聚丁二烯

Talanta 85(3) , 1648-57, (2011)

This report compares the performance of polymer and carbon nanotube-polymer composite membranes on a quartz crystal microbalance (QCM) sensor for the detection of aromatic hydrocarbons (benzene, toluene, ethylbenzene, p-xylene and naphthalene) in aqueous solu...

J. Am. Chem. Soc. 134(30) , 12685-92, (2012)

Nanostructured inverse hexagonal polyoxometalate composite films were cast directly from solution using poly(butadiene-block-2-(dimethylamino)ethyl methacrylate) (PB-b-PDMAEMA) diblock copolymers as structure directing agents for phosphomolybdic acid (H(3)[PM...

Nanoscale 3(1) , 288-97, (2011)

We present a detailed study on the preparation of compartmentalized cylindrical nanoparticles via a templated approach: the polybutadiene part of a linear polybutadiene-block-poly(2-vinyl pyridine)-block-poly(tert-butyl methacrylate) block terpolymer, B420V28...

J. Hazard. Mater. 229-230 , 251-7, (2012)

Migration appeared in the interfaces of nitrate ester plasticized polyether (NEPE) based propellant/hydroxyl-terminated polybutadiene (HTPB) based liner/ethylene propylene terpolymer (EPDM) based insulation was studied by aging at different temperatures. The ...

Chemosphere 91(7) , 935-40, (2013)

This paper reports an investigation into the effect of a number of operating factors on the removal of Acid Blue 92 (AB92) from an aqueous solution using hydroxyl-terminated polybutadiene (HTPB) as an adsorbent. The optimum values of adsorbent dose and pH wer...

J. Chromatogr. A. 1253 , 164-70, (2012)

In this study, the coupling of IGC-ID analysis and carbon blacks impregnation with increasing ratios of polymer allow us to highlight the affinity of the polymer to the solid surface. The variations of the dispersive component of the surface energy and of the...

ACS Nano 4(10) , 5609-16, (2010)

We report on the quasi in situ scanning force microscopy nanotomography which proved to be a key method to effectively obtain a three-dimensional (3D) microdomain structure of a complex ABC triblock morphology. As an example, we studied polybutadiene-block-po...

J. Nanosci. Nanotechnol. 13(1) , 577-81, (2013)

Thermal and mechanical properties of PU/POSS nanocomposites plasticized with DOA were investigated. These hybrid materials were prepared using one-step method through the incorporation of flexible HTPB prepolymer, reactive or non-reactive POSS nanoparticle, a...

Chem. Commun. (Camb.) 47(4) , 1196-7, (2011)

Blue light-emitting Au nanoclusters were synthesized in a simple one-pot process via reflux of Au ions with amino-terminated poly(1,2-butadiene) in toluene. DLS results and photoemission spectra showed that Au(8) nanoclusters were successfully formed. Moreove...

J. Phys. Chem. B 115(16) , 4689-95, (2011)

We present the results of coarse grained molecular dynamics simulation using a charge free model that is able to capture different regions of the morphological phase diagram of charged diblock copolymers. Specifically, we were able to reproduce many phases of...