696-30-0

• 常用中文名：4-异丙基吡啶
• 常用英文名：4-Isopropylpyridine
• CAS号：696-30-0
• 分子式：C₈H₁₁N
• 分子量：121.180
• 发布时间：2018-09-25 11:37:12
• 更新时间：2024-01-08 10:59:01

名称

• 中文名: 4-异丙基吡啶
• 英文名: 4-Isopropylpyridine
• 英文别名: Pyridine, 4-(1-methylethyl)-; MFCD00039719; 4-(1-Methylethyl)pyridine; 4-Isopropylpyridine; EINECS 211-794-5; 4-propan-2-ylpyridine; 4-(propan-2-yl)pyridine; 4-(Propan-2-yl)pyridin

物化性质

• 密度: 0.9±0.1 g/cm3
• 沸点: 177.1±9.0 °C at 760 mmHg
• 分子式: C₈H₁₁N
• 分子量: 121.180
• 闪点: 54.8±11.4 °C
• 精确质量: 121.089149
• PSA: 12.89000
• LogP: 2.07
• 外观性状: 无色-极淡的黄色透明液体
• 蒸汽压: 1.4±0.3 mmHg at 25°C
• 折射率: 1.492
• 储存条件:

  存放在密封容器内，并放在阴凉，干燥处。储存的地方必须远离氧化剂。远离火源。

• 稳定性:

  远离氧化物，火源。

• 分子结构:

  1、 摩尔折射率：38.52

  2、 摩尔体积（m³/mol）：132.7

  3、 等张比容（90.2K）：316.4

  4、 表面张力（dyne/cm）：32.3

  5、 介电常数：

  6、 偶极距（10 ^-24cm ³）：

  7、 极化率：15.27

• 计算化学:

  1.疏水参数计算参考值（XlogP）:无

  2.氢键供体数量:0

  3.氢键受体数量:1

  4.可旋转化学键数量:1

  5.互变异构体数量:无

  6.拓扑分子极性表面积12.9

  7.重原子数量:9

  8.表面电荷:0

  9.复杂度:72.6

  10.同位素原子数量:0

  11.确定原子立构中心数量:0

  12.不确定原子立构中心数量:0

  13.确定化学键立构中心数量:0

  14.不确定化学键立构中心数量:0

  15.共价键单元数量:1

• 更多:

  1. 性状：无色透明液体。

  2. 密度（g/mL,25/4℃）：0.93

  3. 相对蒸汽密度（g/mL,空气=1）：未确定

  4. 熔点（ºC）：未确定

  5. 沸点（ºC,常压）：178

  6. 沸点（ºC,5.2kPa）：未确定

  7. 折射率：未确定

  8. 闪点（ºC）：66

  9. 比旋光度（º）：未确定

  10. 自燃点或引燃温度（ºC）：未确定

  11. 蒸气压（kPa,25ºC）：未确定

  12. 饱和蒸气压（kPa,60ºC）：未确定

  13. 燃烧热（KJ/mol）：未确定

  14. 临界温度（ºC）：未确定

  15. 临界压力（KPa）：未确定

  16. 油水（辛醇/水）分配系数的对数值：未确定

  17. 爆炸上限（%,V/V）：未确定

  18. 爆炸下限（%,V/V）：未确定

  19. 溶解性：未确定 。

MSDS

4-Isopropylpyridine Revision number: 5 SAFETY DATA SHEET Section1. IDENTIFICATION Product name:4-Isopropylpyridine Revision number:5 Section2. HAZARDS IDENTIFICATION GHS classification PHYSICAL HAZARDS Category 4 Flammable liquids HEALTH HAZARDS Category 2 Skin corrosion/irritation Serious eye damage/eye irritationCategory 2A Not classified ENVIRONMENTAL HAZARDS GHS label elements, including precautionary statements Pictograms or hazard symbols Signal wordWarning Hazard statementsCombustible liquid Causes skin irritation Causes serious eye irritation Precautionary statements: Keep away from flames and hot surfaces. [Prevention] Wash hands thoroughly after handling. Wear protective gloves and eye/face protection. [Response]IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. IF ON SKIN: Gently wash with plenty of soap and water. If skin irritation occurs: Get medical advice/attention. Take off contaminated clothing and wash before reuse. [Storage]Store in a well-ventilated place. Keep cool. [Disposal]Dispose of contents/container through a waste management company authorized by the local government. Section3. COMPOSITION/INFORMATION ON INGREDIENTS Substance/mixture:Substance Components:4-Isopropylpyridine Percent:>98.0%(GC)(T) 696-30-0 CAS Number: Chemical Formula:C8H11N 4-Isopropylpyridine Section4. FIRST AID MEASURES Inhalation:Remove victim to fresh air and keep at rest in a position comfortable for breathing. Get medical advice/attention if you feel unwell. Skin contact:Remove/Take off immediately all contaminated clothing. Gently wash with plenty of soap and water. If skin irritation or rash occurs: Get medical advice/attention. Eye contact:Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. Ingestion:Get medical advice/attention if you feel unwell. Rinse mouth. Protection of first-aiders:A rescuer should wear personal protective equipment, such as rubber gloves and air- tight goggles. Section5. FIRE-FIGHTING MEASURES Suitable extinguishingDry chemical, foam, carbon dioxide. media: Unsuitable extinguishing Water (It may scatter and spread fire.) media: Specific hazards arising Take care as it may decompose upon combustion or in high temperatures to from the chemical:generate poisonous fume. Precautions for firefighters: Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place. In case of fire in the surroundings: Remove movable containers if safe to do so. When extinguishing fire, be sure to wear personal protective equipment. Special protective equipment for firefighters: Section6. ACCIDENTAL RELEASE MEASURES Use personal protective equipment. Keep people away from and upwind of spill/leak. Personal precautions, protective equipment and Ensure adequate ventilation. Entry to non-involved personnel should be controlled emergency procedures: around the leakage area by roping off, etc. Environmental precautions: Prevent product from entering drains. Methods and materials for Absorb spilled material in a suitable absorbent (e.g. rag, dry sand, earth, saw-dust). containment and cleaning In case of large amount of spillage, contain a spill by bunding. Adhered or collected up: material should be promptly disposed of, in accordance with appropriate laws and regulations. Prevention of secondary Remove all sources of ignition. Fire-extinguishing devices should be prepared in hazards:case of a fire. Use spark-proof tools and explosion-proof equipment. Section7. HANDLING AND STORAGE Precautions for safe handling Technical measures:Handling is performed in a well ventilated place. Wear suitable protective equipment. Prevent generation of vapour or mist. Keep away from flames and hot surfaces. Take measures to prevent the build up of electrostatic charge. Use explosion-proof equipment. Wash hands and face thoroughly after handling. Use a closed system, ventilation. Advice on safe handling: Avoid contact with skin, eyes and clothing. Conditions for safe storage, including any incompatibilities Keep container tightly closed. Store in a cool, dark and well-ventilated place. Storage conditions: Store under inert gas. Store away from incompatible materials such as oxidizing agents. Air-sensitive Comply with laws. Packaging material: 4-Isopropylpyridine Section8. EXPOSURE CONTROLS / PERSONAL PROTECTION Engineering controls:Install a closed system or local exhaust as possible so that workers should not be exposed directly. Also install safety shower and eye bath. Personal protective equipment Respiratory protection: Vapor respirator. Follow local and national regulations. Hand protection:Protective gloves. Safety glasses. A face-shield, if the situation requires. Eye protection: Skin and body protection: Protective clothing. Protective boots, if the situation requires. Section9. PHYSICAL AND CHEMICAL PROPERTIES Physical state (20°C):Liquid Clear Form: Colour:Colorless - Very pale yellow No data available Odour: pH: No data available Melting point/freezing point:No data available Boiling point/range:178°C Flash point:66°C Flammability or explosive limits: Lower:No data available Upper:No data available Relative density:0.93 Solubility(ies): [Water]No data available No data available [Other solvents] Section10. STABILITY AND REACTIVITY Chemical stability:Stable under proper conditions. Possibility of hazardous No special reactivity has been reported. reactions: Conditions to avoid:Open flame Incompatible materials: Oxidizing agents Hazardous decomposition Carbon monoxide, Carbon dioxide, Nitrogen oxides (NOx) products: Section11. TOXICOLOGICAL INFORMATION Acute Toxicity:No data available Skin corrosion/irritation: No data available Serious eyeNo data available damage/irritation: Germ cell mutagenicity: No data available Carcinogenicity: IARC =No data available No data available NTP = Reproductive toxicity:No data available Section12. ECOLOGICAL INFORMATION Ecotoxicity: Fish:No data available Crustacea:No data available Algae:No data available Persistence / degradability: No data available No data available Bioaccumulative potential(BCF): Mobility in soil Log Pow:No data available 4-Isopropylpyridine Section12. ECOLOGICAL INFORMATION Soil adsorption (Koc): No data available Henry's LawNo data available constant(PaM3/mol): Section13. DISPOSAL CONSIDERATIONS Recycle to process, if possible. Consult your local regional authorities. You may be able to burn in a chemical incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local regulations when disposing of the substance. Section14. TRANSPORT INFORMATION Does not correspond to the classification standard of the United Nations Hazards Class: UN-No:Not listed Section15. REGULATORY INFORMATION Safe management ordinance of dangerous chemical product (State Council announces on January 26, 2002 and revised on February 16,2011): Safe use and production, the storage of a dangerous chemical, transport, loading and unloading were prescribed. SECTION 16 - ADDITIONAL INFORMATION N/A

毒性和生态

生态学数据: 通常对水是不危害的，若无政府许可，勿将材料排入周围环境。

安全

• 风险声明 (欧洲): 20/21/22-36/37/38
• 安全声明 (欧洲): S26-S36/37/39
• 海关编码: 2933399090

上下游产品

上游产品  9
17755-30-5 455258-20-5 536-75-4 108-89-4
15031-78-4 110-86-1 30615-19-1 26903-66-2
75-30-9
下游产品  10
108-89-4 536-75-4 17755-30-5 187737-37-7
3978-81-2 22581-87-9 19678-58-1 83282-36-4
55-22-1 34995-28-3

海关

海关编码	2933399090
中文概述	2933399090. 其他结构含非稠合吡啶环的化合物. 增值税率:17.0%. 退税率:13.0%. 监管条件:无. 最惠国关税:6.5%. 普通关税:20.0%
申报要素	品名, 成分含量, 用途, 乌洛托品请注明外观, 6－己内酰胺请注明外观, 签约日期
Summary	2933399090. other compounds containing an unfused pyridine ring (whether or not hydrogenated) in the structure. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:6.5%. General tariff:20.0%