ADIPIC ACID DIVINYL ESTER structure
|
Common Name | ADIPIC ACID DIVINYL ESTER | ||
|---|---|---|---|---|
| CAS Number | 4074-90-2 | Molecular Weight | 198.21600 | |
| Density | 1.039g/cm3 | Boiling Point | 261.1ºC at 760mmHg | |
| Molecular Formula | C10H14O4 | Melting Point | N/A | |
| MSDS | N/A | Flash Point | 122.2ºC | |
This table lists Chinese names, IUPAC names and various aliases of this chemical substance.
| Name | Divinyl Adipate |
|---|---|
| Synonym | More Synonyms |
This table shows physicochemical parameters including melting point, boiling point, density, solubility and optical rotation. Missing data is marked as N/A.
| Density | 1.039g/cm3 |
|---|---|
| Boiling Point | 261.1ºC at 760mmHg |
| Molecular Formula | C10H14O4 |
| Molecular Weight | 198.21600 |
| Flash Point | 122.2ºC |
| Exact Mass | 198.08900 |
| PSA | 52.60000 |
| LogP | 1.92020 |
| Index of Refraction | 1.451 |
| InChIKey | JZQAAQZDDMEFGZ-UHFFFAOYSA-N |
| SMILES | C=COC(=O)CCCCC(=O)OC=C |
This table provides MSDS information including hazard classification, first‑aid, fire‑fighting, spill handling, operation and storage instructions.
|
Divinyl Adipate (stabilized with MEHQ)
Revision number: 6
SAFETY DATA SHEET Section1. IDENTIFICATION Product name:Divinyl Adipate (stabilized with MEHQ) Revision number:6 Section2. HAZARDS IDENTIFICATION GHS classification PHYSICAL HAZARDSNot classified Not classified HEALTH HAZARDS ENVIRONMENTAL HAZARDSNot classified GHS label elements, including precautionary statements Pictograms or hazard symbolsNone No signal word Signal word Hazard statementsNone None Precautionary statements: Other hazards which do notMay cause polimerization. result in classification Section3. COMPOSITION/INFORMATION ON INGREDIENTS Substance/mixture:Substance Components:Divinyl Adipate (stabilized with MEHQ) Percent:>99.0%(GC) CAS Number:4074-90-2 Adipic Acid Divinyl Ester (stabilized with MEHQ) Synonyms: Chemical Formula:C10H14O4 Section4. FIRST AID MEASURES Inhalation:Remove victim to fresh air and keep at rest in a position comfortable for breathing. Get medical advice/attention if you feel unwell. Skin contact:Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. If skin irritation or rash occurs: Get medical advice/attention. Eye contact:Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. Get medical advice/attention if you feel unwell. Rinse mouth. Ingestion: Protection of first-aiders:A rescuer should wear personal protective equipment, such as rubber gloves and air- tight goggles. Section5. FIRE-FIGHTING MEASURES Suitable extinguishingDry chemical, foam, water spray, carbon dioxide. media: Specific hazards arising This substance may polimerize explosively when heated or involved in a fire. from the chemical:Container may explode when heated. Combat fire from a sheltered position. Divinyl Adipate (stabilized with MEHQ) Section5. FIRE-FIGHTING MEASURES Precautions for firefighters: Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place. In case of fire in the surroundings: Keep containers cool by spraying with water. Eliminate all ignition sources if safe to do so. Special protectiveWhen extinguishing fire, be sure to wear personal protective equipment. equipment for firefighters: Section6. ACCIDENTAL RELEASE MEASURES Use personal protective equipment. Keep people away from and upwind of spill/leak. Personal precautions, protective equipment and Entry to non-involved personnel should be controlled around the leakage area by emergency procedures: roping off, etc. Environmental precautions: Prevent product from entering drains. Methods and materials for Sweep dust to collect it into an airtight container, taking care not to disperse it. containment and cleaning Adhered or collected material should be promptly disposed of, in accordance with up: appropriate laws and regulations. Section7. HANDLING AND STORAGE Precautions for safe handling Handling is performed in a well ventilated place. Wear suitable protective equipment. Technical measures: Prevent dispersion of dust. Wash hands and face thoroughly after handling. Use a local exhaust if dust or aerosol will be generated. Advice on safe handling: Avoid contact with skin, eyes and clothing. Conditions for safe storage, including any incompatibilities Storage conditions:Keep container tightly closed. Store in a cool and dark place. Store away from incompatible materials such as oxidizing agents. Light-sensitive Packaging material:Comply with laws. Section8. EXPOSURE CONTROLS / PERSONAL PROTECTION Engineering controls:Install a closed system or local exhaust as possible so that workers should not be exposed directly. Also install safety shower and eye bath. Personal protective equipment Respiratory protection: Dust respirator. Follow local and national regulations. Hand protection:Protective gloves. Eye protection:Safety glasses. A face-shield, if the situation requires. Skin and body protection: Protective clothing. Protective boots, if the situation requires. Section9. PHYSICAL AND CHEMICAL PROPERTIES Solid Physical state (20°C): Form:Crystal- Lump Colour:White - Almost white Vanilla-like Odour: pH: No data available Melting point/freezing point:28°C (Freezing point) Boiling point/range:No data available No data available Flash point: Flammability or explosive limits: Lower:No data available No data available Upper: Vapour pressure:<0.1kPa/25°C No data available Relative density: Solubility(ies): No data available [Water] [Other solvents] Divinyl Adipate (stabilized with MEHQ) Section9. PHYSICAL AND CHEMICAL PROPERTIES Soluble:Methanol Section10. STABILITY AND REACTIVITY Chemical stability:Polymerization may occur under the influences of heat, light or on contact with polymelization initiators such as peroxides etc. Possibility of hazardous No special reactivity has been reported. reactions: Conditions to avoid:Heat, Light Incompatible materials: Oxidizing agents, Strong acids, Strong bases, Peroxides Hazardous decomposition Carbon monoxide, Carbon dioxide products: Section11. TOXICOLOGICAL INFORMATION Acute Toxicity:orl-gpg LD50:4300 mg/kg orl-mus LD50:6400 mg/kg orl-rat LD50:6400 mg/kg orl-rbt LD50:4300 mg/kg Skin corrosion/irritation: No data available Serious eyeNo data available damage/irritation: Germ cell mutagenicity: No data available Carcinogenicity: IARC =No data available NTP =No data available Reproductive toxicity:No data available RTECS Number:AV1800000 Section12. ECOLOGICAL INFORMATION Ecotoxicity: No data available Fish: Crustacea:No data available No data available Algae: Persistence / degradability: No data available No data available Bioaccumulative potential(BCF): Mobility in soil Log Pow:No data available No data available Soil adsorption (Koc): Henry's LawNo data available constant(PaM3/mol): Section13. DISPOSAL CONSIDERATIONS Recycle to process, if possible. Consult your local regional authorities. You may be able to dissolve or mix material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local regulations when disposing of the substance. Section14. TRANSPORT INFORMATION Hazards Class:Does not correspond to the classification standard of the United Nations Not listed UN-No: Section15. REGULATORY INFORMATION Safe management ordinance of dangerous chemical product (State Council announces on January 26, 2002 and revised on February 16,2011): Safe use and production, the storage of a dangerous chemical, transport, loading and unloading were prescribed. Divinyl Adipate (stabilized with MEHQ) SECTION 16 - ADDITIONAL INFORMATION N/A |
This table summarizes toxicological test data, acute & chronic toxicity and ecological hazard parameters for this chemical.
CHEMICAL IDENTIFICATION
HEALTH HAZARD DATAACUTE TOXICITY DATA
|
This table covers safety warnings, protective measures, incompatible substances and disposal guidelines for this compound.
| Safety Phrases | S23-S24/25 |
|---|
This table lists upstream starting materials and downstream derivative products related to this chemical.
| Precursor 7 | |
|---|---|
| DownStream 0 | |
This table collects all English aliases, systematic names and CAS‑related synonyms of the compound.
| bis(ethenyl) hexanedioate |
| Adipic Acid Divinyl Ester |
| EINECS 223-792-1 |
This section contains frequently‑asked‑questions about this compound, including basic parameters, properties, storage conditions and corresponding answers.
| Q: What are the upstream materials of Divinyl Adipate? |
| A: Related upstream materials(CAS) of Divinyl Adipate: 124-04-9;74-86-2;108-05-4;1119-20-6;75-07-0;111-50-2;5130-24-5. |
| Q: What is the polar surface area (PSA) of Divinyl Adipate? |
| A: Polar surface area (PSA) of Divinyl Adipate is 52.60000. |
| Q: What is the safety information for Divinyl Adipate? |
| A: Safety information for Divinyl Adipate: S23-S24/25. |
| Q: What is the InChIKey of Divinyl Adipate? |
| A: InChIKey of Divinyl Adipate is JZQAAQZDDMEFGZ-UHFFFAOYSA-N. |
| Q: What is the CAS number of Divinyl Adipate? |
| A: CAS number of Divinyl Adipate is 4074-90-2. |
| Q: What is the LogP of Divinyl Adipate? |
| A: LogP of Divinyl Adipate is 1.92020. |
| Q: What is the English name of Divinyl Adipate? |
| A: The English name of Divinyl Adipate is Divinyl Adipate. |
| Q: What is the molecular formula of Divinyl Adipate? |
| A: Molecular formula of Divinyl Adipate is C10H14O4. |
| Q: What is the boiling point of Divinyl Adipate? |
| A: Boiling point of Divinyl Adipate is 261.1ºC at 760mmHg. |
| Q: What is the SMILES notation of Divinyl Adipate? |
| A: SMILES notation of Divinyl Adipate is C=COC(=O)CCCCC(=O)OC=C. |
This table lists manufacturers and suppliers of this compound, including vendor names and product supply reference information.
| Shanghai Nianxing Industrial Co., Ltd |
| Dayang Chem (Hangzhou) Co., Ltd. |