Top Suppliers:I want be here


177911-87-4

177911-87-4 structure
177911-87-4 structure
  • Name: 2-(Aminomethyl)-1-N-Boc-pyrrolidine
  • Chemical Name: tert-butyl 2-(aminomethyl)pyrrolidine-1-carboxylate
  • CAS Number: 177911-87-4
  • Molecular Formula: C10H20N2O2
  • Molecular Weight: 200.278
  • Create Date: 2018-04-24 08:00:00
  • Modify Date: 2024-01-10 22:47:39

Name tert-butyl 2-(aminomethyl)pyrrolidine-1-carboxylate
Synonyms tert-Butyl-2-(aminomethyl)pyrrolidine-1-carboxylate
(R)-2-(aminomethyl)-pyrrolidine-l-carboxylic acid tert-butyl ester
(+/-)-2-(Aminomethyl)-1-N-Boc-pyrrolidine
1-n-boc-2-(aminomethyl)pyrrolidine
MFCD01317793
1-Boc-2-Aminomethyl-Pyrrolidine
1-Boc-2-(Aminomethyl)pyrrolidine
[1-(tert-butoxycarbonyl)-2-pyrrolidinyl]methylamine
N-t-butoxycarbonyl-2(S)-aminomethylpyrrolidine
tert-butyl 2-(aminomethyl)-1-pyrrolidinecarboxylate
(+/-)-2-(Aminomethyl)-1-Boc-pyrrolidine
1-Boc-2-(aminomethyl)-pyrrolidine
2-(3-BUTOXYPHENYL)-8-CHLOROQUINOLINE-4-CARBOXYLICACID
(S)-tert-Butyl 2-(aminomethyl)pyrrolidine-1-carboxylate
2-Methyl-2-propanyl 2-(aminomethyl)-1-pyrrolidinecarboxylate
tert-Butyl 2-(aminomethyl)pyrrolidine-1-carboxylate
2-aminomethyl-pyrrolidine-1-carboxylic acid tert-butyl ester
Density 1.0±0.1 g/cm3
Boiling Point 280.3±13.0 °C at 760 mmHg
Molecular Formula C10H20N2O2
Molecular Weight 200.278
Flash Point 123.3±19.8 °C
Exact Mass 200.152481
PSA 55.56000
LogP 0.51
Vapour Pressure 0.0±0.6 mmHg at 25°C
Index of Refraction 1.486
Storage condition 2-8°C

Section1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE
Product identifiers
Product name: 1-Boc-2-(aminomethyl)pyrrolidine
CAS-No.: 177911-87-4
Relevant identified uses of the substance or mixture and uses advised against
Identified uses: Laboratory chemicals, Manufacture of substances



Section2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP]
Acute toxicity, Oral (Category 4)
Classification according to EU Directives 67/548/EEC or 1999/45/EC
Harmful if swallowed.
Label elements
Labelling according Regulation (EC) No 1272/2008 [CLP]
Pictogram
Signal wordWarning
Hazard statement(s)
H302Harmful if swallowed.
Precautionary statement(s) none
Supplemental Hazardnone
Statements
According to European Directive 67/548/EEC as amended.
Hazard symbol(s)
R-phrase(s)
R22Harmful if swallowed.
S-phrase(s)none
Other hazards - none

Section3. COMPOSITION/INFORMATION ON INGREDIENTS
Substances
Formula: C10H20N2O2
Molecular Weight: 200,28 g/mol
ComponentConcentration
1-Boc-2-(aminomethyl)pyrrolidine
CAS-No.177911-87-4-

Section4. FIRST AID MEASURES
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly
investigated.
Indication of any immediate medical attention and special treatment needed
no data available

Section5. FIRE-FIGHTING MEASURES
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
no data available
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available

Section6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid breathing vapors, mist or gas. Ensure adequate ventilation.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Soak up with inert absorbent material and dispose of as hazardous waste. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.

Section7. HANDLING AND STORAGE
Precautions for safe handling
Avoid contact with skin and eyes. Avoid inhalation of vapour or mist.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Recommended storage temperature: 2 - 8 °C
Handle under nitrogen, protect from moisture. Store under nitrogen.
Specific end uses
no data available

Section8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at
the end of workday.
Personal protective equipment
Eye/face protection
Face shield and safety glasses Use equipment for eye protection tested and approved under
appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the
standard EN 374 derived from it.
Body Protection
Complete suit protecting against chemicals, The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with
multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to
engineering controls. If the respirator is the sole means of protection, use a full-face supplied air
respirator. Use respirators and components tested and approved under appropriate government
standards such as NIOSH (US) or CEN (EU).

Section9. PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
a) AppearanceForm: liquid
b) Odourno data available
c) Odour Thresholdno data available
d) pHno data available
e) Melting point/freezingno data available
point
f) Initial boiling point and no data available
boiling range
g) Flash point> 110 °C
h) Evaporation rateno data available
i) Flammability (solid, gas) no data available
j) Upper/lowerno data available
flammability or
explosive limits
k) Vapour pressureno data available
l) Vapour density6,91 - (Air = 1.0)
m) Relative density1,014 g/cm3
n) Water solubilityno data available
o) Partition coefficient: n- log Pow: 1,247
octanol/water
p) Autoignitionno data available
temperature
q) Decompositionno data available
temperature
r) Viscosityno data available
s) Explosive propertiesno data available
t) Oxidizing propertiesno data available
Other safety information
no data available

Section10. STABILITY AND REACTIVITY
Reactivity
no data available
Chemical stability
no data available
Possibility of hazardous reactions
no data available
Conditions to avoid
no data available
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
Other decomposition products - no data available

Section11. TOXICOLOGICAL INFORMATION
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC:No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Potential health effects
InhalationMay be harmful if inhaled. May cause respiratory tract irritation.
IngestionHarmful if swallowed.
SkinMay be harmful if absorbed through skin. May cause skin irritation.
EyesCauses eye irritation.
Signs and Symptoms of Exposure
To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly
investigated.
Additional Information
RTECS: Not available

Section12. ECOLOGICAL INFORMATION
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
no data available
Other adverse effects
no data available

Section13. DISPOSAL CONSIDERATIONS
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company.
Contaminated packaging
Dispose of as unused product.

Section14. TRANSPORT INFORMATION
UN number
ADR/RID: -IMDG: -IATA: -
UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA:Not dangerous goods
Transport hazard class(es)
ADR/RID: -IMDG: -IATA: -
Packaging group
ADR/RID: -IMDG: -IATA: -
Environmental hazards
ADR/RID: noIMDG Marine pollutant: noIATA: no
Special precautions for user
no data available



SECTION 15 - REGULATORY INFORMATION
N/A


SECTION 16 - ADDITIONAL INFORMATION
N/A
Symbol GHS07
GHS07
Signal Word Warning
Hazard Statements H302
Hazard Codes Xn
Risk Phrases R36/37/38
Safety Phrases S26
RIDADR NONH for all modes of transport
HS Code 2933990090
Precursor  0

DownStream  1

HS Code 2933990090
Summary 2933990090. heterocyclic compounds with nitrogen hetero-atom(s) only. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:6.5%. General tariff:20.0%