1,3-bis-(Chloromethyl)tetramethyldisiloxane

Modify Date: 2024-01-02 19:27:57

1,3-bis-(Chloromethyl)tetramethyldisiloxane Structure
1,3-bis-(Chloromethyl)tetramethyldisiloxane structure
Common Name 1,3-bis-(Chloromethyl)tetramethyldisiloxane
CAS Number 2362-10-9 Molecular Weight 231.268
Density 1.0±0.1 g/cm3 Boiling Point 204.7±0.0 °C at 760 mmHg
Molecular Formula C6H16Cl2OSi2 Melting Point -90°C
MSDS N/A Flash Point 63.3±12.5 °C

 Names

Name 1,3-Bis(chloromethyl)-1,1,3,3-tetramethyldisiloxane
Synonym More Synonyms

 Chemical & Physical Properties

Density 1.0±0.1 g/cm3
Boiling Point 204.7±0.0 °C at 760 mmHg
Melting Point -90°C
Molecular Formula C6H16Cl2OSi2
Molecular Weight 231.268
Flash Point 63.3±12.5 °C
Exact Mass 230.011673
PSA 9.23000
LogP 4.67
Vapour Pressure 0.4±0.3 mmHg at 25°C
Index of Refraction 1.428
Storage condition 2-8°C

 MSDS

1,3-Bis(chloromethyl)tetramethyldisiloxane Revision number: 1
SAFETY DATA SHEET

Section1. BASE INFORMATION
Product name:1,3-Bis(chloromethyl)tetramethyldisiloxane

Revision number:1

Section2. HAZARDS IDENTIFICATION
Classification of the GHS
PHYSICAL HAZARDS
Flammable liquidsCategory 4
HEALTH HAZARDS
Skin corrosion/irritationCategory 2
Category 2A
Serious eye damage/eye irritation
ENVIRONMENTAL HAZARDSNot classified
GHS label elements
Pictograms or hazard symbols
Signal wordWarning
Hazard statementCombustible liquid
Causes skin irritation
Causes serious eye irritation
Precautionary statements
[Prevention]Keep away from flames and hot surfaces.
Wash hands thoroughly after handling.
Wear protective gloves and eye/face protection.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses,
[Response]
if present and easy to do. Continue rinsing.
If eye irritation persists: Get medical advice/attention.
IF ON SKIN: Gently wash with plenty of soap and water.
If skin irritation occurs: Get medical advice/attention.
Take off contaminated clothing and wash before reuse.
Store in a well-ventilated place. Keep cool.
[Storage]
[Disposal]Dispose of contents/container through a waste management company authorized by
the local government

Section3. COMPOSITION/INFORMATION ON INGREDIENTS
Substance/mixture:Substance
Component(s):1,3-Bis(chloromethyl)tetramethyldisiloxane
>98.0%(GC)
Percent:
CAS Number:2362-10-9
Chemical Formula:C6H16Cl2OSi2
1,3-Bis(chloromethyl)tetramethyldisiloxane

Section4. FIRST AID MEASURES
Inhalation:Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Get medical advice/attention if you feel unwell.
Skin contact:Remove/Take off immediately all contaminated clothing. Gently wash with plenty of
soap and water. If skin irritation or rash occurs: Get medical advice/attention.
Eye contact:Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing. If eye irritation persists: Get medical
advice/attention.
Ingestion:Get medical advice/attention if you feel unwell. Rinse mouth.
A rescuer should wear personal protective equipment, such as rubber gloves and air-
Protection of first-aiders:
tight goggles.

Section5. FIRE-FIGHTING MEASURES
Suitable extinguishingDry chemical, foam, water spray, carbon dioxide.
media:
Extinguishing media not to Solid streams of water
be used:
Specific hazards:Take care as it may decompose upon combustion or in high temperatures to
generate poisonous fume.
Specific methods:Fire-extinguishing work is done from the windward and the suitable fire-extinguishing
method according to the surrounding situation is used. Uninvolved persons should
evacuate to a safe place. In case of fire in the surroundings: Remove movable
containers if safe to do so.
Special protectiveWhen extinguishing fire, be sure to wear personal protective equipment.
equipment for firefighters:

Section6. ACCIDENTAL RELEASE MEASURES
Personal precautions,Use personal protective equipment. Keep people away from and upwind of spill/leak.
protective equipment and Ensure adequate ventilation. Entry to non-involved personnel should be controlled
emergency procedures: around the leakage area by roping off, etc.
Environmental precautions: Prevent product from entering drains.
Methods and materials for Absorb spilled material in a suitable absorbent (e.g. rag, dry sand, earth, saw-dust).
containment and cleaning In case of large amount of spillage, contain a spill by bunding. Adhered or collected
up: material should be promptly disposed of, in accordance with appropriate laws and
regulations.
Prevention of secondary Remove all sources of ignition. Fire-extinguishing devices should be prepared in
hazards:case of a fire. Use spark-proof tools and explosion-proof equipment.

Section7. HANDLING AND STORAGE
Handling
Technical measures:Handling is performed in a well ventilated place. Wear suitable protective equipment.
Prevent generation of vapor or mist. Keep away from flames and hot surfaces. Take
measures to prevent the build up of electrostatic charge. Use explosion-proof
equipment. Wash hands and face thoroughly after handling.
Use a closed system, ventilation.
Avoid contact with skin, eyes and clothing.
Advice on safe handling:
Storage
Storage conditions:Keep container tightly closed. Store in a cool, dark and well-ventilated place.
Store under inert gas.
Protect from moisture.
Store away from incompatible materials such as oxidizing agents.
Packaging material:Law is followed.

Section8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering controls:Install a closed system or local exhaust as possible so that workers should not be
exposed directly. Also install safety shower and eye bath.
Personal protective equipment
1,3-Bis(chloromethyl)tetramethyldisiloxane

Section8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Respiratory protection: Vapor respirator. Follow local and national regulations.
Hand protection:Protective gloves.
Eye protection:Safety glasses. A face-shield, if the situation requires.
Skin and body protection: Protective clothing. Protective boots, if the situation requires.

Section9. PHYSICAL AND CHEMICAL PROPERTIES
Physical state (20°C):Liquid
Form:clear
Color:Colorless - Very pale yellow
Odor:No data available
pH: No data available
Melting point/freezing point:No data available
Boiling Point/Range:204 °C
Flash Point:73°C
Explosive limits
Lower:No data available
Upper:No data available
Density:1.05
Solubility:Insoluble in: Water

Section10. STABILITY AND REACTIVITY
Stability:Stable under proper conditions.
Reactivity:No special reactivity has been reported.
Moisture-sensitive
Conditions to avoid:
Incompartible materials: oxidizing agents
Hazardous Decomposition Carbon monoxide, Carbon dioxide, Hydrogen chloride, Silicon oxides
Products:

Section11. TOXICOLOGICAL INFORMATION
Acute Toxicity:No data available
Skin corrosion/irritation: No data available
Serious eyeNo data available
damage/irritation:
Germ cell mutagenicity: No data available
Carcinogenicity:
No data available
IARC =
NTP =No data available
Reproductive toxicity:No data available

Section12. ECOLOGICAL INFORMATION
Ecotoxicity:
Fish:No data available
No data available
Crustacea:
Algae:No data available
Persistence / degradability: No data available
BioaccumulativeNo data available
potential(BCF):
Mobillity in soil
log Pow:No data available
Soil adsorption (Koc):No data available
Henry's LawNo data available
constant(PaM3/mol):
1,3-Bis(chloromethyl)tetramethyldisiloxane

Section13. DISPOSAL CONSIDERATIONS
Recycle to process, if possible. Consult your local regional authorities. You may be able to burn in a chemical
incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local regulations when
disposing of the substance.

Section14. TRANSPORT INFORMATION
Hazards Class:Does not correspond to the classification standard of the United Nations
UN-No:Not Listed

Section15. REGULATORY INFORMATION
Safe management ordinance of dangerous chemical product (State Council announces on January 26,
2002): Safe use and production, the storage of a dangerous chemical, transport, loading and unloading were
prescribed.


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

Hazard Codes Xi:Irritant;
Risk Phrases R36/37/38
Safety Phrases S26-S36/37/39-S36
RIDADR UN 1993
HS Code 2934999090

 Synthetic Route

 Customs

HS Code 2934999090
Summary 2934999090. other heterocyclic compounds. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:6.5%. General tariff:20.0%

 Synonyms

1,3-Bis(chloroMethyl)tetraMethyldisiloxane
EINECS 219-109-1
Disiloxane, 1,3-bis(chloromethyl)-1,1,3,3-tetramethyl-
MFCD00000877
1,3-Bis(chloromethyl)-1,1,3,3-tetramethyldisiloxane
Top Suppliers:I want be here



Get all suppliers and price by the below link:

1,3-bis-(Chloromethyl)tetramethyldisiloxane suppliers


Price: ¥3166.8/500g

Reference only. check more 1,3-bis-(Chloromethyl)tetramethyldisiloxane price