(1,10-PHENANTHROLINE)BIS(TRIPHENYLPHOSPHINE)COPPER (I) NITRATE DICHLOROMETHANE ADDUCT structure
|
Common Name | (1,10-PHENANTHROLINE)BIS(TRIPHENYLPHOSPHINE)COPPER (I) NITRATE DICHLOROMETHANE ADDUCT | ||
---|---|---|---|---|
CAS Number | 33989-10-5 | Molecular Weight | 915.26000 | |
Density | N/A | Boiling Point | N/A | |
Molecular Formula | C49H40Cl2CuN3O3P2 | Melting Point | 202-204°C | |
MSDS | N/A | Flash Point | N/A |
Name | (1,10-Phenanthroline)bis(triphenylphosphine)copper(I) nitrate dichloromethane adduct |
---|---|
Synonym | More Synonyms |
Melting Point | 202-204°C |
---|---|
Molecular Formula | C49H40Cl2CuN3O3P2 |
Molecular Weight | 915.26000 |
Exact Mass | 913.12200 |
PSA | 121.84000 |
LogP | 11.37570 |
Section1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE Product name: (1,10-Phenanthroline)bis(triphenylphosphine)copper(I) nitrate dichloromethane adduct Section2. HAZARDS IDENTIFICATION Classification of the substance or mixture According to Regulation (EC) No1272/2008 Skin irritation (Category 2)
Eye irritation (Category 2) Specific target organ toxicity - single exposure (Category 3) According to European Directive 67/548/EEC as amended. Irritating to eyes, respiratory system and skin. Label elements Pictogram Signal wordWarning Hazard statement(s) H315Causes skin irritation. H319Causes serious eye irritation. H335May cause respiratory irritation. Precautionary statement(s) P261Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray. P305 + P351 + P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Hazard symbol(s) XiIrritant R-phrase(s) R36/37/38Irritating to eyes, respiratory system and skin. S-phrase(s) S26In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36Wear suitable protective clothing. Other hazards - none Section3. COMPOSITION/INFORMATION ON INGREDIENTS Formula: C48H38CuN3O3P2 Molecular Weight: 830,33 g/mol CAS-No.EC-No.Index-No.ClassificationConcentration (1,10-Phenanthroline)bis(triphenylphosphine)copper(I) nitrate dichloromethane adduct 33989-10-5-- Skin Irrit. 2; Eye Irrit. 2; STOT - SE 3; H315, H319, H335 Xi, R36/37/38 For the full text of the H-Statements mentioned in this Section, see Section 16. Section4. FIRST AID MEASURES General advice Consult a physician. Show this safety data sheet to the doctor in attendance. If inhaled If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician. In case of skin contact Wash off with soap and plenty of water. Consult a physician. In case of eye contact Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician. If swallowed Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician. Section5. FIRE-FIGHTING MEASURES Suitable extinguishing media Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Special protective equipment for fire-fighters Wear self contained breathing apparatus for fire fighting if necessary. Section6. ACCIDENTAL RELEASE MEASURES Personal precautions Use personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust. Environmental precautions Do not let product enter drains. Methods and materials for containment and cleaning up Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed containers for disposal. Section7. HANDLING AND STORAGE Precautions for safe handling Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Provide appropriate exhaust ventilation at places where dust is formed. Normal measures for preventive fire protection. Conditions for safe storage Keep container tightly closed in a dry and well-ventilated place. Store in cool place. Section8. EXPOSURE CONTROLS/PERSONAL PROTECTION Personal protective equipment Respiratory protection For nuisance exposures use type P95 (US) or type P1 (EU EN 143) particle respirator.For higher level protection use type OV/AG/P99 (US) or type ABEK-P2 (EU EN 143) respirator cartridges. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Hand protection Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it. Eye protection Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Skin and body protection impervious clothing, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Hygiene measures Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday. Section9. PHYSICAL AND CHEMICAL PROPERTIES Appearance Formsolid Safety data pH no data available Melting point202 - 204 °C Boiling pointno data available Flash pointno data available Ignition temperature no data available Lower explosion limit no data available Upper explosion limit no data available Water solubilityno data available Section10. STABILITY AND REACTIVITY Chemical stability Stable under recommended storage conditions. Conditions to avoid no data available Materials to avoid Strong oxidizing agents Hazardous decomposition products Hazardous decomposition products formed under fire conditions. - Carbon oxides, nitrogen oxides (NOx), Oxides of phosphorus, Copper oxides Section11. TOXICOLOGICAL INFORMATION Acute toxicity no data available Skin corrosion/irritation no data available Serious eye damage/eye irritation no data available Respiratory or skin sensitization no data available Germ cell mutagenicity no data available Carcinogenicity IARC: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC. Reproductive toxicity no data available Specific target organ toxicity - single exposure Inhalation - May cause respiratory irritation. Specific target organ toxicity - repeated exposure no data available Aspiration hazard no data available Potential health effects InhalationMay be harmful if inhaled. Causes respiratory tract irritation. IngestionMay be harmful if swallowed. SkinMay be harmful if absorbed through skin. Causes skin irritation. EyesCauses serious eye irritation. Signs and Symptoms of Exposure To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. Additional Information RTECS: Not available Section12. ECOLOGICAL INFORMATION Toxicity no data available Persistence and degradability no data available Bioaccumulative potential no data available Mobility in soil no data available PBT and vPvB assessment no data available Other adverse effects no data available Section13. DISPOSAL CONSIDERATIONS Product Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed professional waste disposal service to dispose of this material. Dissolve or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber. Contaminated packaging Dispose of as unused product. Section14. TRANSPORT INFORMATION ADR/RID Not dangerous goods IMDG Not dangerous goods IATA Not dangerous goods SECTION 15 - REGULATORY INFORMATION N/A SECTION 16 - ADDITIONAL INFORMATION N/A |
Risk Phrases | 36/37/38 |
---|---|
Safety Phrases | 26-36/37/39 |
~74% (1,10-PHENANTHR... CAS#:33989-10-5 |
Literature: University of Massachusetts Patent: US7473786 B1, 2009 ; Location in patent: Page/Page column 15-16 ; US 7473786 B1 |
Precursor 1 | |
---|---|
DownStream 0 |
CuNO3(phen)(PPh3)2 |
(1,10-phenanthroline)bis(triphenylphosphine)copper(I) nitrate |
Cu(Phen)(PPh3)2NO3 |
nitratobis(triphenylphosphane)phenanthrolinecopper |
(1,10-PHENANTHROLINE)BIS(TRIPHENYLPHOSPHINE)COPPER (I) NITRATE DICHLOROMETHANE ADDUCT |
Cu(phen)(PPh3)2 |