Top Suppliers:I want be here

201849-15-2

201849-15-2 structure
201849-15-2 structure

Name 2-Bromo-1-chloro-4-fluorobenzene
Synonyms GR DF BE
3-bromo-4-chlorofluorobenzene
2-Bromo-1-chloro-4-fluorobenzene
MFCD00061120
2-Chloro-5-fluorobromobenzene
1-bromo-2-chloro-5-fluorobenzene
Benzene, 2-bromo-1-chloro-4-fluoro-
Density 1.7±0.1 g/cm3
Boiling Point 202.1±20.0 °C at 760 mmHg
Molecular Formula C6H3BrClF
Molecular Weight 209.443
Flash Point 76.0±21.8 °C
Exact Mass 207.909058
LogP 3.49
Vapour Pressure 0.4±0.4 mmHg at 25°C
Index of Refraction 1.551
Storage condition Room temperature.
2-Bromo-1-chloro-4-fluorobenzene Revision number: 1
SAFETY DATA SHEET

Section1. BASE INFORMATION
Product name:2-Bromo-1-chloro-4-fluorobenzene

Revision number:1

Section2. HAZARDS IDENTIFICATION
Classification of the GHS
PHYSICAL HAZARDS
Flammable liquidsCategory 4
HEALTH HAZARDS
Skin corrosion/irritationCategory 2
Not classified
ENVIRONMENTAL HAZARDS
GHS label elements
Pictograms or hazard symbols
Signal wordWarning
Hazard statementCombustible liquid
Causes skin irritation
Precautionary statements
[Prevention]Keep away from flames and hot surfaces.
Wash hands thoroughly after handling.
Wear protective gloves and eye/face protection.
IF ON SKIN: Gently wash with plenty of soap and water.
[Response]
If skin irritation occurs: Get medical advice/attention.
Take off contaminated clothing and wash before reuse.
[Storage]Store in a well-ventilated place. Keep cool.
Dispose of contents/container through a waste management company authorized by
[Disposal]
the local government

Section3. COMPOSITION/INFORMATION ON INGREDIENTS
Substance/mixture:Substance
Component(s):2-Bromo-1-chloro-4-fluorobenzene
Percent:>98.0%(GC)
CAS Number:201849-15-2
Chemical Formula:C6H3BrClF

Section4. FIRST AID MEASURES
Inhalation:Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Get medical advice/attention if you feel unwell.
2-Bromo-1-chloro-4-fluorobenzene

Section4. FIRST AID MEASURES
Skin contact:Remove/Take off immediately all contaminated clothing. Gently wash with plenty of
soap and water. If skin irritation or rash occurs: Get medical advice/attention.
Eye contact:Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing. If eye irritation persists: Get medical
advice/attention.
Ingestion:Get medical advice/attention if you feel unwell. Rinse mouth.
A rescuer should wear personal protective equipment, such as rubber gloves and air-
Protection of first-aiders:
tight goggles.

Section5. FIRE-FIGHTING MEASURES
Suitable extinguishingDry chemical, foam, water spray, carbon dioxide.
media:
Extinguishing media not to Solid streams of water
be used:
Specific hazards:Take care as it may decompose upon combustion or in high temperatures to
generate poisonous fume.
Specific methods:Fire-extinguishing work is done from the windward and the suitable fire-extinguishing
method according to the surrounding situation is used. Uninvolved persons should
evacuate to a safe place. In case of fire in the surroundings: Remove movable
containers if safe to do so.
Special protectiveWhen extinguishing fire, be sure to wear personal protective equipment.
equipment for firefighters:

Section6. ACCIDENTAL RELEASE MEASURES
Personal precautions,Use personal protective equipment. Keep people away from and upwind of spill/leak.
protective equipment and Ensure adequate ventilation. Entry to non-involved personnel should be controlled
emergency procedures: around the leakage area by roping off, etc.
Environmental precautions: Prevent product from entering drains.
Methods and materials for Absorb spilled material in a suitable absorbent (e.g. rag, dry sand, earth, saw-dust).
containment and cleaning In case of large amount of spillage, contain a spill by bunding. Adhered or collected
up: material should be promptly disposed of, in accordance with appropriate laws and
regulations.
Prevention of secondary Remove all sources of ignition. Fire-extinguishing devices should be prepared in
hazards:case of a fire. Use spark-proof tools and explosion-proof equipment.

Section7. HANDLING AND STORAGE
Handling
Technical measures:Handling is performed in a well ventilated place. Wear suitable protective equipment.
Prevent generation of vapor or mist. Keep away from flames and hot surfaces. Take
measures to prevent the build up of electrostatic charge. Use explosion-proof
equipment. Wash hands and face thoroughly after handling.
Use a closed system, ventilation.
Advice on safe handling:Avoid contact with skin, eyes and clothing.
Storage
Storage conditions:Keep container tightly closed. Store in a cool, dark and well-ventilated place.
Store away from incompatible materials such as oxidizing agents.
Packaging material:Law is followed.

Section8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering controls:Install a closed system or local exhaust as possible so that workers should not be
exposed directly. Also install safety shower and eye bath.
Personal protective equipment
Respiratory protection: Vapor respirator. Follow local and national regulations.
Hand protection:Protective gloves.
Safety glasses. A face-shield, if the situation requires.
Eye protection:
Skin and body protection: Protective clothing. Protective boots, if the situation requires.
2-Bromo-1-chloro-4-fluorobenzene

Section9. PHYSICAL AND CHEMICAL PROPERTIES
Physical state (20°C):Liquid
clear
Form:
Color:Colorless - Slightly pale yellow
No data available
Odor:
pH: No data available
Melting point/freezing point:No data available
Boiling Point/Range:No data available
No data available
Flash Point:
Explosive limits
Lower:No data available
Upper:No data available
1.75
Density:
Solubility:No data available

Section10. STABILITY AND REACTIVITY
Stability:Stable under proper conditions.
Reactivity:No special reactivity has been reported.
Incompartible materials: oxidizing agents
Hazardous Decomposition Carbon monoxide, Carbon dioxide, Hydrogen fluoride, Hydrogen chloride, Hydrogen
Products:bromide

Section11. TOXICOLOGICAL INFORMATION
No data available
Acute Toxicity:
Skin corrosion/irritation: No data available
No data available
Serious eye
damage/irritation:
Germ cell mutagenicity: No data available
Carcinogenicity:
IARC =No data available
NTP =No data available
No data available
Reproductive toxicity:

Section12. ECOLOGICAL INFORMATION
Ecotoxicity:
No data available
Fish:
Crustacea:No data available
Algae:No data available
Persistence / degradability: No data available
BioaccumulativeNo data available
potential(BCF):
Mobillity in soil
log Pow:No data available
No data available
Soil adsorption (Koc):
Henry's LawNo data available
constant(PaM3/mol):

Section13. DISPOSAL CONSIDERATIONS
Recycle to process, if possible. Consult your local regional authorities. You may be able to burn in a chemical
incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local regulations when
disposing of the substance.

Section14. TRANSPORT INFORMATION
Hazards Class:Does not correspond to the classification standard of the United Nations
Not Listed
UN-No:
2-Bromo-1-chloro-4-fluorobenzene

Section15. REGULATORY INFORMATION
Safe management ordinance of dangerous chemical product (State Council announces on January 26,
2002): Safe use and production, the storage of a dangerous chemical, transport, loading and unloading were
prescribed.


SECTION 16 - ADDITIONAL INFORMATION
N/A
Hazard Codes Xi
Risk Phrases R36/37/38
Safety Phrases S26-S36/37/39
RIDADR Intermediate in organic syntheses
HS Code 2903999090
HS Code 2903999090
Summary 2903999090 halogenated derivatives of aromatic hydrocarbons VAT:17.0% Tax rebate rate:9.0% Supervision conditions:none MFN tariff:5.5% General tariff:30.0%