Tetraamminecopper sulphate

Modify Date: 2024-01-02 18:47:32

Tetraamminecopper sulphate Structure
Tetraamminecopper sulphate structure
Common Name Tetraamminecopper sulphate
CAS Number 14283-05-7 Molecular Weight 245.74600
Density N/A Boiling Point 330ºC at 760mmHg
Molecular Formula CuH14N4O5S Melting Point N/A
MSDS N/A Flash Point N/A

 Names

Name Tetraamminecopper(II) sulfate hydrate
Synonym More Synonyms

 Chemical & Physical Properties

Boiling Point 330ºC at 760mmHg
Molecular Formula CuH14N4O5S
Molecular Weight 245.74600
Exact Mass 244.99800
PSA 110.83000
LogP 0.97160
Vapour Pressure 3.35E-05mmHg at 25°C

 MSDS


Section 1: Product Identification
Chemical Name:Tetraamminecopper (II) sulfatehydrate
CAS Registry Number:14283-05-7
Formula:[Cu(NH3)4]SO4.XH2O
EINECS Number:none
Chemical Family:metal-ammine complexes
Synonym:None

Section 2: Composition and Information on Ingredients
IngredientCAS NumberPercentACGIH (TWA)OSHA (PEL)
Title Compound14283-05-7100%1mg/m3 (as Cu)1mg/m3 (as Cu)

Section 3: Hazards Identification
Emergency Overview:Irritating to skin, eyes and respiratory tract.
Primary Routes of Exposure:Ingestion, inhalation
Eye Contact:Causes slight to mild irritation of the eyes
Skin Contact:Causes slight to mild irritation of the skin.
Inhalation:Irritating to the nose, mucous membranes and respiratory tract.
Ingestion:Ingestion of copper compounds may lead to vomiting, exhaustion, anemia, convulsions and coma.
Acute Health Affects:Irritating to skin, eyes and respiratory tract.
Chronic Health Affects:No information available on long-term chronic effects.
NTP:No
IARC:No
OSHA:No

SECTION 4: First Aid Measures
Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need
Eye Exposure:
assistance in keeping their eye lids open. Get immediate medical attention.
Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if
Skin Exposure:
irritation persists.
Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty
Inhalation:
in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance.
Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce
Ingestion:
vomiting only if directed by medical personnel.

SECTION 5: Fire Fighting Measures
Flash Point:none
Autoignition Temperature:none
Explosion Limits:none
Extinguishing Medium:carbon dioxide, foam or dry powder
If this product is involved in a fire, fire fighters should be equipped with a NIOSH approved positive pressure
Special Fire Fighting Procedures:
self-contained breathing apparatus and full protective clothing.
Hazardous Combustion andIf involved in a fire this material may emit irritating fumes.
Decomposion Products:
Unusual Fire or Explosion Hazards: No unusual fire or explosion hazards.

SECTION 6: Accidental Release Measures
Spill and Leak Procedures:Small spills can be mixed with vermiculite or sodium carbonate and swept up.

SECTION 7: Handling and Storage
Handling and Storage:Store in a tightly sealed container.

SECTION 8: Exposure Controls and Personal Protection
Eye Protection:Always wear approved safety glasses when handling a chemical substance in the laboratory.
Skin Protection:Wear protective clothing and gloves.
Ventilation:Material may form a fine dust. If possible, handle the material in an efficient fume hood.
If ventilation is not available a respirator should be worn. The use of respirators requires a Respirator
Respirator:
Protection Program to be in compliance with 29 CFR 1910.134.
Ventilation:Material may form a fine dust. If possible, handle the material in an efficient fume hood.
Additional Protection:No additional protection required.

SECTION 9: Physical and Chemical Properties
Color and Form:blue xtl.
Molecular Weight:227.72
Melting Point:no data
Boiling Point:no data
Vapor Pressure:not applicable
Specific Gravity:no data
Odor:None
Solubility in Water:soluble

SECTION 10: Stability and Reactivity
Stability:air and moisture stable
Hazardous Polymerization:no hazardous polymerization
Conditions to Avoid:contact with strong oxidizing agents
Incompatibility:oxidizing agents, azides and acetylene
Decomposition Products:Ammonia, sulfur dioxide, and copper salts

SECTION 11: Toxicological Information
RTECS Data:No specific information available on this product.
Carcinogenic Effects:No data available
Mutagenic Effects:No data available
Tetratogenic Effects:No data available

SECTION 12: Ecological Information
Ecological Information:No information available

SECTION 13: Disposal Considerations
Disposal:Dispose of according to local, state and federal regulations.

SECTION 14: Transportation
Shipping Name (CFR):Non-hazardous
Hazard Class (CFR):NA
Additional Hazard Class (CFR):NA
Packaging Group (CFR):NA
UN ID Number (CFR):NA
Shipping Name (IATA):Non-hazardous
Hazard Class (IATA):NA
Additional Hazard Class (IATA):NA
Packaging Group (IATA):NA
UN ID Number (IATA):NA

SECTION 15: Regulatory Information
TSCA:listed on the TSCA inventory
SARA (Title 313):Title Compound: see Category Code N100 for reporting.
Second Ingredient:none


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

Safety Phrases 22-24/25

 Synthetic Route

~%

Tetraamminecopper sulphate Structure

Tetraamminecopp...

CAS#:14283-05-7

Literature: Comptes Rendus Hebdomadaires des Seances de l'Academie des Sciences, , vol. 135, p. 534 - 537

 Synonyms

Copper ammine sulfate
Tetraamminecopper Sulfate
Cupric sulfate ammoniate
COPPERTETRAMINESULPHATE
tetraamminecopper sulphate
Copper tetraammine sulfate