Titanous chloride structure
|
Common Name | Titanous chloride | ||
---|---|---|---|---|
CAS Number | 7705-07-9 | Molecular Weight | 154.22600 | |
Density | 1.192 g/mL at 25 °C | Boiling Point | 100 °C | |
Molecular Formula | Cl3Ti | Melting Point | 440 °C (dec.)(lit.) | |
MSDS | Chinese USA | Flash Point | N/A | |
Symbol |
GHS02, GHS05 |
Signal Word | Danger |
Name | Titanium(III) chloride |
---|---|
Synonym | More Synonyms |
Density | 1.192 g/mL at 25 °C |
---|---|
Boiling Point | 100 °C |
Melting Point | 440 °C (dec.)(lit.) |
Molecular Formula | Cl3Ti |
Molecular Weight | 154.22600 |
Exact Mass | 152.85500 |
LogP | 2.06850 |
Index of Refraction | 1.4856 (25ºC) |
Stability | Stable, but reacts violently with water and is spontaneously flammable in air. |
Water Solubility | Soluble |
CHEMICAL IDENTIFICATION
HEALTH HAZARD DATAACUTE TOXICITY DATA
|
Symbol |
GHS02, GHS05 |
---|---|
Signal Word | Danger |
Hazard Statements | H250-H314 |
Supplemental HS | Reacts violently with water. |
Precautionary Statements | P222-P231-P280-P305 + P351 + P338-P310-P422 |
Personal Protective Equipment | Eyeshields;Faceshields;full-face particle respirator type N100 (US);Gloves;respirator cartridge type N100 (US);type P1 (EN143) respirator filter;type P3 (EN 143) respirator cartridges |
Hazard Codes | C:Corrosive; |
Risk Phrases | R35 |
Safety Phrases | S6-S26-S30-S36/37/39-S43-S45 |
RIDADR | UN 3264 8/PG 2 |
WGK Germany | 3 |
RTECS | XR1924000 |
Packaging Group | II |
Hazard Class | 8 |
Precursor 9 | |
---|---|
DownStream 10 | |
Environmental fate of the next generation refrigerant 2,3,3,3-tetrafluoropropene (HFO-1234yf).
Environ. Sci. Technol. 48(22) , 13181-7, (2014) The hydrofluoroolefin 2,3,3,3-tetrafluoropropene (HFO-1234yf) has been introduced to replace 1,1,1,2-tetrafluoroethane (HFC-134a) as refrigerant in mobile, including vehicle, air conditioning systems ... |
|
SnCl2/TiCl3-mediated deoximation of oximes in an aqueous solvent.
Molecules 17(3) , 2464-73, (2012) A simple procedure for SnCl(2)/TiCl(3)-mediated deoximation of ketoximes in an aqueous solvent is reported. Under the conditions developed in this effort, various ketones and aldehydes are produced in... |
|
[Studies on "Fast Green FCF Standard" for the dye standard on the National Institute of Health Sciences].
Eisei Shikenjo Hokoku. (114) , 136-7, (1996) The raw material for Fast Green FCF was tested for preparation of the "Fast Green FCF Standard (C.I. 42053)". Analytical data obtained were as follows: paper chromatography, only one spot is observed;... |
Titanous chloride |
EINECS 231-728-9 |
MFCD00011266 |