62337-00-2

62337-00-2 structure
62337-00-2 structure
  • Name: Arsenazo Iii Disodium Salt
  • Chemical Name: Arsenazo Iii Disodium Salt
  • CAS Number: 62337-00-2
  • Molecular Formula: C22H16As2N4Na2O14S2
  • Molecular Weight: 820.33400
  • Create Date: 2018-06-25 17:21:33
  • Modify Date: 2025-08-25 19:36:50

Name Arsenazo Iii Disodium Salt
Synonyms MFCD00003936
arsenazo iii disodium salt
EINECS 263-516-7
Melting Point >320ºC(lit.)
Molecular Formula C22H16As2N4Na2O14S2
Molecular Weight 820.33400
Exact Mass 819.83300
PSA 336.12000
LogP 2.17360
Name: Arsenazo III (disodium salt) Material Safety Data Sheet
Synonym: 2,7-Bis(2-arsenophenylazo)-1,8-dihydroxynaphtalene-3,6-disulfonic acid; disodium sal
CAS: 62337-00-2
Section 1 - Chemical Product MSDS Name:Arsenazo III (disodium salt) Material Safety Data Sheet
Synonym:2,7-Bis(2-arsenophenylazo)-1,8-dihydroxynaphtalene-3,6-disulfonic acid; disodium sal

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
62337-00-2 Arsenazo III (disodium salt) 100.0 263-516-7
Hazard Symbols: T
Risk Phrases: 23/25

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Toxic by inhalation and if swallowed.The toxicological properties of this material have not been fully investigated.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
Harmful if swallowed. May cause irritation of the digestive tract.
The toxicological properties of this substance have not been fully investigated.
Inhalation:
Harmful if inhaled. May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated.
Chronic:
Inorganic arsenic compounds may cause skin and lung cancers in humans.

Section 4 - FIRST AID MEASURES
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh air immediately. If breathing is difficult, give oxygen. Do NOT use mouth-to-mouth resuscitation. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
Notes to Physician:

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry chemical, carbon dioxide, or appropriate foam.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective Equipment section. Sweep up, then place into a suitable container for disposal. Avoid generating dusty conditions. Provide ventilation.

Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use only in a well-ventilated area. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Do not ingest or inhale.
Storage:
Keep container closed when not in use. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 62337-00-2: United Kingdom, WEL - TWA: (listed as arsenic compounds, n.o.s.): mg/m3 TWA (except arsine, as As) United Kingdom, WEL - STEL: (listed as arsenic compounds, n.o.s.) 0.3 mg/m3 STEL (except arsine, as As) United States OSHA: 0.5 mg/m3 TWA (listed under Arsenic).
Belgium - TWA: (listed as arsenic): 0.01 mg/m3 VLE Japan: (listed as arsenic compounds, n.o.s.): 3 g/m3 OEL (refere value, as As) Malaysia: (listed as arsenic): 0.01 mg/m3 TWA Netherlands: (listed as arsenic): 0.050 mg/m3 MAC Spain: (listed as arsenic compounds, n.o.s.): 0.1 mg/m3 VLA-ED (a As) Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Powder
Color: black to dark-purple
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: insoluble in concentrated acids
Specific Gravity/Density:
Molecular Formula: C22H16As2Na2N4O14S2
Molecular Weight: 820.33

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, oxides of sulfur, irritating and toxic fumes and gases, carbon dioxide, nitrogen, oxides of arsenic.
Hazardous Polymerization: Will not occur.

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 62337-00-2 unlisted.
LD50/LC50:
Not available.
The toxicity of this product is partially based on the hazards associated with Arsenic (CAS#: Carcinogenicity:
Arsenazo III (disodium salt) - IARC: Group 1 carcinogen (listed as Arsenic).

Section 12 - ECOLOGICAL INFORMATION


Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

IATA
Shipping Name: ORGANOARSENIC COMPOUND, N.O.S.*
Hazard Class: 6.1
UN Number: 3280
Packing Group: II
IMO
Shipping Name: ORGANOARSENIC COMPOUND, N.O.S.
Hazard Class: 6.1
UN Number: 3280
Packing Group: II
RID/ADR
Shipping Name: ORGANOARSENIC COMPOUND, N.O.S.
Hazard Class: 6.1
UN Number: 3280
Packing group: II

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T
Risk Phrases:
R 23/25 Toxic by inhalation and if swallowed.
Safety Phrases:
S 20/21 When using do not eat, drink or smoke.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 62337-00-2: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 62337-00-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 62337-00-2 is not listed on the TSCA inventory.
It is for research and development use only.


SECTION 16 - ADDITIONAL INFORMATION
N/A
Hazard Codes T,N
Risk Phrases 23/25-50/53
Safety Phrases 20/21-28-45-60-61
RIDADR UN 3465 6.1/PG 2
Packaging Group II
Hazard Class 6.1
The content on this webpage is sourced from various professional data sources. If you have any questions or concerns regarding the content, please feel free to contact service1@chemsrc.com.