4-nitro-N-[(4-nitrophenyl)sulfamoyl]aniline structure
|
Common Name | 4-nitro-N-[(4-nitrophenyl)sulfamoyl]aniline | ||
---|---|---|---|---|
CAS Number | 19757-13-2 | Molecular Weight | 338.29600 | |
Density | 1.683g/cm3 | Boiling Point | 555.6ºC at 760mmHg | |
Molecular Formula | C12H10N4O6S | Melting Point | N/A | |
MSDS | N/A | Flash Point | 289.8ºC |
Name | 4-nitro-N-[(4-nitrophenyl)sulfamoyl]aniline |
---|---|
Synonym | More Synonyms |
Density | 1.683g/cm3 |
---|---|
Boiling Point | 555.6ºC at 760mmHg |
Molecular Formula | C12H10N4O6S |
Molecular Weight | 338.29600 |
Flash Point | 289.8ºC |
Exact Mass | 338.03200 |
PSA | 158.22000 |
LogP | 4.54500 |
Vapour Pressure | 2.2E-12mmHg at 25°C |
Index of Refraction | 1.723 |
Version 1.2
Regulation (EC) No 1907/2006 1 - Product and Company Information Product NameN,N'-BIS(4-NITROPHENYL)SULFAMIDE 2 - Hazards Identification 3 - Composition/Information on Ingredients Product NameCAS #EC noAnnex I Index Number N,N'-BIS(4-NITROPHENYL)SULFAMIDE NoneNoneNone 4 - First Aid Measures AFTER INHALATION If inhaled, remove to fresh air. If not breathing give artificial respiration. If breathing is difficult, give oxygen. AFTER SKIN CONTACT In case of contact, immediately wash skin with soap and copious amounts of water. AFTER EYE CONTACT In case of contact, immediately flush eyes with copious amounts of water for at least 15 minutes. AFTER INGESTION If swallowed, wash out mouth with water provided person is conscious. Call a physician. 5 - Fire Fighting Measures EXTINGUISHING MEDIA Suitable: Water spray. Carbon dioxide, dry chemical powder, or appropriate foam. SPECIAL RISKS Specific Hazard(s): Emits toxic fumes under fire conditions. ALDRICHwww.molbase.com SPECIAL PROTECTIVE EQUIPMENT FOR FIREFIGHTERS Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes. 6 - Accidental Release Measures PROCEDURE(S) OF PERSONAL PRECAUTION(S) Wear self-contained breathing apparatus, rubber boots, and heavy rubber gloves. METHODS FOR CLEANING UP Sweep up, place in a bag and hold for waste disposal. Avoid raising dust. Ventilate area and wash spill site after material pickup is complete. 7 - Handling and Storage HANDLING Directions for Safe Handling: Avoid contact and inhalation. Do not get in eyes, on skin, on clothing. STORAGE Conditions of Storage: Keep tightly closed. Store in a cool dry place. 8 - Exposure Controls / Personal Protection ENGINEERING CONTROLS Safety shower and eye bath. Mechanical exhaust required. GENERAL HYGIENE MEASURES Wash thoroughly after handling. Wash contaminated clothing before reuse. PERSONAL PROTECTIVE EQUIPMENT Respiratory Protection: Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Respiratory protection is not required. Where protection from nuisance levels of dusts are desired, use type N95 (US) or type P1 (EN 143) dust masks. Hand Protection: Rubber gloves. Eye Protection: Chemical safety goggles. 9 - Physical and Chemical Properties AppearancePhysical State: Solid PropertyValueAt Temperature or Pressure pHN/A BP/BP RangeN/A MP/MP RangeN/A Flash PointN/A FlammabilityN/A Autoignition TempN/A Oxidizing PropertiesN/A Explosive PropertiesN/A Explosion LimitsN/A Vapor PressureN/A Partition CoefficientN/A ALDRICHwww.molbase.com ViscosityN/A Vapor DensityN/A Saturated Vapor Conc. N/A Evaporation RateN/A Bulk DensityN/A Decomposition Temp.N/A Solvent ContentN/A Water ContentN/A Surface TensionN/A ConductivityN/A Miscellaneous DataN/A SolubilityN/A 10 - Stability and Reactivity STABILITY Stable: Stable. Materials to Avoid: Strong oxidizing agents, Strong bases, Strong acids. HAZARDOUS DECOMPOSITION PRODUCTS Hazardous Decomposition Products: Carbon monoxide, Carbon dioxide, Nitrogen oxides, Sulfur oxides. HAZARDOUS POLYMERIZATION Hazardous Polymerization: Will not occur 11 - Toxicological Information SIGNS AND SYMPTOMS OF EXPOSURE To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. ROUTE OF EXPOSURE Inhalation: Material is irritating to mucous membranes and upper respiratory tract. Multiple Routes: Causes eye and skin irritation. May be harmful by inhalation, ingestion, or skin absorption. 12 - Ecological Information No data available. 13 - Disposal Considerations SUBSTANCE DISPOSAL Dissolve or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber. Observe all federal, state, and local environmental regulations. 14 - Transport Information 15 - Regulatory Information Caution: Substance not yet fully tested (EU). COUNTRY SPECIFIC INFORMATION ALDRICHwww.molbase.com Germany WGK: 3 Self-Classification 16 - Other Information WARRANTY The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. Inc., shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale. Copyright 2010 Co. License granted to make unlimitedpaper copies for internal use only. DISCLAIMER For R&D use only. Not for drug, household or other uses. ALDRICHwww.molbase.com SECTION 16 - ADDITIONAL INFORMATION N/A |
~21% 4-nitro-N-[(4-n... CAS#:19757-13-2 |
Literature: Leontiev, Alexander V.; Rasika Dias; Rudkevich, Dmitry M. Chemical Communications, 2006 , # 27 p. 2887 - 2889 |
Precursor 1 | |
---|---|
DownStream 2 | |
p,p'-Dinitro-N,N'-sulfonyldianilin |
4.4'-Dinitro-sulfanilid |
N.N'-Bis-<4-nitro-phenyl>-sulfamid |
T0504-5501 |