Zardaverine

Modify Date: 2024-01-06 15:03:46

Zardaverine Structure
Zardaverine structure
Common Name Zardaverine
CAS Number 101975-10-4 Molecular Weight 268.216
Density 1.4±0.1 g/cm3 Boiling Point N/A
Molecular Formula C12H10F2N2O3 Melting Point N/A
MSDS Chinese USA Flash Point N/A

 Use of Zardaverine


Zardaverine is a newly developed dual-selective PDE3/4 inhibitor with IC50 values of 0.5 uM and 0.8 uM respectively. IC50 value: 0.5 uM (PDE3); 0.8 uM (PDE4)Target: PDE3; PDE4Zardaverine inhibited the cyclic GMP-inhibitable PDE III from human platelets and the rolipram-inhibitable PDE IV from canine trachea and human polymorphonuclear (PMN) cells with IC50-values of 0.58, 0.79 and 0.17 μM, respectively. The pyridazinone derivative affected the calmodulin-stimulated PDE I, the cyclic GMP-stimulated PDE II and the cyclic GMP-specific PDE V only marginally at concentrations up to 100μM. Zardaverine inhibits the ADP-induced aggregation of human platelets with an IC50 of 1.6 μM. This inhibition was synergistically increased by activators of adenylate cyclase such as PGE1 and forskolin. In human PMN cells, Zardaverine inhibited the zymosan-induced superoxide anion generation with an IC50 of 0.40 μM. Again, this effect was increased by activators of adenylate cyclase. Zardaverine acted in synergy with the adenylate cyclase activators prostaglandin E2 and CG 4203, a prostacyclin analog, and super-additive effects of combinations were observed. Zardaverine and dexamethasone prevent bronchial eosinophilia and neutrophilia with similar dosage of 30 microM/kg orally, suggesting that this PDE III/IV inhibitor may be useful for both, bronchorelaxation and reduction of inflammation in asthma therapy.

 Names

Name zardaverine
Synonym More Synonyms

 Zardaverine Biological Activity

Description Zardaverine is a newly developed dual-selective PDE3/4 inhibitor with IC50 values of 0.5 uM and 0.8 uM respectively. IC50 value: 0.5 uM (PDE3); 0.8 uM (PDE4)Target: PDE3; PDE4Zardaverine inhibited the cyclic GMP-inhibitable PDE III from human platelets and the rolipram-inhibitable PDE IV from canine trachea and human polymorphonuclear (PMN) cells with IC50-values of 0.58, 0.79 and 0.17 μM, respectively. The pyridazinone derivative affected the calmodulin-stimulated PDE I, the cyclic GMP-stimulated PDE II and the cyclic GMP-specific PDE V only marginally at concentrations up to 100μM. Zardaverine inhibits the ADP-induced aggregation of human platelets with an IC50 of 1.6 μM. This inhibition was synergistically increased by activators of adenylate cyclase such as PGE1 and forskolin. In human PMN cells, Zardaverine inhibited the zymosan-induced superoxide anion generation with an IC50 of 0.40 μM. Again, this effect was increased by activators of adenylate cyclase. Zardaverine acted in synergy with the adenylate cyclase activators prostaglandin E2 and CG 4203, a prostacyclin analog, and super-additive effects of combinations were observed. Zardaverine and dexamethasone prevent bronchial eosinophilia and neutrophilia with similar dosage of 30 microM/kg orally, suggesting that this PDE III/IV inhibitor may be useful for both, bronchorelaxation and reduction of inflammation in asthma therapy.
Related Catalog
References

[1]. R.T. Schermuly, H. Leuchte, H.A. Ghofrani, et al. Zardaverine and aerosolised iloprost in a model of acute respiratoryfailure. ERJ, 2003 ,22 (2): 342-347.

[2]. D. Ukena, K. Rentz, C. Reiber, et al. Effects of the mixed phosphodiesterase III/IV inhibitor, zardaverine, on airway function in patients with chronic airflow obstruction. Respiratory Medicine.1995, 89 ( 6) : 441-444.

[3]. Schade FU, Schudt C. The specific type III and IV phosphodiesterase inhibitor zardaverine suppresses formation of tumor necrosis factor by macrophages. European Journal of Pharmacology.1993, 230(1):9-14.

 Chemical & Physical Properties

Density 1.4±0.1 g/cm3
Molecular Formula C12H10F2N2O3
Molecular Weight 268.216
Exact Mass 268.065948
PSA 64.21000
LogP 0.90
Index of Refraction 1.555
Storage condition 2-8℃

 MSDS


Section1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE
Product identifiers
Product name: Zardaverine
CAS-No.: 101975-10-4
Relevant identified uses of the substance or mixture and uses advised against
Identified uses: Laboratory chemicals, Manufacture of substances



Section2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Label elements
The product does not need to be labelled in accordance with EC directives or respective national laws.
Other hazards - none

Section3. COMPOSITION/INFORMATION ON INGREDIENTS
Substances
Synonyms: 6-(4-Difluoromethoxy-3-methoxyphenyl)-3(2H)-pyridazinone
Formula: C12H10F2N2O3
Molecular Weight: 268,22 g/mol

Section4. FIRST AID MEASURES
Description of first aid measures
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration.
In case of skin contact
Wash off with soap and plenty of water.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water.
Most important symptoms and effects, both acute and delayed
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.
Indication of any immediate medical attention and special treatment needed
no data available

Section5. FIREFIGHTING MEASURES
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Carbon oxides, nitrogen oxides (NOx), Hydrogen fluoride
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available

Section6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Avoid dust formation. Avoid breathing vapors, mist or gas.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Sweep up and shovel. Keep in suitable, closed containers for disposal.
Reference to other sections
For disposal see section 13.

Section7. HANDLING AND STORAGE
Precautions for safe handling
Provide appropriate exhaust ventilation at places where dust is formed.Normal measures for preventive fire
protection.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Specific end uses
no data available

Section8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
General industrial hygiene practice.
Personal protective equipment
Eye/face protection
Use equipment for eye protection tested and approved under appropriate government standards
such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
Choose body protection in relation to its type, to the concentration and amount of dangerous
substances, and to the specific work-place., The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Respiratory protection is not required. Where protection from nuisance levels of dusts are desired,
use type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and
approved under appropriate government standards such as NIOSH (US) or CEN (EU).

Section9. PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
a) AppearanceForm: solid
b) Odourno data available
c) Odour Thresholdno data available
d) pHno data available
e) Melting point/freezingno data available
point
f) Initial boiling point and no data available
boiling range
g) Flash pointno data available
h) Evaporation rateno data available
i) Flammability (solid, gas) no data available
j) Upper/lowerno data available
flammability or
explosive limits
k) Vapour pressureno data available
l) Vapour densityno data available
m) Relative densityno data available
n) Water solubilityno data available
o) Partition coefficient: n- no data available
octanol/water
p) Autoignitionno data available
temperature
q) Decompositionno data available
temperature
r) Viscosityno data available
s) Explosive propertiesno data available
t) Oxidizing propertiesno data available
Other safety information
no data available

Section10. STABILITY AND REACTIVITY
Reactivity
no data available
Chemical stability
no data available
Possibility of hazardous reactions
no data available
Conditions to avoid
no data available
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
Other decomposition products - no data available

Section11. TOXICOLOGICAL INFORMATION
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC:No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Potential health effects
Inhalation
May be harmful if inhaled. May cause respiratory tract irritation.
IngestionMay be harmful if swallowed.
SkinMay be harmful if absorbed through skin. May cause skin irritation.
EyesMay cause eye irritation.
Signs and Symptoms of Exposure
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.
Additional Information
RTECS: Not available

Section12. ECOLOGICAL INFORMATION
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
no data available
Other adverse effects
no data available

Section13. DISPOSAL CONSIDERATIONS
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company.
Contaminated packaging
Dispose of as unused product.

Section14. TRANSPORT INFORMATION
UN number
ADR/RID: -IMDG: -IATA: -
UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA:Not dangerous goods
Transport hazard class(es)
ADR/RID: -IMDG: -IATA: -
Packaging group
ADR/RID: -IMDG: -IATA: -
Environmental hazards
ADR/RID: noIMDG Marine pollutant: noIATA: no
Special precautions for user
no data available



SECTION 15 - REGULATORY INFORMATION
N/A


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

Personal Protective Equipment Eyeshields;Gloves;type N95 (US);type P1 (EN143) respirator filter
RIDADR NONH for all modes of transport

 Synthetic Route

~%

Zardaverine Structure

Zardaverine

CAS#:101975-10-4

Literature: US4665074 A1, ;

 Precursor & DownStream

Precursor  1

DownStream  0

 Articles29

More Articles
Uncovering caffeine's adenosine A2A receptor inverse agonism in experimental parkinsonism.

ACS Chem. Biol. 9(11) , 2496-501, (2014)

Caffeine, the most consumed psychoactive substance worldwide, may have beneficial effects on Parkinson's disease (PD) therapy. The mechanism by which caffeine contributes to its antiparkinsonian effec...

Dopamine receptors D3 and D5 regulate CD4(+)T-cell activation and differentiation by modulating ERK activation and cAMP production.

J. Neuroimmunol. 284 , 18-29, (2015)

Dopamine receptors have been described in T-cells, however their signalling pathways coupled remain unknown. Since cAMP and ERKs play key roles regulating T-cell physiology, we aim to determine whethe...

Phenotype-based screening of mechanistically annotated compounds in combination with gene expression and pathway analysis identifies candidate drug targets in a human squamous carcinoma cell model.

J. Biomol. Screen. 11(5) , 457-68, (2006)

The squamous cell carcinoma HeLa cell line and an epithelial cell line hTERT-RPE with a nonmalignant phenotype were interrogated for HeLa cell selectivity in response to 1267 annotated compounds repre...

 Synonyms

3-[4-(difluoromethoxy)-3-methoxyphenyl]-1H-pyridazin-6-one
3-pyridazinol, 6-[4-(difluoromethoxy)-3-methoxyphenyl]-
Zardaverine
3(2H)-Pyridazinone, 6-[4-(difluoromethoxy)-3-methoxyphenyl]-
6-[4-(Difluoromethoxy)-3-methoxyphenyl]-3(2H)-pyridazinone
zardaverinum
zardaverina
6-[4-(Difluoromethoxy)-3-methoxyphenyl]pyridazin-3(2H)-one
Top Suppliers:I want be here
  • DC Chemicals Limited
  • China
  • Product Name: Zardaverine
  • Price: $Inquiry/100mg $Inquiry/250mg $Inquiry/500mg
  • Purity: 98.0%
  • Stocking Period: 3 Day
  • Contact: Tony Cao


Get all suppliers and price by the below link:

Zardaverine suppliers


Price: $77/10mM*1mLinDMSO

Reference only. check more Zardaverine price

Hot Compounds More...
Dichloromethane
CAS#:75-09-2
Polyacrylic acid
CAS#:9003-01-4
sodium carbonate
CAS#:497-19-8
Silicon dioxide
CAS#:7631-86-9
Triethanolamine
CAS#:102-71-6
Demeton
CAS#:126-75-0
Water
CAS#:7732-18-5
4-(4-Piperidinyl)morpholine dihydrochloride
CAS#:53617-35-9
Diclofenac sodium
CAS#:15307-79-6
Budesonide
CAS#:51372-29-3