2,2-Difluoro-1,3-benzodioxole-4-carbaldehyde structure
|
Common Name | 2,2-Difluoro-1,3-benzodioxole-4-carbaldehyde | ||
---|---|---|---|---|
CAS Number | 119895-68-0 | Molecular Weight | 186.112 | |
Density | 1.5±0.1 g/cm3 | Boiling Point | 210.6±40.0 °C at 760 mmHg | |
Molecular Formula | C8H4F2O3 | Melting Point | N/A | |
MSDS | Chinese USA | Flash Point | 79.2±22.2 °C | |
Symbol |
GHS07 |
Signal Word | Warning |
Name | 2,2-Difluorobenzodioxole-4-carboxaldehyde |
---|---|
Synonym | More Synonyms |
Density | 1.5±0.1 g/cm3 |
---|---|
Boiling Point | 210.6±40.0 °C at 760 mmHg |
Molecular Formula | C8H4F2O3 |
Molecular Weight | 186.112 |
Flash Point | 79.2±22.2 °C |
Exact Mass | 186.012848 |
PSA | 35.53000 |
LogP | 3.00 |
Vapour Pressure | 0.2±0.4 mmHg at 25°C |
Index of Refraction | 1.525 |
Storage condition | ?20°C |
Section1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE Product identifiers Product name: 2,2-Difluoro-1,3-benzodioxole-4-carboxaldehyde CAS-No.: 119895-68-0 Section2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP] Skin irritation (Category 2) Eye irritation (Category 2) Skin sensitization (Category 1) Specific target organ toxicity - single exposure (Category 3) Classification according to EU Directives 67/548/EEC or 1999/45/EC Irritating to eyes, respiratory system and skin. May cause sensitization by skin contact. Label elements Labelling according Regulation (EC) No 1272/2008 [CLP] Pictogram Signal wordWarning Hazard statement(s) Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. May cause respiratory irritation. Precautionary statement(s) Avoid breathing vapours. Wear protective gloves. P305 + P351 + P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Supplemental Hazardnone Statements According to European Directive 67/548/EEC as amended. Hazard symbol(s) R-phrase(s) R36/37/38Irritating to eyes, respiratory system and skin. R43May cause sensitization by skin contact. S-phrase(s) S26In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37Wear suitable protective clothing and gloves. Other hazards - none Section3. COMPOSITION/INFORMATION ON INGREDIENTS Substances Synonyms: 2,2-Difluoro-1,3-benzodioxole-4-carbaldehyde 4-Formyl-2,2-difluoro-1,3-benzodioxole 2,2-Difluorobenzo[d][1,3]dioxole Formula: C7H4F2O2 Molecular Weight: 158,10 g/mol ComponentConcentration 2,2-DIFLUORO-1,3-BENZODIOXOLE-4-CARBOXALDEHYDE CAS-No.119895-68-0- Section4. FIRST AID MEASURES Description of first aid measures General advice Consult a physician. Show this safety data sheet to the doctor in attendance. If inhaled If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician. In case of skin contact Wash off with soap and plenty of water. Consult a physician. In case of eye contact Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician. If swallowed Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician. Most important symptoms and effects, both acute and delayed To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. Indication of any immediate medical attention and special treatment needed no data available Section5. FIREFIGHTING MEASURES Extinguishing media Suitable extinguishing media Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Special hazards arising from the substance or mixture Carbon oxides, Hydrogen fluoride Advice for firefighters Wear self contained breathing apparatus for fire fighting if necessary. Further information Use water spray to cool unopened containers. Section6. ACCIDENTAL RELEASE MEASURES Personal precautions, protective equipment and emergency procedures Use personal protective equipment. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Remove all sources of ignition. Evacuate personnel to safe areas. Beware of vapours accumulating to form explosive concentrations. Vapours can accumulate in low areas. Environmental precautions Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided. Methods and materials for containment and cleaning up Contain spillage, and then collect with an electrically protected vacuum cleaner or by wet-brushing and place in container for disposal according to local regulations (see section 13). Keep in suitable, closed containers for disposal. Reference to other sections For disposal see section 13. Section7. HANDLING AND STORAGE Precautions for safe handling Avoid contact with skin and eyes. Avoid inhalation of vapour or mist. Keep away from sources of ignition - No smoking.Take measures to prevent the build up of electrostatic charge. Conditions for safe storage, including any incompatibilities Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Recommended storage temperature: -20 °C Handle under nitrogen, protect from moisture. Store under nitrogen. Moisture sensitive. Specific end uses no data available Section8. EXPOSURE CONTROLS/PERSONAL PROTECTION Control parameters Components with workplace control parameters Exposure controls Appropriate engineering controls Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday. Personal protective equipment Eye/face protection Face shield and safety glasses Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Skin protection Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it. Body Protection Complete suit protecting against chemicals, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Respiratory protection Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Section9. PHYSICAL AND CHEMICAL PROPERTIES Information on basic physical and chemical properties a) AppearanceForm: liquid b) Odourno data available c) Odour Thresholdno data available d) pHno data available e) Melting point/freezingno data available point f) Initial boiling point and 62 - 64 °C at 0,9 hPa boiling range g) Flash point91,1 °C h) Evaporation rateno data available i) Flammability (solid, gas) no data available j) Upper/lowerno data available flammability or explosive limits k) Vapour pressureno data available l) Vapour densityno data available m) Relative density1,423 g/cm3 n) Water solubilityno data available o) Partition coefficient: n- log Pow: 1,929 octanol/water p) Autoignitionno data available temperature q) Decompositionno data available temperature r) Viscosityno data available s) Explosive propertiesno data available t) Oxidizing propertiesno data available Other safety information no data available Section10. STABILITY AND REACTIVITY Reactivity no data available Chemical stability no data available Possibility of hazardous reactions no data available Conditions to avoid Heat, flames and sparks. Incompatible materials Strong oxidizing agents Hazardous decomposition products Other decomposition products - no data available Section11. TOXICOLOGICAL INFORMATION Information on toxicological effects Acute toxicity no data available Skin corrosion/irritation no data available Serious eye damage/eye irritation no data available Respiratory or skin sensitization no data available Germ cell mutagenicity no data available Carcinogenicity IARC:No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC. Reproductive toxicity no data available Specific target organ toxicity - single exposure May cause respiratory irritation. Specific target organ toxicity - repeated exposure no data available Aspiration hazard no data available Potential health effects InhalationMay be harmful if inhaled. Causes respiratory tract irritation. IngestionMay be harmful if swallowed. SkinMay be harmful if absorbed through skin. Causes skin irritation. EyesCauses serious eye irritation. Signs and Symptoms of Exposure To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. Additional Information RTECS: Not available Section12. ECOLOGICAL INFORMATION Toxicity no data available Persistence and degradability no data available Bioaccumulative potential no data available Mobility in soil no data available Results of PBT and vPvB assessment no data available Other adverse effects Toxic to aquatic life. no data available Section13. DISPOSAL CONSIDERATIONS Waste treatment methods Product This combustible material may be burned in a chemical incinerator equipped with an afterburner and scrubber. Offer surplus and non-recyclable solutions to a licensed disposal company. Contaminated packaging Dispose of as unused product. Section14. TRANSPORT INFORMATION UN number ADR/RID: -IMDG: -IATA: - UN proper shipping name ADR/RID: Not dangerous goods IMDG: Not dangerous goods IATA:Not dangerous goods Transport hazard class(es) ADR/RID: -IMDG: -IATA: - Packaging group ADR/RID: -IMDG: -IATA: - Environmental hazards ADR/RID: noIMDG Marine pollutant: noIATA: no Special precautions for user no data available Section15. REGULATORY INFORMATION This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006. Safety, health and environmental regulations/legislation specific for the substance or mixture no data available Chemical Safety Assessment no data available SECTION 16 - ADDITIONAL INFORMATION N/A |
Symbol |
GHS07 |
---|---|
Signal Word | Warning |
Hazard Statements | H315-H317-H319-H335 |
Precautionary Statements | P261-P280-P305 + P351 + P338 |
Hazard Codes | Xi: Irritant; |
Risk Phrases | R36/37/38 |
Safety Phrases | S26-S36 |
RIDADR | NONH for all modes of transport |
HS Code | 2932999099 |
~88% 2,2-Difluoro-1,... CAS#:119895-68-0 |
Literature: Schlosser, Manfred; Gorecka, Joanna; Castagnetti, Eva European Journal of Organic Chemistry, 2003 , # 3 p. 452 - 462 |
~% 2,2-Difluoro-1,... CAS#:119895-68-0 |
Literature: US5344944 A1, ; |
~% 2,2-Difluoro-1,... CAS#:119895-68-0 |
Literature: US5420308 A1, ; |
~% 2,2-Difluoro-1,... CAS#:119895-68-0 |
Literature: US5637737 A1, ; |
Precursor 6 | |
---|---|
DownStream 4 | |
HS Code | 2932999099 |
---|---|
Summary | 2932999099. other heterocyclic compounds with oxygen hetero-atom(s) only. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:6.5%. General tariff:20.0% |
MFCD00792419 |
2,2-Difluoro-1,3-benzodioxole-4-carbaldehyde |
2,2-Difluoro-4-formyl-1,3-benzodioxole |
2,2-Difluorobenzodioxole-4-carboxaldehyde |
2,2-Difluoro-4-formylbenzodioxole |
2,3-(Difluoromethylenedioxy)benzaldehyde |
T56 BO DO CHJ CF CF FVH |
1,3-Benzodioxole-4-carboxaldehyde, 2,2-difluoro- |
2,2-Difluoro-1,3-benzodioxole-4-carboxaldehyde |