Fmoc-N-Me-Ile-OH

Modify Date: 2024-01-02 19:12:40

Fmoc-N-Me-Ile-OH Structure
Fmoc-N-Me-Ile-OH structure
Common Name Fmoc-N-Me-Ile-OH
CAS Number 138775-22-1 Molecular Weight 367.438
Density 1.2±0.1 g/cm3 Boiling Point 537.3±29.0 °C at 760 mmHg
Molecular Formula C22H25NO4 Melting Point 177-183ºC
MSDS Chinese USA Flash Point 278.7±24.3 °C

 Use of Fmoc-N-Me-Ile-OH


Fmoc-N-Me-Ile-OH is a used in peptide synthesis[1].

 Names

Name (2S,3S)-2-[9H-fluoren-9-ylmethoxycarbonyl(methyl)amino]-3-methylpentanoic acid
Synonym More Synonyms

 Chemical & Physical Properties

Density 1.2±0.1 g/cm3
Boiling Point 537.3±29.0 °C at 760 mmHg
Melting Point 177-183ºC
Molecular Formula C22H25NO4
Molecular Weight 367.438
Flash Point 278.7±24.3 °C
Exact Mass 367.178345
PSA 66.84000
LogP 5.44
Vapour Pressure 0.0±1.5 mmHg at 25°C
Index of Refraction 1.581
Storage condition 2-8°C

 MSDS


SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifiers
Product name: Fmoc-N-Me-Ile-OH
REACH No.: A registration number is not available for this substance as the substance
or its uses are exempted from registration, the annual tonnage does not
require a registration or the registration is envisaged for a later
registration deadline.
CAS-No.: 138775-22-1
Relevant identified uses of the substance or mixture and uses advised against
Identified uses: Laboratory chemicals, Manufacture of substances



SECTION 2: Hazards identification
Classification of the substance or mixture
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
Not a hazardous substance or mixture according to EC-directives 67/548/EEC or 1999/45/EC.
Label elements
Other hazards - none

SECTION 3: Composition/information on ingredients
Substances
Chemical characterization : Natural product
Synonyms: Fmoc-N-methyl-L-isoleucine
Formula: C22H25NO4
Molecular Weight: 367,44 g/mol
CAS-No.: 138775-22-1
No components need to be disclosed according to the applicable regulations.

SECTION 4: First aid measures
Description of first aid measures
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration.
In case of skin contact
Wash off with soap and plenty of water.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
Indication of any immediate medical attention and special treatment needed
no data available

SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Carbon oxides, nitrogen oxides (NOx)
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available

SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Avoid dust formation. Avoid breathing vapours, mist or gas.
For personal protection see section 8.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Sweep up and shovel. Keep in suitable, closed containers for disposal.
Reference to other sections
For disposal see section 13.

SECTION 7: Handling and storage
Precautions for safe handling
Provide appropriate exhaust ventilation at places where dust is formed.
For precautions see section 2.2.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Recommended storage temperature: 2 - 8 °C
Specific end use(s)
A part from the uses mentioned in section 1.2 no other specific uses are stipulated

SECTION 8: Exposure controls/personal protection
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
General industrial hygiene practice.
Personal protective equipment
Eye/face protection
Use equipment for eye protection tested and approved under appropriate government standards
such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Full contact
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min
Material tested:Dermatril® (KCL 740 / Z677272, Size M)
Splash contact
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min
Material tested:Dermatril® (KCL 740 / Z677272, Size M)
data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 87300, test method: EN374
If used in solution, or mixed with other substances, and under conditions which differ from EN 374,
contact the supplier of the CE approved gloves. This recommendation is advisory only and must
be evaluated by an industrial hygienist and safety officer familiar with the specific situation of
anticipated use by our customers. It should not be construed as offering an approval for any
specific use scenario.
Body Protection
Choose body protection in relation to its type, to the concentration and amount of dangerous
substances, and to the specific work-place., The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Respiratory protection is not required. Where protection from nuisance levels of dusts are desired,
use type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and
approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Do not let product enter drains.

SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
a) AppearanceForm: powder
Colour: beige
b) Odourno data available
c) Odour Thresholdno data available
d) pHno data available
e) Melting point/freezingno data available
point
f) Initial boiling point and no data available
boiling range
g) Flash pointno data available
h) Evapouration rateno data available
i) Flammability (solid, gas) no data available
j) Upper/lowerno data available
flammability or
explosive limits
k) Vapour pressureno data available
l) Vapour densityno data available
m) Relative densityno data available
n) Water solubilityno data available
o) Partition coefficient: n- no data available
octanol/water
p) Auto-ignitionno data available
temperature
q) Decompositionno data available
temperature
r) Viscosityno data available
s) Explosive propertiesno data available
t) Oxidizing propertiesno data available
Other safety information
no data available

SECTION 10: Stability and reactivity
Reactivity
no data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
no data available
Conditions to avoid
no data available
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
Other decomposition products - no data available
In the event of fire: see section 5

SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitisation
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC:No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Additional Information
RTECS: Not available

SECTION 12: Ecological information
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted
Other adverse effects
no data available

SECTION 13: Disposal considerations
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company.
Contaminated packaging
Dispose of as unused product.

SECTION 14: Transport information
UN number
ADR/RID: -IMDG: -IATA: -
UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA:Not dangerous goods
Transport hazard class(es)
ADR/RID: -IMDG: -IATA: -
Packaging group
ADR/RID: -IMDG: -IATA: -
Environmental hazards
ADR/RID: noIMDG Marine pollutant: noIATA: no
Special precautions for user
no data available

SECTION 15: Regulatory information
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Safety, health and environmental regulations/legislation specific for the substance or mixture
no data available
Chemical Safety Assessment
For this product a chemical safety assessment was not carried out

SECTION 16: Other information
Further information
Copyright 2013 Co. LLC. License granted to make unlimited paper copies for internal use
only.
The above information is believed to be correct but does not purport to be all inclusive and shall be
used only as a guide. The information in this document is based on the present state of our knowledge
and is applicable to the product with regard to appropriate safety precautions. It does not represent any
guarantee of the properties of the product. Corporation and its Affiliates shall not be held
liable for any damage resulting from handling or from contact with the above product. See
and/or the reverse side of invoice or packing slip for additional terms and conditions of sale.

 Safety Information

Personal Protective Equipment Eyeshields;Gloves;type N95 (US);type P1 (EN143) respirator filter
Hazard Codes Xi
Safety Phrases 22-24/25
RIDADR NONH for all modes of transport
WGK Germany 3

 Synthetic Route

~95%

Fmoc-N-Me-Ile-OH Structure

Fmoc-N-Me-Ile-OH

CAS#:138775-22-1

Literature: Di Gioia, Maria Luisa; Leggio, Antonella; Liguori, Angelo; Perri, Francesca; Siciliano, Carlo; Viscomi, Maria Caterina Amino Acids, 2010 , vol. 38, # 1 p. 133 - 143

~70%

Fmoc-N-Me-Ile-OH Structure

Fmoc-N-Me-Ile-OH

CAS#:138775-22-1

Literature: Leggio, Antonella; Belsito, Emilia Lucia; De Marco, Rosaria; Liguori, Angelo; Perri, Francesca; Viscomi, Maria Caterina Journal of Organic Chemistry, 2010 , vol. 75, # 5 p. 1386 - 1392

~45%

Fmoc-N-Me-Ile-OH Structure

Fmoc-N-Me-Ile-OH

CAS#:138775-22-1

Literature: Patiny, Luc; Guichou, Jean-Francois; Keller, Michael; Turpin, Olivier; Rueckle, Thomas; Lhote, Philippe; Buetler, Timo M.; Ruegg, Urs T.; Wenger, Roland M.; Mutter, Manfred Tetrahedron, 2003 , vol. 59, # 28 p. 5241 - 5249

~90%

Fmoc-N-Me-Ile-OH Structure

Fmoc-N-Me-Ile-OH

CAS#:138775-22-1

Literature: Di Gioia, Maria Luisa; Leggio, Antonella; Liguori, Angelo; Perri, Francesca Journal of Organic Chemistry, 2007 , vol. 72, # 10 p. 3723 - 3728

 Synonyms

AmbotzFAA1398
Fmoc-N-methyl-isoleucine
N-Fmoc-N-methyl-L-isoleucine
N-[(9H-Fluoren-9-ylmethoxy)carbonyl]-N-methyl-L-isoleucine
Fmoc-N-Me-Ile-OH
Fmoc-N-methyl-L-isoleucine
L-Isoleucine, N-[(9H-fluoren-9-ylmethoxy)carbonyl]-N-methyl-
Fmoc-N-Me-L-Ile-OH
N-Fmoc-N-Me-Ile
TMA029
MFCD00153389
Top Suppliers:I want be here





Get all suppliers and price by the below link:

Fmoc-N-Me-Ile-OH suppliers


Price: ¥550/10 mM * 1 mL in DMSO

Reference only. check more Fmoc-N-Me-Ile-OH price