29739-88-6

29739-88-6 structure
29739-88-6 structure
  • Name: N-(p-Tosyl)-L-phenylalaninyl chloride
  • Chemical Name: (2S)-2-[(4-methylphenyl)sulfonylamino]-3-phenylpropanoyl chloride
  • CAS Number: 29739-88-6
  • Molecular Formula: C16H16ClNO3S
  • Molecular Weight: 337.82100
  • Create Date: 2018-12-22 14:36:28
  • Modify Date: 2024-01-07 23:09:34

Name (2S)-2-[(4-methylphenyl)sulfonylamino]-3-phenylpropanoyl chloride
Synonyms (S)-3-phenyl-2-(toluene-4-sulfonylamino)propionyl chloride
N-p-toluenesulphonyl-L-phenylalanyl chloride
(S)-2-(4-methylphenylsulfonamido)-3-phenylpropanoyl chloride
N-(p-toluenesulfonyl)-S-phenylalanine chloride
Tosyl-L-phenylalanyl Chloride
MFCD00191583
(S)-N-(p-tosyl)phenylalaninyl chloride
3-phenyl-2-(toluene-4-sulfonylamino)-propionyl chloride
N-p-Tosyl-L-phenylalaninyl chloride
N-(p-toluenesulfonyl)-L-phenylalanyl chloride
Density 1.304g/cm3
Boiling Point 492.1ºC at 760 mmHg
Melting Point 132 °C (dec.)(lit.)
Molecular Formula C16H16ClNO3S
Molecular Weight 337.82100
Flash Point 251.4ºC
Exact Mass 337.05400
PSA 71.62000
LogP 4.12170
Vapour Pressure 7.91E-10mmHg at 25°C
Index of Refraction 10 ° (C=3, CHCl3)
N-(p-Toluenesulfonyl)-L-phenylalanyl Chloride [Optical Revision number: 5
Resolving Reagent for Alcohols]
SAFETY DATA SHEET

Section1. IDENTIFICATION
Product name:N-(p-Toluenesulfonyl)-L-phenylalanyl Chloride [Optical Resolving Reagent for
Alcohols]

Revision number:5

Section2. HAZARDS IDENTIFICATION
GHS classification
PHYSICAL HAZARDS
Corrosive to metalsCategory 1
HEALTH HAZARDS
Skin corrosion/irritationCategory 1B
Serious eye damage/eye irritationCategory 1
ENVIRONMENTAL HAZARDSNot classified
GHS label elements, including precautionary statements
Pictograms or hazard symbols
Danger
Signal word
Hazard statementsMay be corrosive to metals
Causes severe skin burns and eye damage
Precautionary statements:
Keep only in original container.
[Prevention]
Do not breathe dust/fume/gas/mist/vapours/spray.
Wash hands thoroughly after handling.
Wear protective gloves/eye protection/face protection.
[Response]IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for
breathing.
IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses,
if present and easy to do. Continue rinsing.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse
skin with water/shower.
Wash contaminated clothing before reuse.
Immediately call a POISON CENTER or doctor/physician.
Absorb spillage to prevent material damage.
[Storage]Store locked up.
Dispose of contents/container through a waste management company authorized by
[Disposal]
the local government.
[Optical Resolving Reagent for Alcohols]

Section3. COMPOSITION/INFORMATION ON INGREDIENTS
Substance/mixture:Substance
Components:N-(p-Toluenesulfonyl)-L-phenylalanyl Chloride [Optical Resolving Reagent for
Alcohols]
Percent:>97.0%(T)
CAS Number:29739-88-6
Synonyms:Tosyl-L-phenylalanyl Chloride
Chemical Formula:C16H16ClNO3S

Section4. FIRST AID MEASURES
Inhalation:Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Immediately call a POISON CENTER or doctor/physician.
Skin contact:Remove/Take off immediately all contaminated clothing. Gently wash with plenty of
soap and water. Immediately call a POISON CENTER or doctor/physician.
Eye contact:Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing.Immediately call a POISON CENTER or
doctor/physician.
Ingestion:Immediately call a POISON CENTER or doctor/physician. Rinse mouth. Do NOT
induce vomiting.
Protection of first-aiders:A rescuer should wear personal protective equipment, such as rubber gloves and air-
tight goggles.

Section5. FIRE-FIGHTING MEASURES
Suitable extinguishingDry chemical, carbon dioxide.
media:
Unsuitable extinguishing Water
media:
Specific hazards arising Take care as it may decompose upon combustion or in high temperatures to
from the chemical:generate poisonous fume.
Precautions for firefighters: Fire-extinguishing work is done from the windward and the suitable fire-extinguishing
method according to the surrounding situation is used. Uninvolved persons should
evacuate to a safe place. In case of fire in the surroundings: Remove movable
containers if safe to do so.
When extinguishing fire, be sure to wear personal protective equipment.
Special protective
equipment for firefighters:

Section6. ACCIDENTAL RELEASE MEASURES
Personal precautions,Use extra personal protective equipment (P3 filter respirator for toxic particles). Keep
protective equipment and people away from and upwind of spill/leak. Entry to non-involved personnel should
emergency procedures: be controlled around the leakage area by roping off, etc.
Environmental precautions: Prevent product from entering drains.
Methods and materials for Sweep dust to collect it into an airtight container, taking care not to disperse it.
containment and cleaning Adhered or collected material should be promptly disposed of, in accordance with
up: appropriate laws and regulations.
Prevention of secondary Do not allow contact with water. Remove all sources of ignition. Fire-extinguishing
hazards:devices should be prepared in case of a fire. Use spark-proof tools and explosion-
proof equipment.

Section7. HANDLING AND STORAGE
Precautions for safe handling
Handling is performed in a well ventilated place. Wear suitable protective equipment.
Technical measures:
Prevent dispersion of dust. Wash hands and face thoroughly after handling.
Use a closed system if possible. Use a local exhaust if dust or aerosol will be
generated.
Avoid contact with skin, eyes and clothing.
Advice on safe handling:
[Optical Resolving Reagent for Alcohols]

Section7. HANDLING AND STORAGE
May develop pressure. Open carefully.
Use corrosive resistant equipment.
Conditions for safe storage, including any
incompatibilities
Storage conditions:Keep container tightly closed. Store in a cool and dark place.
Store under inert gas.
Protect from moisture.
Store locked up.
Store away from incompatible materials such as oxidizing agents.
Moisture-sensitive
Packaging material:Comply with laws. Keep only in original container.

Section8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering controls:Install a closed system or local exhaust. Also install safety shower and eye bath.
Personal protective equipment
Respiratory protection: Dust respirator, self-contained breathing apparatus(SCBA), supplied air respirator,
etc. Use respirators approved under appropriate government standards and follow
local and national regulations.
Impervious gloves.
Hand protection:
Eye protection:Safety goggles. A face-shield, if the situation requires.
Skin and body protection: Impervious protective clothing. Protective boots, if the situation requires.

Section9. PHYSICAL AND CHEMICAL PROPERTIES
Physical state (20°C):Solid
Form:Crystal- Powder
White - Pale yellow
Colour:
Odour:No data available
pH: No data available
Melting point/freezing point:132°C (dec.)
No data available
Boiling point/range:
Flash point:No data available
Flammability or explosive
limits:
Lower:No data available
Upper:No data available
Relative density:No data available
Solubility(ies):
No data available
[Water]
[Other solvents]No data available

Section10. STABILITY AND REACTIVITY
Chemical stability:Stable under proper conditions.
Possibility of hazardous Decomposes in contact with water and liberates toxic gases.
reactions:
Conditions to avoid:Moisture
Incompatible materials: Oxidizing agents
Hazardous decomposition Carbon monoxide, Carbon dioxide, Nitrogen oxides (NOx), Sulfur oxides, Hydrogen
products:chloride

Section11. TOXICOLOGICAL INFORMATION
No data available
Acute Toxicity:
Skin corrosion/irritation: No data available
Serious eyeNo data available
damage/irritation:
Germ cell mutagenicity: No data available
Carcinogenicity:
[Optical Resolving Reagent for Alcohols]

Section11. TOXICOLOGICAL INFORMATION
IARC =No data available
NTP =No data available
Reproductive toxicity:No data available

Section12. ECOLOGICAL INFORMATION
Ecotoxicity:
No data available
Fish:
Crustacea:No data available
No data available
Algae:
Persistence / degradability: No data available
No data available
Bioaccumulative
potential(BCF):
Mobility in soil
Log Pow:No data available
No data available
Soil adsorption (Koc):
Henry's LawNo data available
constant(PaM3/mol):

Section13. DISPOSAL CONSIDERATIONS
Recycle to process, if possible. Consult your local regional authorities. You may be able to dissolve or mix material
with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber system.
Observe all federal, state and local regulations when disposing of the substance.

Section14. TRANSPORT INFORMATION
Hazards Class:8: Corrosive.
3261
UN-No:
Proper shipping name:Corrosive solid, acidic, organic, n.o.s.
II
Packing group:

Section15. REGULATORY INFORMATION
Safe management ordinance of dangerous chemical product (State Council announces on January 26, 2002
and revised on February 16,2011): Safe use and production, the storage of a dangerous chemical, transport,
loading and unloading were prescribed.


SECTION 16 - ADDITIONAL INFORMATION
N/A
Hazard Codes C: Corrosive;
Risk Phrases R34
Safety Phrases S22-S26-S27-S36/37/39-S45
RIDADR UN 3261 8/PG 2
WGK Germany 3
Packaging Group III
Hazard Class 8
HS Code 2935009090
HS Code 2935009090
Summary 2935009090 other sulphonamides VAT:17.0% Tax rebate rate:9.0% Supervision conditions:none MFN tariff:6.5% General tariff:35.0%