Titanium Boride

Titanium Boride Structure
Titanium Boride structure
Common Name Titanium Boride
CAS Number 12045-63-5 Molecular Weight 73.52080
Density 4.52 g/mL at 25 °C(lit.) Boiling Point N/A
Molecular Formula B2H4Ti Melting Point 2900-3225ºC
MSDS Chinese USA Flash Point N/A
Symbol GHS07
GHS07
Signal Word Warning

A facile one-step solvothermal synthesis of graphene/rod-shaped TiO₂ nanocomposite and its improved photocatalytic activity.

Nanoscale 4(15) , 4641-9, (2012)

Graphene sheets were obtained through solvothermal reduction of colloidal dispersion of graphene oxide in benzyl alcohol. The graphene/rod-shaped TiO(2) nanocomposite was synthesized by this novel and facile solvothermal method. During the solvothermal reacti...

[The degradation of dye X-3B in photocatalysis enhanced by the electric field].

Huan Jing Ke Xue 23(6) , 108-10, (2002)

Using 365 nm and 254 nm UV lamp as light source, the degradation of dye X-3B in photolysis, photocatalysis and electrical enhanced photocatalysis was studied in this research. The result shows that the degradation rate of photocatalysis of X-3B was faster tha...

A photoelectrochemical immunosensor based on Au-doped TiO2 nanotube arrays for the detection of α-synuclein.

Chemistry 16(48) , 14439-46, (2010)

α-Synuclein (α-SYN) is a very important neuronal protein that is associated with Parkinson's disease. In this paper, we utilized Au-doped TiO(2) nanotube arrays to design a photoelectrochemical immunosensor for the detection of α-SYN. The highly ordered TiO(2...

Study on aluminium-based single films.

Phys. Chem. Chem. Phys. 9(48) , 6415-25, (2007)

In the present paper the authors studied isolated metallic films made from the same material used for making metallic foams, and then characterised their properties. Metal films were made from a liquid aluminium alloy reinforced with ceramic particles of know...

Adsorption of fibronectin, fibrinogen, and albumin on TiO2: time-resolved kinetics, structural changes, and competition study.

Biointerphases 7(1-4) , 48, (2012)

An understanding of protein adsorption process is crucial for designing biomaterial surfaces. In this work, with the use of a quartz-crystal microbalance with dissipation monitoring, we researched the following: (a) the kinetics of adsorption on TiO(2) surfac...

Blood haemolysis by ceramics.

Biomaterials 14(2) , 107-10, (1993)

Ceramics are more and more frequently under consideration for construction of blood-contacting devices, i.e. cardiac valves or cardiac assist devices. This study evaluated the haemolysis eventually initiated in vitro by ceramic powders (Al2O3, ZrO2/Y2O3, AlN,...

Influence of in situ TiB reinforcements and role of heat treatment on mechanical properties and biocompatibility of β Ti-alloys.

J. Mech. Behav. Biomed. Mater. 10 , 1-12, (2012)

The effect of heat treatment on the mechanical properties of Ti-35Nb-5.7Ta-7.2Zr (TNZT) and Ti-35Nb-5.7Ta-7.2Zr-0.5B (TNZTB) alloys has been investigated. In the case of TNZT alloy, the presence of ω phase in the matrix has a greater effect on strength and ha...

Photoinduced superhydrophilic properties of Ti-B binary oxide thin films and their photocatalytic reactivity for the decomposition of NO.

J. Nanosci. Nanotechnol. 1(3) , 337-42, (2001)

Characterizations of Ti-B binary oxide thin films by means of various spectroscopic measurements have shown that Ti-B binary oxide thin films are formed by ultra fine TiO2 nanoparticles. A dramatic decrease in the contact angle of water droplets to 0 degree u...

Effect of the disinfection agents chlorine, UV irradiation, silver ions, and TiO2 nanoparticles/near-UV on DNA molecules.

Water Sci. Technol. 64(6) , 1226-32, (2011)

Extracellular DNA in municipal wastewater and effluents from hospitals and R&D laboratories contains antimicrobial resistance and recombinant genes that are today considered as a new class of emerging contaminants. The objective of this research was to invest...