(R)-()-sec-Butylamine

Modify Date: 2024-01-04 12:28:44

(R)-()-sec-Butylamine Structure
(R)-()-sec-Butylamine structure
Common Name (R)-()-sec-Butylamine
CAS Number 13250-12-9 Molecular Weight 73.13680
Density 0.72 Boiling Point 57-60ºC
Molecular Formula C4H11N Melting Point -104ºC
MSDS Chinese USA Flash Point -19ºC
Symbol GHS02 GHS05 GHS07 GHS09
GHS02, GHS05, GHS07, GHS09
Signal Word Danger

 Names

Name (R)-(-)-2-Aminobutane
Synonym More Synonyms

 Chemical & Physical Properties

Density 0.72
Boiling Point 57-60ºC
Melting Point -104ºC
Molecular Formula C4H11N
Molecular Weight 73.13680
Flash Point -19ºC
Exact Mass 73.08910
PSA 26.02000
LogP 1.44390
Vapour Pressure 175mmHg at 25°C
Index of Refraction 1.3926-1.3946

 MSDS

Name: (R)-(-)-2-Aminobutane 98% Material Safety Data Sheet
Synonym: (R)-Sec-Butylamine
CAS: 13250-12-9
Section 1 - Chemical Product MSDS Name:(R)-(-)-2-Aminobutane 98% Material Safety Data Sheet
Synonym:(R)-Sec-Butylamine

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
13250-12-9 (R)-(-)-2-Aminobutane 98 236-232-6
Hazard Symbols: F C N
Risk Phrases: 11 20/22 35 50

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Highly flammable. Harmful by inhalation and if swallowed. Causes severe burns. Very toxic to aquatic organisms.Corrosive.Dangerous for the environment.
Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal damage.
Skin:
Causes skin burns. May cause cyanosis of the extremities. May cause skin rash (in milder cases), and cold and clammy skin with cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. May cause gastrointestinal irritation with nausea, vomiting and diarrhea. Causes gastrointestinal tract burns. May cause perforation of the digestive tract. Ingestion of large amounts may cause CNS depression. May cause systemic effects.
Inhalation:
Causes chemical burns to the respiratory tract. Aspiration may lead to pulmonary edema. Vapors may cause dizziness or suffocation. May cause systemic effects. May cause burning sensation in the chest.
Chronic:
Effects may be delayed.

Section 4 - FIRST AID MEASURES
Eyes: Get medical aid immediately. Do NOT allow victim to rub eyes or keep eyes closed. Extensive irrigation with water is required (at least 30 minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Do NOT use mouth-to-mouth resuscitation. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
Notes to Physician:

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Will burn if involved in a fire. Use water spray to keep fire-exposed containers cool. Water may be ineffective. Material is lighter than water and a fire may be spread by the use of water. Containers may explode in the heat of a fire.
Flammable liquid and vapor. Vapors may be heavier than air. They can spread along the ground and collect in low or confined areas.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or alcohol-resistant foam. For large fires, use water spray, fog, or alcohol-resistant foam. Use water spray to cool fire-exposed containers. Water may be ineffective. Do NOT use straight streams of water.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, observing precautions in the Protective Equipment section. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation. A vapor suppressing foam may be used to reduce vapors.

Section 7 - HANDLING and STORAGE
Handling:
Use only in a well-ventilated area. Ground and bond containers when transferring material. Use spark-proof tools and explosion proof equipment. Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin, or on clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Keep away from heat, sparks and flame. Discard contaminated shoes. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of ignition. Keep container closed when not in use. Store in a cool, dry, well-ventilated area away from incompatible substances.
Flammables-area.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate general or local explosion-proof ventilation to keep airborne levels to acceptable levels.
Exposure Limits CAS# 13250-12-9: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Liquid
Color: colorless
Odor: amine-like
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 57 - 60 deg C @ 760.00mm Hg
Freezing/Melting Point: -104 deg C
Autoignition Temperature: Not available.
Flash Point: -19 deg C ( -2.20 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: in water: > 10 mg/l
Specific Gravity/Density: .7240g/cm3
Molecular Formula: C4H11N
Molecular Weight: 73.13

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, strong oxidants.
Incompatibilities with Other Materials:
Acids, acid chlorides, acid anhydrides, carbon dioxide, strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: Has not been reported

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 13250-12-9 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
(R)-(-)-2-Aminobutane - Not listed by ACGIH, IARC, or NTP.

Section 12 - ECOLOGICAL INFORMATION


Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

IATA
Shipping Name: AMINES, FLAMMABLE, CORROSIVE, N.O.S.*
Hazard Class: 3 (8)
UN Number: 2733
Packing Group: II
IMO
Shipping Name: AMINES, FLAMMABLE, CORROSIVE, N.O.S.
Hazard Class: 3.1
UN Number: 2733
Packing Group: II
RID/ADR
Shipping Name: AMINES, FLAMMABLE, CORROSIVE, N.O.S.
Hazard Class: 3
UN Number: 2733
Packing group: II

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F C N
Risk Phrases:
R 11 Highly flammable.
R 20/22 Harmful by inhalation and if swallowed.
R 35 Causes severe burns.
R 50 Very toxic to aquatic organisms.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28A After contact with skin, wash immediately with
plenty of water.
S 33 Take precautionary measures against static
discharges.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 13250-12-9: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 13250-12-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 13250-12-9 is not listed on the TSCA inventory.
It is for research and development use only.


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

Symbol GHS02 GHS05 GHS07 GHS09
GHS02, GHS05, GHS07, GHS09
Signal Word Danger
Hazard Statements H225-H302 + H332-H314-H400
Precautionary Statements P210-P273-P280-P305 + P351 + P338-P310
Personal Protective Equipment Faceshields;full-face respirator (US);Gloves;Goggles;multi-purpose combination respirator cartridge (US)
Hazard Codes F:Flammable;C:Corrosive;N:Dangerousfortheenvironment;
Risk Phrases R11;R20/22;R35;R50
Safety Phrases S16-S26-S28-S36/37/39-S45-S61-S9
RIDADR UN 2733
WGK Germany 3
Packaging Group II
Hazard Class 3
HS Code 2921199090

 Synthetic Route

 Customs

HS Code 2921199090
Summary 2921199090 other acyclic monoamines and their derivatives; salts thereof VAT:17.0% Tax rebate rate:9.0% Supervision conditions:none MFN tariff:6.5% General tariff:30.0%

 Synonyms

EINECS 236-232-6
D-Valinol
(R)-(-)-sec-ButylaMine
MFCD07776991