Methyl isobutyl ketoxime

Modify Date: 2024-01-04 17:50:11

Methyl isobutyl ketoxime Structure
Methyl isobutyl ketoxime structure
Common Name Methyl isobutyl ketoxime
CAS Number 105-44-2 Molecular Weight 115.17400
Density 0.89 g/cm3 Boiling Point 179.8ºC at 760 mmHg
Molecular Formula C6H13NO Melting Point N/A
MSDS N/A Flash Point 88.1ºC

 Names

Name N-(4-methylpentan-2-ylidene)hydroxylamine
Synonym More Synonyms

 Chemical & Physical Properties

Density 0.89 g/cm3
Boiling Point 179.8ºC at 760 mmHg
Molecular Formula C6H13NO
Molecular Weight 115.17400
Flash Point 88.1ºC
Exact Mass 115.10000
PSA 32.59000
LogP 1.88260
Vapour Pressure 0.434mmHg at 25°C
Index of Refraction 0.88

 MSDS

4-Methyl-2-pentanone Oxime Revision number: 5
SAFETY DATA SHEET

Section1. IDENTIFICATION
Product name:4-Methyl-2-pentanone Oxime

Revision number:5

Section2. HAZARDS IDENTIFICATION
GHS classification
PHYSICAL HAZARDS
Category 4
Flammable liquids
HEALTH HAZARDS
Category 2
Skin corrosion/irritation
Serious eye damage/eye irritationCategory 2A
Not classified
ENVIRONMENTAL HAZARDS
GHS label elements, including precautionary statements
Pictograms or hazard symbols
Signal wordWarning
Hazard statementsCombustible liquid
Causes skin irritation
Causes serious eye irritation
Precautionary statements:
Keep away from flames and hot surfaces.
[Prevention]
Wash hands thoroughly after handling.
Wear protective gloves and eye/face protection.
[Response]IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses,
if present and easy to do. Continue rinsing.
If eye irritation persists: Get medical advice/attention.
IF ON SKIN: Gently wash with plenty of soap and water.
If skin irritation occurs: Get medical advice/attention.
Take off contaminated clothing and wash before reuse.
[Storage]Store in a well-ventilated place. Keep cool.
[Disposal]Dispose of contents/container through a waste management company authorized by
the local government.

Section3. COMPOSITION/INFORMATION ON INGREDIENTS
Substance/mixture:Substance
Components:4-Methyl-2-pentanone Oxime
Percent:....
105-44-2
CAS Number:
Synonyms:Isobutyl Methyl Ketoxime , Isopropylacetone Oxime
4-Methyl-2-pentanone Oxime

Section3. COMPOSITION/INFORMATION ON INGREDIENTS
Chemical Formula:C6H13NO

Section4. FIRST AID MEASURES
Inhalation:Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Get medical advice/attention if you feel unwell.
Skin contact:Remove/Take off immediately all contaminated clothing. Gently wash with plenty of
soap and water. If skin irritation or rash occurs: Get medical advice/attention.
Eye contact:Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing. If eye irritation persists: Get medical
advice/attention.
Get medical advice/attention if you feel unwell. Rinse mouth.
Ingestion:
Protection of first-aiders:A rescuer should wear personal protective equipment, such as rubber gloves and air-
tight goggles.

Section5. FIRE-FIGHTING MEASURES
Dry chemical, foam, carbon dioxide.
Suitable extinguishing
media:
Unsuitable extinguishing Water (It may scatter and spread fire.)
media:
Specific hazards arising Take care as it may decompose upon combustion or in high temperatures to
from the chemical:generate poisonous fume.
Precautions for firefighters: Fire-extinguishing work is done from the windward and the suitable fire-extinguishing
method according to the surrounding situation is used. Uninvolved persons should
evacuate to a safe place. In case of fire in the surroundings: Remove movable
containers if safe to do so.
Special protectiveWhen extinguishing fire, be sure to wear personal protective equipment.
equipment for firefighters:

Section6. ACCIDENTAL RELEASE MEASURES
Personal precautions,Use personal protective equipment. Keep people away from and upwind of spill/leak.
protective equipment and Ensure adequate ventilation. Entry to non-involved personnel should be controlled
emergency procedures: around the leakage area by roping off, etc.
Environmental precautions: Prevent product from entering drains.
Methods and materials for Absorb spilled material in a suitable absorbent (e.g. rag, dry sand, earth, saw-dust).
containment and cleaning In case of large amount of spillage, contain a spill by bunding. Adhered or collected
up: material should be promptly disposed of, in accordance with appropriate laws and
regulations.
Prevention of secondary Remove all sources of ignition. Fire-extinguishing devices should be prepared in
case of a fire. Use spark-proof tools and explosion-proof equipment.
hazards:

Section7. HANDLING AND STORAGE
Precautions for safe handling
Technical measures:Handling is performed in a well ventilated place. Wear suitable protective equipment.
Prevent generation of vapour or mist. Keep away from flames and hot surfaces. Take
measures to prevent the build up of electrostatic charge. Use explosion-proof
equipment. Wash hands and face thoroughly after handling.
Use a closed system, ventilation.
Advice on safe handling: Avoid contact with skin, eyes and clothing.
Conditions for safe storage, including any
incompatibilities
Storage conditions:Keep container tightly closed. Store in a cool, dark and well-ventilated place.
Store away from incompatible materials such as oxidizing agents.
Packaging material:Comply with laws.
4-Methyl-2-pentanone Oxime

Section8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering controls:Install a closed system or local exhaust as possible so that workers should not be
exposed directly. Also install safety shower and eye bath.
Personal protective equipment
Respiratory protection: Vapor respirator. Follow local and national regulations.
Hand protection:Protective gloves.
Safety glasses. A face-shield, if the situation requires.
Eye protection:
Skin and body protection: Protective clothing. Protective boots, if the situation requires.

Section9. PHYSICAL AND CHEMICAL PROPERTIES
Physical state (20°C):Liquid
Clear
Form:
Colour:Colorless - Slightly pale yellow
No data available
Odour:
pH: No data available
Melting point/freezing point:No data available
Boiling point/range:70°C/1.1kPa
Flash point:78°C
Flammability or explosive
limits:
Lower:No data available
Upper:No data available
Relative density:0.89
Solubility(ies):
[Water]No data available
No data available
[Other solvents]

Section10. STABILITY AND REACTIVITY
Chemical stability:Stable under proper conditions.
Possibility of hazardous No special reactivity has been reported.
reactions:
Conditions to avoid:Open flame
Incompatible materials: Oxidizing agents
Hazardous decomposition Carbon monoxide, Carbon dioxide, Nitrogen oxides (NOx)
products:

Section11. TOXICOLOGICAL INFORMATION
Acute Toxicity:ipr-mus LD50:200 mg/kg
orl-mus LD50:>2 g/kg
Skin corrosion/irritation: No data available
Serious eyeNo data available
damage/irritation:
Germ cell mutagenicity: No data available
Carcinogenicity:
No data available
IARC =
NTP =No data available
Reproductive toxicity:No data available
RTECS Number:SA9450000

Section12. ECOLOGICAL INFORMATION
Ecotoxicity:
Fish:No data available
Crustacea:No data available
No data available
Algae:
Persistence / degradability: No data available
No data available
Bioaccumulative
potential(BCF):
4-Methyl-2-pentanone Oxime

Section12. ECOLOGICAL INFORMATION
Mobility in soil
No data available
Log Pow:
Soil adsorption (Koc):No data available
No data available
Henry's Law
constant(PaM3/mol):

Section13. DISPOSAL CONSIDERATIONS
Recycle to process, if possible. Consult your local regional authorities. You may be able to burn in a chemical
incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local regulations when
disposing of the substance.

Section14. TRANSPORT INFORMATION
Does not correspond to the classification standard of the United Nations
Hazards Class:
UN-No:Not listed

Section15. REGULATORY INFORMATION
Safe management ordinance of dangerous chemical product (State Council announces on January 26, 2002
and revised on February 16,2011): Safe use and production, the storage of a dangerous chemical, transport,
loading and unloading were prescribed.


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Toxicological Information

CHEMICAL IDENTIFICATION

RTECS NUMBER :
SA9450000
CHEMICAL NAME :
2-Pentanone, 4-methyl-, oxime
CAS REGISTRY NUMBER :
105-44-2
BEILSTEIN REFERENCE NO. :
1741644
LAST UPDATED :
199701
DATA ITEMS CITED :
3
MOLECULAR FORMULA :
C6-H13-N-O
MOLECULAR WEIGHT :
115.20
WISWESSER LINE NOTATION :
QNUY1&1Y1&1

HEALTH HAZARD DATA

ACUTE TOXICITY DATA

TYPE OF TEST :
LD50 - Lethal dose, 50 percent kill
ROUTE OF EXPOSURE :
Oral
SPECIES OBSERVED :
Rodent - mouse
DOSE/DURATION :
>2 gm/kg
TOXIC EFFECTS :
Details of toxic effects not reported other than lethal dose value
REFERENCE :
MEXPAG Medicina Experimentalis. (Basel, Switzerland) V.1-11, 1959-64; V.18-19, 1968-69. For publisher information, see JNMDBO. Volume(issue)/page/year: 11,137,1964
TYPE OF TEST :
LD50 - Lethal dose, 50 percent kill
ROUTE OF EXPOSURE :
Intraperitoneal
SPECIES OBSERVED :
Rodent - mouse
DOSE/DURATION :
200 mg/kg
TOXIC EFFECTS :
Details of toxic effects not reported other than lethal dose value
REFERENCE :
NTIS** National Technical Information Service. (Springfield, VA 22161) Formerly U.S. Clearinghouse for Scientific & Technical Information. Volume(issue)/page/year: AD277-689

 Safety Information

Hazard Codes Xn: Harmful;
Risk Phrases R20/21/22
Safety Phrases 26-36
RTECS SA9450000
HS Code 2928000090

 Synthetic Route

~8%

Methyl isobutyl ketoxime Structure

Methyl isobutyl...

CAS#:105-44-2

Literature: Tetrahedron Letters, , vol. 52, # 46 p. 6103 - 6107

~94%

Methyl isobutyl ketoxime Structure

Methyl isobutyl...

CAS#:105-44-2

Literature: Journal of the Indian Chemical Society, , vol. 76, # 4 p. 218 - 219

~%

Methyl isobutyl ketoxime Structure

Methyl isobutyl...

CAS#:105-44-2

Literature: Bulletin de la Societe Chimique de France, , p. 2001 - 2004

 Customs

HS Code 2928000090
Summary 2928000090 other organic derivatives of hydrazine or of hydroxylamine VAT:17.0% Tax rebate rate:9.0% Supervision conditions:none MFN tariff:6.5% General tariff:20.0%

 Synonyms

4-methyl-pentan-2-one oxime
isobutyl methyl ketone oxime
Methyl isobutyl ketoxime
MFCD00013933
isobuty methyl ketone oxime
4-Methyl-pentan-2-on-oxim
4-Methyl-2-pentanone oxime
EINECS 203-298-2
Isobutyl Methyl Ketoxime
N-hydroxy-4-methylpentan-2-imine
Isopropylacetone Oxime
Top Suppliers:I want be here



Get all suppliers and price by the below link:

Methyl isobutyl ketoxime suppliers

Methyl isobutyl ketoxime price