[4-(4-Morpholinyl)phenyl]methanol

Modify Date: 2024-01-29 22:50:25

[4-(4-Morpholinyl)phenyl]methanol structure	Common Name	[4-(4-Morpholinyl)phenyl]methanol
	CAS Number	280556-71-0	Molecular Weight	193.242
	Density	1.2±0.1 g/cm3	Boiling Point	378.4±42.0 °C at 760 mmHg
	Molecular Formula	C₁₁H₁₅NO₂	Melting Point	96ºC
	MSDS	Chinese USA	Flash Point	182.7±27.9 °C

Name	(4-morpholin-4-ylphenyl)methanol
Synonym	More Synonyms

Density	1.2±0.1 g/cm3
Boiling Point	378.4±42.0 °C at 760 mmHg
Melting Point	96ºC
Molecular Formula	C₁₁H₁₅NO₂
Molecular Weight	193.242
Flash Point	182.7±27.9 °C
Exact Mass	193.110275
PSA	32.70000
LogP	0.17
Vapour Pressure	0.0±0.9 mmHg at 25°C
Index of Refraction	1.568
Storage condition	2-8°C

Name:	(4-Morpholin-4-yl-phenyl)-methanol 95+% Material Safety Data Sheet
Synonym:
CAS:	280556-71-0

Section 1 - Chemical Product MSDS Name:(4-Morpholin-4-yl-phenyl)-methanol 95+% Material Safety Data Sheet
Synonym:

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS

CAS#	Chemical Name	content	EINECS#
280556-71-0	(4-Morpholin-4-yl-phenyl)-methanol	95+%	unlisted

Hazard Symbols: XI
Risk Phrases: 36/37/38

Section 3 - HAZARDS IDENTIFICATION

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.
Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation. May be harmful if absorbed through the skin.
Ingestion:
May cause irritation of the digestive tract. May be harmful if swallowed.
Inhalation:
Causes respiratory tract irritation. May be harmful if inhaled.
Chronic:
Not available.

Section 4 - FIRST AID MEASURES
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
Get medical aid. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal container.

Section 7 - HANDLING and STORAGE
Handling:
Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin and eyes.
Storage:
Store in a cool, dry place. Store in a tightly closed container.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 280556-71-0: Personal Protective Equipment Eyes: Not available.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Solid
Color: pale yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C11H15NO2
Molecular Weight: 193.25

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Not available.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Oxidizing agents, acids.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 280556-71-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
(4-Morpholin-4-yl-phenyl)-methanol - Not listed by ACGIH, IARC, or NTP.

Section 12 - ECOLOGICAL INFORMATION

Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

IATA
No information available.
IMO
No information available.
RID/ADR
No information available.

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 280556-71-0: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 280556-71-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 280556-71-0 is not listed on the TSCA inventory.
It is for research and development use only.

SECTION 16 - ADDITIONAL INFORMATION
N/A