前往化源商城

品牌现货直购
供应商:我要出现这里



查看所有供应商和价格请点击:

386706-33-8生产厂家

386706-33-8价格

386706-33-8

386706-33-8结构式
386706-33-8结构式

化源商城直购

中文名 [二叔丁基(氯化)膦]二氯化钯(II)二聚体
英文名 [Di-tert-butyl(chloro)phosphine]palladium(II) Dichloride Dimer
英文别名 ditert-butyl(chloro)phosphane,palladium(2+),tetrachloride
[Di-tert-butyl(chloro)phosphine]palladiuM(II) Dichloride DiMer
DICHLORO(CHLORODI-T-BUTYLPHOSPHINE)PALLADIUM(II) DIMER
Bis(2-methyl-2-propanyl)phosphinous chloride - dichloropalladium (1:1)
Dichloro[di-tert-butyl(chloro)phosphine]palladium(II) Dimer
沸点 191.6ºC at 760 mmHg
熔点 222ºC (dec.)
分子式 C16H36Cl6P2Pd2
分子量 715.963
闪点 61.1ºC
精确质量 711.849304
PSA 27.18000
LogP 11.19620
外观性状 固体;Light yellow to Amber to Dark green powder to crystal
储存条件 室温,干燥
[Di-tert-butyl(chloro)phosphine]palladium(II) Dichloride Revision number: 5
Dimer
SAFETY DATA SHEET

Section1. IDENTIFICATION
Product name:[Di-tert-butyl(chloro)phosphine]palladium(II) Dichloride Dimer

Section2. HAZARDS IDENTIFICATION
GHS classification
PHYSICAL HAZARDS
Category 1
Corrosive to metals
HEALTH HAZARDS
Category 1C
Skin corrosion/irritation
Serious eye damage/eye irritationCategory 1
ENVIRONMENTAL HAZARDSNot classified
GHS label elements, including precautionary statements
Pictograms or hazard symbols
Signal wordDanger
May be corrosive to metals
Hazard statements
Causes severe skin burns and eye damage
Precautionary statements:
[Prevention]Keep only in original container.
Do not breathe dust/fume/gas/mist/vapours/spray.
Wash hands thoroughly after handling.
Wear protective gloves/eye protection/face protection.
[Response]IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for
breathing.
IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses,
if present and easy to do. Continue rinsing.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse
skin with water/shower.
Wash contaminated clothing before reuse.
Immediately call a POISON CENTER or doctor/physician.
Absorb spillage to prevent material damage.
[Storage]Store locked up.
[Disposal]Dispose of contents/container through a waste management company authorized by
the local government.
[Di-tert-butyl(chloro)phosphine]palladium(II)
Dichloride Dimer

Section3. COMPOSITION/INFORMATION ON INGREDIENTS
Substance/mixture:Substance
Components:[Di-tert-butyl(chloro)phosphine]palladium(II) Dichloride Dimer
Percent:>97.0%(T)
CAS Number:386706-33-8
Synonyms:Dichloro[di-tert-butyl(chloro)phosphine]palladium(II) Dimer
Chemical Formula:C16H36Cl6P2Pd2

Section4. FIRST AID MEASURES
Inhalation:Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Immediately call a POISON CENTER or doctor/physician.
Skin contact:Remove/Take off immediately all contaminated clothing. Gently wash with plenty of
soap and water. Immediately call a POISON CENTER or doctor/physician.
Eye contact:Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing.Immediately call a POISON CENTER or
doctor/physician.
Ingestion:Immediately call a POISON CENTER or doctor/physician. Rinse mouth. Do NOT
induce vomiting.
A rescuer should wear personal protective equipment, such as rubber gloves and air-
Protection of first-aiders:
tight goggles.

Section5. FIRE-FIGHTING MEASURES
Suitable extinguishingDry chemical, carbon dioxide.
media:
Unsuitable extinguishing Water
media:
Specific hazards arising Take care as it may decompose upon combustion or in high temperatures to
from the chemical:generate poisonous fume.
Precautions for firefighters: Fire-extinguishing work is done from the windward and the suitable fire-extinguishing
method according to the surrounding situation is used. Uninvolved persons should
evacuate to a safe place. In case of fire in the surroundings: Remove movable
containers if safe to do so.
Special protectiveWhen extinguishing fire, be sure to wear personal protective equipment.
equipment for firefighters:

Section6. ACCIDENTAL RELEASE MEASURES
Personal precautions,Use extra personal protective equipment (P3 filter respirator for toxic particles). Keep
protective equipment and people away from and upwind of spill/leak. Entry to non-involved personnel should
emergency procedures: be controlled around the leakage area by roping off, etc.
Environmental precautions: Prevent product from entering drains.
Methods and materials for Sweep dust to collect it into an airtight container, taking care not to disperse it.
containment and cleaning Adhered or collected material should be promptly disposed of, in accordance with
up: appropriate laws and regulations.
Prevention of secondary Do not allow contact with water. Remove all sources of ignition. Fire-extinguishing
hazards:devices should be prepared in case of a fire. Use spark-proof tools and explosion-
proof equipment.

Section7. HANDLING AND STORAGE
Precautions for safe handling
Technical measures:Handling is performed in a well ventilated place. Wear suitable protective equipment.
Prevent dispersion of dust. Wash hands and face thoroughly after handling.
Use a closed system if possible. Use a local exhaust if dust or aerosol will be
generated.
Advice on safe handling:Avoid contact with skin, eyes and clothing.
May develop pressure. Open carefully.
Use corrosive resistant equipment.
[Di-tert-butyl(chloro)phosphine]palladium(II)
Dichloride Dimer

Section7. HANDLING AND STORAGE
Conditions for safe storage, including any
incompatibilities
Storage conditions:Keep container tightly closed. Store in a cool and dark place.
Store locked up.
Store away from incompatible materials such as oxidizing agents.
Packaging material:Comply with laws. Keep only in original container.

Section8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Install a closed system or local exhaust. Also install safety shower and eye bath.
Engineering controls:
Personal protective equipment
Respiratory protection: Dust respirator, self-contained breathing apparatus(SCBA), supplied air respirator,
etc. Use respirators approved under appropriate government standards and follow
local and national regulations.
Hand protection:Impervious gloves.
Safety goggles. A face-shield, if the situation requires.
Eye protection:
Skin and body protection: Impervious protective clothing. Protective boots, if the situation requires.

Section9. PHYSICAL AND CHEMICAL PROPERTIES
Solid
Physical state (20°C):
Form:Crystal- Powder
Colour:Yellow - Deep yellow red
No data available
Odour:
pH: No data available
Melting point/freezing point:222°C (dec.)
Boiling point/range:No data available
No data available
Flash point:
Flammability or explosive
limits:
Lower:No data available
No data available
Upper:
Relative density:No data available
Solubility(ies):
[Water]No data available
No data available
[Other solvents]

Section10. STABILITY AND REACTIVITY
Chemical stability:Stable under proper conditions.
Possibility of hazardous Decomposes in contact with water and liberates toxic gases.
reactions:
Conditions to avoid:Moisture
Incompatible materials: Oxidizing agents, Bases, Water
Hazardous decomposition Carbon monoxide, Carbon dioxide, Phosphorus oxides, Hydrogen chloride
products:

Section11. TOXICOLOGICAL INFORMATION
Acute Toxicity:No data available
Skin corrosion/irritation: No data available
Serious eyeNo data available
damage/irritation:
Germ cell mutagenicity: No data available
Carcinogenicity:
IARC =No data available
No data available
NTP =
Reproductive toxicity:No data available
[Di-tert-butyl(chloro)phosphine]palladium(II)
Dichloride Dimer

Section12. ECOLOGICAL INFORMATION
Ecotoxicity:
Fish:No data available
Crustacea:No data available
Algae:No data available
Persistence / degradability: No data available
BioaccumulativeNo data available
potential(BCF):
Mobility in soil
Log Pow:No data available
Soil adsorption (Koc):No data available
Henry's LawNo data available
constant(PaM3/mol):

Section13. DISPOSAL CONSIDERATIONS
Recycle to process, if possible. Consult your local regional authorities. You may be able to dissolve or mix material
with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber system.
Observe all federal, state and local regulations when disposing of the substance.

Section14. TRANSPORT INFORMATION
Hazards Class:8: Corrosive.
UN-No:3265
Proper shipping name:Corrosive liquid, acidic, organic, n.o.s.
Packing group:III

Section15. REGULATORY INFORMATION
Safe management ordinance of dangerous chemical product (State Council announces on January 26, 2002
and revised on February 16,2011): Safe use and production, the storage of a dangerous chemical, transport,
loading and unloading were prescribed.


SECTION 16 - ADDITIONAL INFORMATION
N/A
危害码 (欧洲) C
危险品运输编码 3261.0
危险类别 8.0