4-dioxane, Ethylene oxide TSCA 8(b) inventory: Water; Sodium Lauryl Ether Sulfate CaliforniaCalifornia prop. 65: This product contains the following ingredients for which the State of California has found to cause cancer which would require a warning under the statute: Formaldehyde, 1,4-dioxane, Proposition 65 Ethylene oxide Warnings California prop. 65: This product contains the following ingredients for which the State of California has found to cause birth defects which would require a warning under the statute: No products were found. Other RegulationsFor CAS no. 9004-82-4: EINECS: This product is not on the European Inventory of Existing Commercial Chemical Substances. Canada: Listed on Canadian Domestic Substance List (DSL). China: Listed on National Inventory. Japan: Listed on National Inventory (ENCS). Korea: Listed on National Inventory (KECI). Philippines: Listed on National Inventory (PICCS). Australia: Listed on AICS. WHMIS (Canada) CLASS D-2B: Material causing other toxic effects (TOXIC). Other Classifications DSCL (EEC)R36/38- Irritating to eyes and skin.S26- In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37- Wear suitable protective clothing and gloves. Health Hazard HMIS (U.S.A.)2 National Fire Protection 0 Flammability 0 Association (U.S.A.) Fire Hazard 2 0 Reactivity Health Reactivity 0 Specific hazard Personal Protection j WHMIS (Canada) (Pictograms) Sodium Laureth Sulfate DSCL (Europe) (Pictograms) TDG (Canada) (Pictograms) ADR (Europe) (Pictograms) Protective Equipment Gloves. Lab coat. Wear appropriate respirator when ventilation is inadequate. SECTION 16 - ADDITIONAL INFORMATION N/A |
CHEMICAL IDENTIFICATION
HEALTH HAZARD DATAACUTE TOXICITY DATA
|
Hazard Codes | Xn |
---|---|
HS Code | 2833400000 |
HS Code | 2833400000 |
---|
Sodium 2-(dodecyloxy)ethyl sulfate |
Sodium laureth sulfate |
sodium tridecylbenzenesulphonate |
sodium C12-14 lauryl ether sulfate |
tridecyl-benzenesulfonicacisodiumsalt |
Ethanol, 2-(dodecyloxy)-, hydrogen sulfate, sodium salt (1:1) |
TRIDECYLBENZENE SODIUM SULFONATE |
tridecylbenzenesulfonicacidsodiumsalt |