butan-1-ol,[2,6-di(propan-2-yl)phenyl]imino-(2-methyl-2-phenylpropylidene)molybdenum

Modify Date: 2024-01-06 08:14:00

butan-1-ol,[2,6-di(propan-2-yl)phenyl]imino-(2-methyl-2-phenylpropylidene)molybdenum Structure
butan-1-ol,[2,6-di(propan-2-yl)phenyl]imino-(2-methyl-2-phenylpropylidene)molybdenum structure
Common Name butan-1-ol,[2,6-di(propan-2-yl)phenyl]imino-(2-methyl-2-phenylpropylidene)molybdenum
CAS Number 126949-65-3 Molecular Weight 549.66000
Density 1 g/cm3 Boiling Point N/A
Molecular Formula C30H47MoNO2 Melting Point N/A
MSDS N/A Flash Point N/A

 Names

Name butan-1-ol,[2,6-di(propan-2-yl)phenyl]imino-(2-methyl-2-phenylpropylidene)molybdenum
Synonym More Synonyms

 Chemical & Physical Properties

Density 1 g/cm3
Molecular Formula C30H47MoNO2
Molecular Weight 549.66000
Exact Mass 551.26600
PSA 30.82000
LogP 9.14830

 MSDS


Section 1: Product Identification
Chemical Name:2,6-Diisopropylphenylimido neophylidene molybdenum(VI) bis(t-butoxide)
CAS Registry Number:126949-65-3
Formula:Mo(C10H12)(C12H17N)(OC4H9)2
EINECS Number:none
Chemical Family:organometallic complexes
Synonym:Schrock Hoveyda catalyst

Section 2: Composition and Information on Ingredients
IngredientCAS NumberPercentACGIH (TWA)OSHA (PEL)
Title compound126949-65-3100%10mg/m3( as Mo)15mg/m3 (as Mo)

Section 3: Hazards Identification
Emergency Overview:Irritating to the respiratory tract, skin and eyes. May be harmful if swallowed.
Primary Routes of Exposure:Ingestion, inhalation
Eye Contact:Causes severe irritation of the eyes.
Skin Contact:Causes slight to mild irritation of the skin.
Inhalation:Irritating to skin, eyes and respiratory tract.
Ingestion:No specific information is available on the physiological effects of ingestion.
Acute Health Affects:Irritating to skin, eyes and respiratory tract.
No information available on long-term chronic effects. t-butanol in high doses has acted as a reproductive
Chronic Health Affects:
effector.
NTP:No
IARC:No
OSHA:No

SECTION 4: First Aid Measures
Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need
Eye Exposure:
assistance in keeping their eye lids open. Get immediate medical attention.
Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if
Skin Exposure:
irritation persists.
Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty in
Inhalation:
breathing, coughing, wheezing or pain. In such cases seek immediate medical assistance.
Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce
Ingestion:
vomiting only if directed by medical personnel.

SECTION 5: Fire Fighting Measures
Flash Point:no data
Autoignition Temperature:no data
Explosion Limits:no data
Extinguishing Medium:carbon dioxide, dry powder or foam.
If involved in a fire, fire fighters should be equipped with NIOSH approved positive pressure self-contained
Special Fire Fighting Procedures:
breathing apparatus and full protective clothing.
Hazardous Combustion andIf involved in a fire this material may emit toxic organic fumes.
Decomposion Products:
Unusual Fire or Explosion Hazards: No unusual fire or explosion hazards.

SECTION 6: Accidental Release Measures
Small spills can be mixed with vermiculite, sodium carbonate or other suitable non combustible adsorbent and
Spill and Leak Procedures:
swept up.

SECTION 7: Handling and Storage
Handling and Storage:Handle and store the material under an inert atmosphere of nitrogen or argon. Keep away from heat.

SECTION 8: Exposure Controls and Personal Protection
Eye Protection:Always wear approved safety glasses when handling a chemical substance in the laboratory.
Skin Protection:Wear protective clothing and gloves.
Ventilation:Material may form a fine dust. If possible, handle the material in an efficient fume hood.
If ventilation is not available a respirator should be worn. The use of respirators requires a Respiratory
Respirator:
Protection Program to be in compliance with 29 CFR 1910.134.
Ventilation:Material may form a fine dust. If possible, handle the material in an efficient fume hood.
Additional Protection:No additional protection required.

SECTION 9: Physical and Chemical Properties
Color and Form:yellow to orange powder
Molecular Weight:549.65
Melting Point:no data
Boiling Point:no data
Vapor Pressure:no data
Specific Gravity:1
Odor:not determined
Solubility in Water:reacts with water

SECTION 10: Stability and Reactivity
Stability:air and moisture sensitive (store cold)
Hazardous Polymerization:No hazardous polymerization.
Conditions to Avoid:contact with air and moisture
Incompatibility:oxidizing agents and halogens
Decomposition Products:carbon monoxide, carbon dioxide, organic fumes and molybdenum oxide.

SECTION 11: Toxicological Information
RTECS Data:No information available in the RTECS files.
Carcinogenic Effects:no data
Mutagenic Effects:no data
Tetratogenic Effects:no data

SECTION 12: Ecological Information
Ecological Information:No information available

SECTION 13: Disposal Considerations
Disposal:Dispose of according to local, state and federal regulations.

SECTION 14: Transportation
Shipping Name (CFR):Non-hazardous
Hazard Class (CFR):NA
Additional Hazard Class (CFR):NA
Packaging Group (CFR):NA
UN ID Number (CFR):NA
Shipping Name (IATA):Non-hazardous
Hazard Class (IATA):NA
Additional Hazard Class (IATA):NA
Packaging Group (IATA):NA
UN ID Number (IATA):NA

SECTION 15: Regulatory Information
TSCA:Not listed in the TSCA inventory
SARA (Title 313):Title compound not listed.
Second Ingredient:none


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

Risk Phrases 20/21/22-36/37/38
Safety Phrases 22-36/37/39

 Synonyms

2,5-DIHYDROTHIOPHENE-3-CARBOXYLIC ACID METHYL ESTER
2,6-Diisopropylphenylimidoneophylidene molybdenum(VI) bis(t-butoxide)
Top Suppliers:I want be here

No recommended suppliers.

Hot Compounds More...
Dichloromethane
CAS#:75-09-2
Polyacrylic acid
CAS#:9003-01-4
sodium carbonate
CAS#:497-19-8
Silicon dioxide
CAS#:7631-86-9
Triethanolamine
CAS#:102-71-6
Demeton
CAS#:126-75-0
Water
CAS#:7732-18-5
4-(4-Piperidinyl)morpholine dihydrochloride
CAS#:53617-35-9
Diclofenac sodium
CAS#:15307-79-6
Budesonide
CAS#:51372-29-3