(1Z,5Z)-cycloocta-1,5-diene,cyclopentyl-di(propan-2-yl)phosphane,iron,rhodium,tetrafluoroborate

Modify Date: 2024-01-02 17:02:55

(1Z,5Z)-cycloocta-1,5-diene,cyclopentyl-di(propan-2-yl)phosphane,iron,rhodium,tetrafluoroborate Structure
(1Z,5Z)-cycloocta-1,5-diene,cyclopentyl-di(propan-2-yl)phosphane,iron,rhodium,tetrafluoroborate structure
Common Name (1Z,5Z)-cycloocta-1,5-diene,cyclopentyl-di(propan-2-yl)phosphane,iron,rhodium,tetrafluoroborate
CAS Number 157772-65-1 Molecular Weight 716.20500
Density N/A Boiling Point N/A
Molecular Formula C30H48BF4FeP2Rh Melting Point N/A
MSDS N/A Flash Point N/A

 Names

Name (1Z,5Z)-cycloocta-1,5-diene,cyclopentyl-di(propan-2-yl)phosphane,iron,rhodium,tetrafluoroborate
Synonym More Synonyms

 Chemical & Physical Properties

Molecular Formula C30H48BF4FeP2Rh
Molecular Weight 716.20500
Exact Mass 716.16600
PSA 27.18000
LogP 10.69330

 MSDS


Section 1: Product Identification
Chemical Name:1,1'-Bis(di-i-propylphosphino)ferrocene(1,5-cyclooctadiene)rhodium (I) tetrafluoroborate, min. 98%
CAS Registry Number:157772-65-1
Formula:[[(C3H7)2PC5H4]2Fe](C8H12)Rh+BF4-
EINECS Number:none
Chemical Family:Organophosphine complex
Synonym:1,1'-Bis(di-i-propylphosphanyl)ferrocene(1,5-cyclooctadiene) rhodium (I) tetrafluoroborate

Section 2: Composition and Information on Ingredients
IngredientCAS NumberPercentACGIH (TWA)OSHA (PEL)
Title compound157772-65-1100%2.5mg/m3 (as F)2.5mg/m3 (as F)

Section 3: Hazards Identification
Emergency Overview:Irritating to the respiratory tract, skin and eyes. May be harmful if swallowed.
Primary Routes of Exposure:Ingestion, skin
Eye Contact:Causes slight to mild irritation of the eyes.
Skin Contact:Causes slight to mild irritation of the skin.
Inhalation:Irritating to skin, eyes and respiratory tract.
Ingestion:No information on the physiological effects of ingestion.
Acute Health Affects:Irritating to skin, eyes and respiratory tract.
Chronic Health Affects:There is no information on the effects of long-term exposure.
NTP:No
IARC:No
OSHA:No

SECTION 4: First Aid Measures
Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need
Eye Exposure:
assistance in keeping their eye lids open. Get immediate medical attention.
Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if
Skin Exposure:
irritation persists.
Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty
Inhalation:
in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance.
Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce
Ingestion:
vomiting only if directed by medical personnel.

SECTION 5: Fire Fighting Measures
Flash Point:not applicable
Autoignition Temperature:none
Explosion Limits:none
Extinguishing Medium:carbon dioxide, dry powder or foam
If this material is involved in a fire, fire fighters should be equipped with a NIOSH approved positive pressure
Special Fire Fighting Procedures:
self-contained breathing apparatus and full protective clothing.
Hazardous Combustion andIf involved in a fire this material may emit toxic organic fumes, and corrosive fumes of hydrofluoric and
Decomposion Products:phosphoric acids.
Unusual Fire or Explosion Hazards: No unusual fire or explosion hazards.

SECTION 6: Accidental Release Measures
Spill and Leak Procedures:Small spills can be mixed with powdered sodium bicarbonate, lime, or calcium carbonate and swept up.

SECTION 7: Handling and Storage
Store in a tightly sealed container. Keep away from heat and direct sunlight. Prolonged exposure to air may
Handling and Storage:
result in the degradation of the product.

SECTION 8: Exposure Controls and Personal Protection
Eye Protection:Always wear approved safety glasses when handling a chemical substance in the laboratory.
Skin Protection:Wear protective clothing and gloves.
Ventilation:Material may form a fine dust. If possible, handle the material in an efficient fume hood.
If ventilation is not available a respirator should be worn. The use of respirators requires a Respirator
Respirator:
Protection Program to be in compliance with 29 CFR 1910.134.
Ventilation:Material may form a fine dust. If possible, handle the material in an efficient fume hood.
Additional Protection:No additional protection required.

SECTION 9: Physical and Chemical Properties
Color and Form:orange-brown pwdr.
Molecular Weight:716.21
Melting Point:no data
Boiling Point:no data
Vapor Pressure:no data
Specific Gravity:no data
Odor:none
Solubility in Water:insoluble

SECTION 10: Stability and Reactivity
Stability:air sensitive
Hazardous Polymerization:no hazardous polymerization
Conditions to Avoid:prolonged contact with air
Incompatibility:oxidizing agents and halogens
Decomposition Products:carbon dioxide, carbon monoxide, phosphorus pentoxide, hydrofluoric acid, and organic fumes.

SECTION 11: Toxicological Information
RTECS Data:No information available in the RTECS files.
Carcinogenic Effects:no data
Mutagenic Effects:no data
Tetratogenic Effects:no data

SECTION 12: Ecological Information
Ecological Information:No information available

SECTION 13: Disposal Considerations
Disposal:Dispose of according to local, state and federal regulations.

SECTION 14: Transportation
Shipping Name (CFR):Non-hazardous
Hazard Class (CFR):NA
Additional Hazard Class (CFR):NA
Packaging Group (CFR):NA
UN ID Number (CFR):NA
Shipping Name (IATA):Non-hazardous
Hazard Class (IATA):NA
Additional Hazard Class (IATA):NA
Packaging Group (IATA):NA
UN ID Number (IATA):NA

SECTION 15: Regulatory Information
TSCA:Not listed in the TSCA inventory.
SARA (Title 313):Title compound not listed.
Second Ingredient:none


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

Risk Phrases 36/37/38
Safety Phrases 26-36/37/39

 Synonyms

1,1'-Bis(di-i-propylphosphino)ferrocene(1,5-cyclooctadiene)rhodium(I) tetrafluoroborate
1,1'-BIS(DI-ISOPROPYLPHOSPHINO)FERROCENE(1,5-CYCLOOCTADIENE)RHODIUM(I) TETRAFLUOROBORATE
[RH COD DIPFC]BF4
Top Suppliers:I want be here

No recommended suppliers.

Hot Compounds More...
Dichloromethane
CAS#:75-09-2
Polyacrylic acid
CAS#:9003-01-4
sodium carbonate
CAS#:497-19-8
Silicon dioxide
CAS#:7631-86-9
Triethanolamine
CAS#:102-71-6
Demeton
CAS#:126-75-0
Water
CAS#:7732-18-5
4-(4-Piperidinyl)morpholine dihydrochloride
CAS#:53617-35-9
Diclofenac sodium
CAS#:15307-79-6
Budesonide
CAS#:51372-29-3